Bosch PSB 570 RE manual

Bosch PSB 570 RE
8.5 · 8
PDF manual
 · 62 pages
English
manualBosch PSB 570 RE
Robert Bosch GmbH
Power Tools Division
70745 Leinfelden-Echterdingen
Germany
www.bosch-pt.com
2 609 006 498 (2012.07) O / 63 WEU

WEU WEU

PSB

570 RE

de Originalbetriebsanleitung
en Original instructions
fr Notice originale
es Manual original
pt Manual original
it Istruzioni originali
nl Oorspronkelijke
gebruiksaanwijzing
da Original brugsanvisning
sv Bruksanvisning i original
no Original driftsinstruks
fi Alkuperäiset ohjeet
el Ðñùôüôõðï ïäçãéþí ÷ñÞóçò
tr Orijinal işletme talimat
OBJ_DOKU-31232-001.fm Page 1 Monday, July 23, 2012 3:09 PM

View the manual for the Bosch PSB 570 RE here, for free. This manual comes under the category drill machines and has been rated by 8 people with an average of a 8.5. This manual is available in the following languages: English. Do you have a question about the Bosch PSB 570 RE or do you need help? Ask your question here

Need help?

Do you have a question about the Bosch and is the answer not in the manual?

  • Receive updates on solutions
  • Get answers to your question

Question and answer

Number of questions: 9
R
RanleyMarch 3, 2015

Does the Bosch 570 RE have a clutch and if so does it contain asbestos? I am still waiting for the answer to this question.

I
IvanJanuary 16, 2016

How do I remove the chuck ( keyless ). There is no screw in the centre at the back of the jaws. Also, if it can be removed, can I replace it with a keyed chuck.

W
Walter JamesApril 15, 2015

How do you remove the drill chuck to enable it to be replaced?

P
Patrick March 6, 2016

My drill bit seems stuck. Perhaps rusted in slightly. Any suggestions ?

1 comment
M
Maithri October 26, 2020

My drill bit is stuck

P
Patrick HughesDecember 25, 2014

My manual for my new Bosch PSB 570 RE drill does not have English instructions. Please email me the manual including the English instructions. Thank you for your help.

R
RanleyMarch 2, 2015

Does the Bosch PSB 570 RE have asbestos in its clutch?

J
Jayne DaltonAugust 5, 2015

I can not down load your manual for a bosch drill model psb 570re as our corporate anti virus system will not allow me. please could you email it to me thank you.

J
Jean-Pierre July 25, 2022

My bosch PSB570RE does not work and the wiring on the switch is wrong

D
DawnNovember 6, 2022

how to use hammer mode

The Bosch PSB 570 RE drill machine is a versatile tool designed for various drilling tasks. With a maximum torque of 7.5 N⋅m, it offers sufficient power to handle most drilling jobs. Equipped with a hammer drilling feature, this drill machine is suitable for concrete applications. It can drill holes up to 10 millimeters in diameter in both steel and concrete, making it suitable for a range of projects. Additionally, it is capable of drilling holes with a maximum diameter of 20 millimeters in wood. Featuring a soft grip, the Bosch PSB 570 RE provides comfort and ease of use during operation. This ergonomic design reduces strain on the user's hand, allowing for extended use without discomfort. With an output power of 228 watts and an input power of 570 watts, this drill machine offers a good balance between performance and energy efficiency. Its AC power source ensures a reliable and consistent power supply. Weighing 1600 grams, the Bosch PSB 570 RE is lightweight and portable, making it easy to maneuver and transport between different job sites. Overall, the Bosch PSB 570 RE drill machine combines power, versatility, and ergonomic design to offer an efficient drilling experience. Whether working on steel, concrete, or wood, this drill machine is a reliable choice for both professional and DIY users.

General
BrandBosch
ModelPSB 570 RE | 0 603 127 006
Productdrill machine
EAN3165140713832
LanguageEnglish
FiletypeUser manual (PDF)
Features
Chuck type-
Hammer drillingYes
Soft gripYes
Performance
Torque (max)7.5 N⋅m
Drilling diameter in steel (max)10 mm
Drilling diameter in concrete (max)10 mm
Drilling diameter in wood (max)20 mm
Power
Output power228 W
Input power570 W
Power sourceAC
Weight & dimensions
Weight1600 g
show more

Can't find the answer to your question in the manual? You may find the answer to your question in the FAQs about the Bosch PSB 570 RE below.

How do I remove rust from my Bosch drill machine?

1. Soak the rusty part in vinegar until completely soaked through. 2. Let the vinegar work on the rust for 24 hours. 3. Remove the rust with a wire brush or aluminium foil.

What does '16V' or '20V' mean?

The maximum achievable charge level is expressed with 16V or 20V. The V in this case stands for Volt.

Do I have to wear hearing protection when using a drill machine?

The amount of sound varies a lot per brand and type of drill machine, it is therefore wise to wear hearing protection to be sure.

What is the weight of the Bosch PSB 570 RE?

The Bosch PSB 570 RE has a weight of 1600 g.

How do I adjust the torque settings on the Bosch PSB 570 RE drill machine?

To adjust the torque settings on the Bosch PSB 570 RE, locate the torque control ring behind the chuck. Twist it to the desired torque level indicated by the numbers or symbols.

How can I switch the drill machine's rotation direction?

To switch the rotation direction of the Bosch PSB 570 RE drill machine, locate the forward/reverse lever near the trigger. Slide it to the desired position to change the direction of rotation.

What is the maximum drilling capacity of the Bosch PSB 570 RE?

The maximum drilling capacity of the Bosch PSB 570 RE is 13 millimeters in concrete, 10 millimeters in steel, and 25 millimeters in wood.

How do I change the drill bits on the Bosch PSB 570 RE?

To change the drill bits on the Bosch PSB 570 RE, first, ensure the machine is turned off and unplugged. Then, press and hold the spindle lock button located above the chuck, and use the chuck key provided to loosen or tighten the chuck jaws according to your desired drill bit size.

What is the recommended speed for different materials on the Bosch PSB 570 RE?

The Bosch PSB 570 RE has a variable speed control depending on the material. For example, if you are drilling in wood, it is recommended to use a slower speed setting, while for drilling in metal or concrete, a higher speed setting is appropriate. Adjust the speed using the speed control dial located on the top of the drill machine near the handle.

Does the Bosch PSB 570 RE have a maximum torque of 7.5 N⋅m?

Yes, the Bosch PSB 570 RE has a maximum torque of 7.5 N⋅m. This means that it offers a good amount of twisting force for tasks that require extra power.

Can the Bosch PSB 570 RE perform hammer drilling?

Yes, the Bosch PSB 570 RE can perform hammer drilling. This feature allows for easier and more efficient drilling into materials such as concrete.

What is the maximum drilling diameter in steel for the Bosch PSB 570 RE?

The maximum drilling diameter in steel for the Bosch PSB 570 RE is 10 mm. This means that it is capable of drilling holes of up to 10 mm in diameter in steel.

Is the maximum drilling diameter in concrete 10 mm for the Bosch PSB 570 RE?

Yes, the maximum drilling diameter in concrete for the Bosch PSB 570 RE is 10 mm. This makes it suitable for drilling holes of up to 10 mm in diameter in concrete.

Does the Bosch PSB 570 RE have a soft grip?

Yes, the Bosch PSB 570 RE has a soft grip. This feature provides added comfort and better control during use, making it easier for the user to handle the drill machine.

Is the manual of the Bosch PSB 570 RE available in English?

Yes, the manual of the Bosch PSB 570 RE is available in English .

Is your question not listed? Ask your question here

No results