Bosch PSB 530 RE manual

Bosch PSB 530 RE
7.9 · 3
PDF manual
 · 70 pages
English
manualBosch PSB 530 RE
Robert Bosch GmbH
Power Tools Division
70745 Leinfelden-Echterdingen
Germany
www.bosch-pt.com
2 609 007 741 (2013.11) O / 71 WEU

WEU WEU

PSB

530 RE | 500 RE

de Originalbetriebsanleitung
en Original instructions
fr Notice originale
es Manual original
pt Manual original
it Istruzioni originali
nl Oorspronkelijke
gebruiksaanwijzing
da Original brugsanvisning
sv Bruksanvisning i original
no Original driftsinstruks
fi Alkuperäiset ohjeet
el Πρωτότυπο οδηγιών χρήσης
tr Orijinal işletme talimatı
ar
ςТЎϩХʉ ЌТϾϦφЍʉ ʌμВТЎϺυ
OBJ_DOKU-31221-002.fm Page 1 Monday, November 4, 2013 3:14 PM

View the manual for the Bosch PSB 530 RE here, for free. This manual comes under the category drill machines and has been rated by 3 people with an average of a 7.9. This manual is available in the following languages: English. Do you have a question about the Bosch PSB 530 RE or do you need help? Ask your question here

Need help?

Do you have a question about the Bosch and is the answer not in the manual?

  • Receive updates on solutions
  • Get answers to your question

Question and answer

Number of questions: 1
P
prabakar.sJanuary 3, 2015

what is size of machine?.drilling dia in concrete is how much?

General
BrandBosch
ModelPSB 530 RE | 0 603 127 005
Productdrill machine
EAN3165140713818
LanguageEnglish
FiletypeUser manual (PDF)
Features
Chuck typeKey
Hammer drillingYes
Soft gripYes
ReverseYes
Performance
Torque (max)7.5 N⋅m
Idle speed (max)3000 RPM
Screw diameter (max)5 mm
Impact rate (high speed)33000 bpm
Drilling diameter in steel (max)10 mm
Drilling diameter in wood (max)20 mm
Drilling diameter in concrete (max)10 mm
Vibration level (metal drilling)4 m/s²
Sound pressure level97 dB
Sound level uncertainty3 dB
Sound power level108 dB
Technical details
Yes
Uncertainty K1.5 m/s²
Product colorBlack, Green, Red
Power
Input power530 W
Output power228 W
Power sourceAC
Weight & dimensions
Weight1600 g
show more

Can't find the answer to your question in the manual? You may find the answer to your question in the FAQs about the Bosch PSB 530 RE below.

How do I remove rust from my Bosch drill machine?

1. Soak the rusty part in vinegar until completely soaked through. 2. Let the vinegar work on the rust for 24 hours. 3. Remove the rust with a wire brush or aluminium foil.

What does '16V' or '20V' mean?

The maximum achievable charge level is expressed with 16V or 20V. The V in this case stands for Volt.

Do I have to wear hearing protection when using a drill machine?

The amount of sound varies a lot per brand and type of drill machine, it is therefore wise to wear hearing protection to be sure.

What is the weight of the Bosch PSB 530 RE?

The Bosch PSB 530 RE has a weight of 1600 g.

Does the Bosch PSB 530 RE have a key chuck type?

Yes, the Bosch PSB 530 RE has a key chuck type. This means that the user can easily change drill bits with the help of a key.

What is the maximum torque of the Bosch PSB 530 RE?

The maximum torque of the Bosch PSB 530 RE is 7.5 N⋅m. This is a decent torque level for a drill machine, allowing for effective drilling and screwdriving tasks.

Is the Bosch PSB 530 RE suitable for hammer drilling?

Yes, the Bosch PSB 530 RE is suitable for hammer drilling. This feature allows the user to drill through tougher materials like concrete with ease.

What is the maximum drilling diameter in wood for the Bosch PSB 530 RE?

The maximum drilling diameter in wood for the Bosch PSB 530 RE is 20 mm. This is a good size for various woodworking tasks.

What is the input power of the Bosch PSB 530 RE?

The input power of the Bosch PSB 530 RE is 530 W. This indicates a decent power level for a drill machine, allowing for efficient drilling and screwdriving operations.

How can I ensure a secure grip and stance while using the Bosch PSB 530 RE drill machine?

To ensure a secure grip and stance while using the Bosch PSB 530 RE drill machine, follow these steps: 1. Use the additional handle, if provided with the power tool. This will help you maintain control and prevent injuries. 2. Hold the power tool using the insulated gripping surfaces when working in areas where the tool's accessory may come into contact with live wires or the power tool's own cable. Contact with a live wire can result in electric shock. 3. Use suitable detection devices to locate hidden power lines or consult the local utility company. Contact with electrical wires can lead to fire and electric shock. 4. Immediately switch off the power tool if the accessory becomes jammed. Be prepared for high reaction forces when the tool is operating, as this can cause kickback. The accessory may become jammed if the power tool is overloaded or if it gets stuck in the workpiece. 5. Maintain a firm grip on the power tool. When tightening or loosening screws, there may be short, high reaction forces. 6. Always hold the machine with both hands and ensure a stable position while working. Use both hands to operate the power tool safely. 7. Secure the workpiece using clamps or other suitable devices rather than relying on your hand alone. 8. Only place the power tool down when it has come to a complete stop. The accessory may become jammed, leading to a loss of control over the power tool. By following these steps, you can ensure a secure grip and stance while using the Bosch PSB 530 RE drill machine.

What are the recommended clamp devices or vices to secure the workpiece for better stability?

To secure the workpiece for better stability while using the Bosch PSB 530 RE drill machine, you can use the following clamp devices or vices: 1. Clamp devices: Use a variety of clamp devices such as quick-release clamps, bar clamps, or C-clamps. These devices can securely hold the workpiece in place, preventing it from moving or shifting during drilling. 2. Bench vise: A bench vise is a stationary tool that can be mounted on a workbench or table. It provides a stable and secure grip on the workpiece, allowing you to drill with precision and control. 3. Drill press vise: If you have a drill press, you can use a drill press vise. This specialized vise is designed to be mounted on the drill press table and provides a secure grip on the workpiece while allowing for precise drilling. 4. Magnetic vise: A magnetic vise uses powerful magnets to hold the workpiece in place. It is particularly useful when working with metal materials that are attracted to magnets. By using these recommended clamp devices or vices, you can ensure that the workpiece remains stable and secure during drilling operations with the Bosch PSB 530 RE drill machine.

How long should I wait for the machine to come to a complete stop before placing it down to avoid loss of control?

To ensure a complete stop before placing the Bosch PSB 530 RE drill machine down, follow these steps: 1. After completing your drilling task, release the power switch or trigger to turn off the drill machine. 2. Wait for the drill bit to come to a complete stop before placing the machine down. This will prevent any accidental movement or rotation of the drill bit, reducing the risk of injury or damage. 3. Avoid placing the drill machine down immediately after drilling, as the drill bit may still be spinning or have residual momentum. 4. Allow the drill machine to cool down for a few minutes after prolonged use at low speeds. This can be done by running the drill machine at maximum speed without any load for approximately 3 minutes. 5. Once the drill machine has come to a complete stop and has cooled down, you can safely place it down on a stable surface. By following these steps, you can ensure a safe and controlled handling of the Bosch PSB 530 RE drill machine.

What type of plug should I use for my socket outlets with the Bosch PSB 530 RE drill machine?

The Bosch PSB 530 RE drill machine does not require a specific type of plug for socket outlets. It is designed to be compatible with standard household plugs commonly used in your region. When using the drill machine, ensure that the plug is inserted securely into a properly grounded socket outlet. If you are unsure about the type of plug or socket outlet in your region, consult a qualified electrician or refer to local electrical regulations for guidance. It is important to prioritize safety and ensure that the plug and socket outlet are compatible to prevent any electrical hazards.

Can the Bosch PSB 530 RE drill machine be used for drilling in materials other than brick, concrete, stone, wood, metal, and plastic?

The Bosch PSB 530 RE drill machine is specifically designed for drilling in materials such as brick, concrete, stone, wood, metal, and plastic. It is not recommended to use this drill machine for drilling in materials other than those mentioned. Using the drill machine on unsuitable materials may result in inefficient drilling, damage to the drill bit, or even damage to the drill machine itself. It is important to always refer to the manual or consult the manufacturer for specific guidelines on the recommended materials for drilling with the Bosch PSB 530 RE drill machine.

Is the manual of the Bosch PSB 530 RE available in English?

Yes, the manual of the Bosch PSB 530 RE is available in English .

Is your question not listed? Ask your question here

No results