View the manual for the Bosch PSB 50 here, for free. This manual comes under the category drill machines and has been rated by 4 people with an average of a 6.8. This manual is available in the following languages: English. Do you have a question about the Bosch PSB 50 or do you need help? Ask your question here

The Bosch PSB 50 is a keyless chuck type drill machine that offers a maximum torque of 7.5 N⋅m. This drill machine operates at a maximum idle speed of 3000 RPM, providing efficient drilling performance. With its reverse function, it allows for easy removal of screws or backing out of drill holes. Equipped with a hammer drilling feature, the Bosch PSB 50 is capable of drilling into concrete with a maximum diameter of 13 mm. It also has the ability to drill into steel up to 10 mm in diameter and wood up to 20 mm in diameter. This versatility makes it suitable for a variety of drilling tasks. The drill machine features a soft grip handle, ensuring a comfortable and secure grip during operation. With an output power of 228 W and an input power of 500 W, it delivers reliable and consistent power for various drilling applications. Weighing in at only 1500 g, the Bosch PSB 50 is lightweight and portable, allowing for easy maneuverability and reduced user fatigue. Powered by an AC power source, it provides consistent and reliable power for extended periods of use. Designed for durability and longevity, this drill machine is constructed with high-quality materials that withstand the rigors of regular drilling. Its robust design ensures it stays reliable under demanding conditions, making it a practical choice for both DIY enthusiasts and professionals alike. In conclusion, the Bosch PSB 50 is a versatile and reliable drill machine that offers impressive drilling capabilities in a lightweight and portable package.
| Brand | Bosch |
| Model | PSB 50 | 0 603 126 005 |
| Product | drill machine |
| EAN | 3165140564076 |
| Language | English |
| Filetype | User manual (PDF) |
| Chuck type | Keyless |
| Reverse | Yes |
| Hammer drilling | Yes |
| Soft grip | Yes |
| Torque (max) | 7.5 N⋅m |
| Idle speed (max) | 3000 RPM |
| Impact rate (high speed) | 48000 bpm |
| Drilling diameter in steel (max) | 10 mm |
| Drilling diameter in concrete (max) | 13 mm |
| Drilling diameter in wood (max) | 20 mm |
| Output power | 228 W |
| Input power | 500 W |
| Power source | AC |
| Weight | 1500 g |
Can't find the answer to your question in the manual? You may find the answer to your question in the FAQs about the Bosch PSB 50 below.
1. Soak the rusty part in vinegar until completely soaked through. 2. Let the vinegar work on the rust for 24 hours. 3. Remove the rust with a wire brush or aluminium foil.
The maximum achievable charge level is expressed with 16V or 20V. The V in this case stands for Volt.
The amount of sound varies a lot per brand and type of drill machine, it is therefore wise to wear hearing protection to be sure.
The Bosch PSB 50 has a weight of 1500 g.
Ensure that the drill is securely connected to a power source and that the power switch is in the "on" position. Check if there is a blown fuse or tripped circuit breaker. Additionally, verify that the power cord is not damaged or frayed.
The drill bit size largely depends on the specific task you are trying to accomplish. Consider the material you will be drilling into and consult a drill bit size chart or guide, based on the diameter of the hole you need to create.
The Bosch PSB 50 has a maximum drilling capacity of 10 millimeters in steel, 20 millimeters in wood, and 15 millimeters in masonry. Ensure you choose the appropriate drill bit and rotating speed for these different materials.
The rotational direction can be easily changed by using the forward/reverse switch located near the trigger. Slide it to the desired position, either left or right, to control the direction of rotation.
Yes, the Bosch PSB 50 is suitable for drilling into concrete and other tough materials. However, it is essential to use the appropriate drill bit designed for masonry tasks. Ensure you use a slow rotational speed and apply steady pressure to avoid overheating or damaging the drill. Remember to always wear safety goggles and take appropriate precautions when drilling into tough materials.
Yes, the Bosch PSB 50 has a keyless chuck. This means that the user can easily change drill bits without needing a key or additional tools.
The maximum torque of the Bosch PSB 50 is 7.5 N⋅m. This indicates that it has a decent amount of power for driving screws and smaller drilling tasks.
Yes, the Bosch PSB 50 has a reverse function. This allows the user to quickly and easily remove screws or back out drill bits.
Yes, the Bosch PSB 50 can be used for hammer drilling. This feature is useful for drilling into harder materials like concrete or masonry.
The maximum drilling diameter in wood for the Bosch PSB 50 is 20 mm. This means it can handle a range of woodworking tasks, including drilling large holes in various types of wood.
Yes, the manual of the Bosch PSB 50 is available in English .
Is your question not listed? Ask your question here
No results
Need help?
Do you have a question about the Bosch and is the answer not in the manual?
Question and answer
Number of questions: 5I think the carbon brushes of my drill machine are worn out. I want to replace them but I can't open the machine. I am afraid to force it. Does anyone have any advice?
This message has been automatically translatedCannot open the chuck to remove the drill bit. How do i fix this problem
How can the bit be removed from the jaws when they are jammed shut
Drill bit is stuck within. Not able to unclamp. Please advise. Thank you.
1 comment
Drill stuck how to pull out
Drill only goes in reverse