View the manual for the Bosch ProSilence GL-45 here, for free. This manual comes under the category vacuum cleaners and has been rated by 5 people with an average of a 9.1. This manual is available in the following languages: English. Do you have a question about the Bosch ProSilence GL-45 or do you need help? Ask your question here




| Brand | Bosch |
| Model | ProSilence GL-45 | BGB45300 |
| Product | vacuum cleaner |
| EAN | 4242002830193 |
| Language | English |
| Filetype | User manual (PDF) |
| Maximum input power | 650 W |
| Annual energy consumption | 28 kWh |
| Power control | Electronic |
| Current | 10 A |
| Type | Cylinder vacuum |
| Dust container type | Dust bag |
| Tube material | - |
| Product color | Blue |
| Tube type | Telescopic |
| Dust capacity | 5 L |
| Cleaning type | Dry |
| Green (Eco) compliant | Yes |
| Vacuum air filtering | - |
| Proper use | Home |
| Cleaning surfaces | Carpet, Hard floor |
| B | |
| C | |
| B | |
| Noise level | 70 dB |
| Operating radius | 10 m |
| Silent mode | Yes |
| Dust container full indicator | Yes |
| Automatic cord rewinder | Yes |
| Cord length | 7 m |
| Park/storage assist | Yes |
| Carrying handle(s) | Yes |
| Cord storage | Yes |
| On/off switch | Yes |
| Width | 260 mm |
| Depth | 300 mm |
| Height | 470 mm |
| Weight | 6600 g |
| Weight (without accessories) | 4900 g |
| Upholstery nozzle included | Yes |
| Vacuum brushes included | Dusting brush |
| Crevice tool | Yes |
Can't find the answer to your question in the manual? You may find the answer to your question in the FAQs about the Bosch ProSilence GL-45 below.
Your Bosch vacuum cleaner losing suction power can be due to the following causes: - The suction power is not set to maximum - The dust container or dust bag is full - The hose, brush or tube is clogged
A clean filter is important to maintain the vacuum cleaner's suction power. Therefore, check the filter regularly. When a filter is clogged, dust absorption decreases and energy consumption increases.
A commonly used method is to put a little washing powder in the dust container or the dust bag.
For allergy sufferers, vacuuming the house at least twice a week is recommended.
The Bosch ProSilence GL-45 has a weight of 6600 g.
The Bosch ProSilence GL-45 has a height of 470 mm.
The Bosch ProSilence GL-45 has a width of 260 mm.
The Bosch ProSilence GL-45 has a depth of 300 mm.
The maximum input power of the Bosch ProSilence GL-45 is 650 W. This high power ensures efficient cleaning performance for the user.
Yes, the Bosch ProSilence GL-45 has an annual energy consumption of 28 kWh, making it a relatively energy-efficient vacuum cleaner compared to comparable products.
The Bosch ProSilence GL-45 has a noise level of 70 dB. This low noise level ensures a quieter cleaning experience, minimizing disturbance for the user and their surroundings.
Yes, the Bosch ProSilence GL-45 has a silent mode. This feature allows the user to further reduce the noise level during operation, providing a quieter cleaning experience, especially in noise-sensitive environments.
The Bosch ProSilence GL-45 has an operating radius of 10 m. This large operating radius allows for more flexibility and convenience when cleaning larger areas without frequently changing power outlets.
To troubleshoot if the Bosch ProSilence GL-45 vacuum cleaner is not picking up dirt effectively, you can follow these steps: 1. Check the dust bag: Ensure that the dust bag is not full or clogged. If the dust bag is full, replace it with a new one. If it is not full, remove the dust bag and check for any blockages. Clear any debris or obstructions that may be preventing proper suction. 2. Inspect the filters: Check the motor protection filter and foam filter for dirt and debris. Clean the filters by tapping them to remove dust or rinse them if necessary. Allow the filters to dry completely before reinserting them into the vacuum cleaner. 3. Examine the floor tool: Inspect the floor tool for any blockages or obstructions. Remove any tangled hair, threads, or debris that may be preventing the floor tool from picking up dirt effectively. 4. Adjust the suction power: Ensure that the suction power is set to the appropriate level for the cleaning task. Increase the suction power for heavily soiled areas and decrease it for delicate surfaces. 5. Check the attachments: If you are using any attachments, such as the crevice nozzle or upholstery nozzle, make sure they are properly connected and not clogged. Clean or unclog the attachments as needed. By following these troubleshooting steps, you should be able to resolve the issue of the vacuum cleaner not picking up dirt effectively.
To troubleshoot if the suction power of the Bosch ProSilence GL-45 vacuum cleaner is too weak, you can follow these steps: 1. Check the dust bag: Ensure that the dust bag is not full or clogged. Replace the dust bag if it is full, or remove and empty it if necessary. 2. Clean or replace the filters: Check the motor protection filter and foam filter for dirt and debris. Clean the filters by tapping them to remove dust, or replace them if they are worn out or damaged. 3. Inspect the hose and attachments: Check the hose and attachments for any blockages or obstructions. Remove any debris or tangled hair that may be blocking the airflow. 4. Adjust the suction power: Make sure that the suction power is set to the appropriate level for the cleaning task. Increase the suction power if needed, but be careful not to set it too high, as it may reduce the effectiveness of the cleaning. 5. Check for leaks: Inspect the hose, connections, and seals for any leaks or loose fittings. Tighten any loose connections or replace any damaged parts. By following these troubleshooting steps, you should be able to improve the suction power of your Bosch ProSilence GL-45 vacuum cleaner.
To fix the issue of the floor tool not gliding smoothly on the floor with the Bosch ProSilence GL-45 vacuum cleaner, you can follow these steps: 1. Check for blockages: Inspect the floor tool for any debris, hair, or obstructions that may be causing it to drag or not glide smoothly. Remove any blockages using your fingers or a small brush. 2. Clean the floor tool: If the floor tool is dirty or clogged, clean it thoroughly. Use a damp cloth or sponge to wipe away any dirt or grime. Pay special attention to the wheels and brush bristles, ensuring they are free from debris. 3. Adjust the height setting: The floor tool may not glide smoothly if it is set at the wrong height for the type of flooring you are cleaning. Adjust the height setting according to the floor type - higher for carpets and lower for hard floors. 4. Lubricate the wheels: If the wheels of the floor tool are not moving smoothly, apply a small amount of lubricant to the axles. This will help the wheels rotate more freely and improve the gliding motion. 5. Replace worn parts: If the floor tool is still not gliding smoothly after cleaning and lubricating, check for any worn or damaged parts. Replace any worn wheels or brush bristles to ensure optimal performance. By following these steps, you should be able to fix the issue of the floor tool not gliding smoothly on the floor with your Bosch ProSilence GL-45 vacuum cleaner.
To ensure proper pickup of pet hair with the Bosch ProSilence GL-45 vacuum cleaner, you can check the following: 1. Check the brush roll: Inspect the brush roll for any tangled hair or debris. Use scissors or a brush to remove any entangled pet hair from the brush roll. 2. Clean or replace the filters: Check the motor protection filter and foam filter for any pet hair buildup. Clean the filters by tapping them to remove hair or replace them if they are clogged or damaged. 3. Adjust the suction power: Increase the suction power to a higher setting to effectively pick up pet hair. Be cautious not to set it too high, as it may damage delicate surfaces. 4. Use the appropriate attachment: Attach the upholstery nozzle or pet hair attachment to the vacuum cleaner. These specialized tools are designed to effectively remove pet hair from furniture, upholstery, and other surfaces. 5. Vacuum in multiple directions: When vacuuming pet hair, try vacuuming in different directions to ensure thorough pickup. This can help dislodge and capture stubborn pet hair. By following these steps, you should be able to improve the pickup of pet hair with your Bosch ProSilence GL-45 vacuum cleaner.
To troubleshoot if the optional accessories are not attaching properly to the Bosch ProSilence GL-45 vacuum cleaner, you can follow these steps: 1. Check compatibility: Ensure that the optional accessories you are trying to attach are compatible with the Bosch ProSilence GL-45 vacuum cleaner. Refer to the product manual or the manufacturer's website to verify compatibility. 2. Align and secure: Align the accessory with the attachment point on the vacuum cleaner. Make sure it is properly aligned and securely attached. Some accessories may require a twisting or locking motion to secure them in place. 3. Clean attachment points: Check the attachment points on the vacuum cleaner for any dirt, debris, or obstructions. Clean the attachment points using a soft cloth or brush to ensure a proper connection. 4. Apply gentle pressure: When attaching the accessory, apply gentle pressure while ensuring it is properly aligned. Avoid using excessive force, as it may damage the accessory or the vacuum cleaner. 5. Contact customer support: If the optional accessories still do not attach properly, contact the customer support of Bosch for further assistance. They can provide guidance or arrange for a replacement if necessary. By following these troubleshooting steps, you should be able to resolve the issue of the optional accessories not attaching properly to your Bosch ProSilence GL-45 vacuum cleaner.
Yes, the manual of the Bosch ProSilence GL-45 is available in English .
Is your question not listed? Ask your question here
No results
Need help?
Do you have a question about the Bosch and is the answer not in the manual?
Question and answer
Number of questions: 0