View the manual for the Bosch PowerTube 400 here, for free. This manual comes under the category batteries and has been rated by 1 people with an average of a 9.1. This manual is available in the following languages: English. Do you have a question about the Bosch PowerTube 400 or do you need help? Ask your question here
The Bosch PowerTube 400 is a rechargeable battery designed for electric bicycles. It has a capacity of 400 watt-hours, providing a decent amount of power for extended rides. The PowerTube 400 is integrated into the frame of the bike, offering a sleek and streamlined look. It is compatible with select Bosch eBike systems and is easy to install and remove for charging. Constructed with high-quality materials, the PowerTube 400 is built to withstand the rigors of everyday use. It is also designed to be weather-resistant, ensuring reliable performance in various conditions. The battery has a long lifespan, providing consistent power output over time. Overall, the Bosch PowerTube 400 is a practical and efficient battery option for electric bike enthusiasts. Its capacity, durability, and integration into the bike frame make it a convenient choice for those looking to extend their riding range.
Can't find the answer to your question in the manual? You may find the answer to your question in the FAQs about the Bosch PowerTube 400 below.
To safely remove the PowerTube 400 battery from your Bosch eBike, follow these steps: 1. Switch off the battery and open the lock using the key. 2. Pull the battery out of the holder. 3. Press on the safety restraint from above to unlock the battery completely. 4. The battery will fall into your hand, allowing you to pull it out of the frame. Note: Different eBike designs may require a different method for inserting and removing the battery. Always refer to the eBike manufacturer's operating instructions for specific guidance. Remember to secure the battery by closing the lock after removal to prevent it from falling out. Always remove the key from the lock to prevent unauthorized access when the eBike is not in use.
If the LEDs on the battery charge indicator of the Bosch PowerTube 400 do not light up when you switch on the battery for the first time, follow these steps: 1. Ensure the battery is not damaged. Contact an authorized bicycle dealer if needed. 2. Charge the battery using the original Bosch eBike charger to ensure full capacity before first use. 3. Check the temperature range for charging (0°C to 40°C) and allow the battery to acclimatize if needed. 4. The five green LEDs on the battery charge indicator represent the battery's state of charge. If none light up, the battery may be damaged. 5. Disconnect the battery from the charger once fully charged. 6. Always switch off the battery and eBike system when inserting or removing the battery from the holder. 7. Test the battery by pressing the on/off button. If no LEDs light up, the battery may be damaged.
Yes, the manual of the Bosch PowerTube 400 is available in English .
Is your question not listed? Ask your question here
No results
Need help?
Do you have a question about the Bosch and is the answer not in the manual?
Question and answer
Number of questions: 1CAN i CHARGE THE BATTERY ON THE BIKE