View the manual for the Bosch PKS 55 A here, for free. This manual comes under the category saws and has been rated by 7 people with an average of a 9.2. This manual is available in the following languages: English. Do you have a question about the Bosch PKS 55 A or do you need help? Ask your question here

The Bosch PKS 55 A is a power saw designed for cutting various materials with precision and efficiency. With an input power of 1200 W, it delivers sufficient power to tackle tough cutting tasks. The saw operates at a maximum idle speed of 5600 RPM, allowing for quick and clean cuts. Equipped with a 160 mm blade diameter, the saw offers a cutting depth of 55 mm at a 90º angle, making it suitable for a wide range of cutting applications. At a 45º angle, it provides a cutting depth of 38 mm. The position indicator feature ensures accurate and consistent cutting results. Weighing 3900 g, this saw is designed with portability in mind. Its double-insulated construction ensures safe operation. The AC input voltage of 240 V makes it compatible with most standard power outlets. The Bosch PKS 55 A features a 20 mm blade bore, allowing for easy blade installation and replacement. In terms of vibration, it emits 2.5 m/s², with an uncertainty of 1.5 m/s². The noise level of the saw is measured at 92 dB, providing a relatively quiet operation. The sound power level is 103 dB, with a sound level uncertainty of 3 dB. Overall, the Bosch PKS 55 A is a versatile and reliable power saw suitable for both professional and DIY use. With its powerful motor, precise cutting capabilities, and convenient design features, it offers a reliable and efficient cutting experience.
| Brand | Bosch |
| Model | PKS 55 A | 0 603 501 000 |
| Product | saw |
| EAN | 3165140477789, 3165140579322 |
| Language | English |
| Filetype | User manual (PDF) |
| Input power | 1200 W |
| AC input voltage | 240 V |
| Power source | AC |
| Idle speed (max) | 5600 RPM |
| Blade diameter | 160 mm |
| Cutting depth (90º) | 55 mm |
| Cutting depth (45º) | 38 mm |
| Blade bore | 20 mm |
| Sound power level | 103 dB |
| Sound level uncertainty | 3 dB |
| Sound pressure level | 92 dB |
| Position indicator | Yes |
| Noise level | 92 dB |
| Vibration emission | 2.5 m/s² |
| Uncertainty K | 1.5 m/s² |
| Double insulated | Yes |
| Weight | 3900 g |
Can't find the answer to your question in the manual? You may find the answer to your question in the FAQs about the Bosch PKS 55 A below.
The Bosch PKS 55 A has a weight of 3900 g.
1. Wipe sawdust from the saw blade with a brush. 2. Spray the saw blade with oven cleaner and leave for 30 minutes. 3. Remove the oven cleaner and dirt with a dry cloth. 4. Grease saw blade with Vaseline.
If there is resin or other debris on the blade, it may look like the blade is blunt. If the saw blade has been thoroughly cleaned and is still blunt, it is recommended to have the saw blade sharpened.
1. Soak the rusty part in vinegar until completely soaked through. 2. Let the vinegar work on the rust for 24 hours. 3. Remove the rust with a wire brush or aluminium foil.
The maximum achievable charge level is expressed with 16V or 20V. The V in this case stands for Volt.
The amount of sound varies a lot per brand and type of saw, it is therefore wise to wear hearing protection to be sure.
Adjust the cutting depth by loosening the depth adjustment lever, setting the desired depth, and then tightening the lever. Make sure it is securely locked in place before starting your cut.
Prior to changing the blade, always disconnect the power supply. Then, use the spindle lock button to lock the blade and use the wrench supplied with the saw to loosen and remove the blade. Ensure you handle the blade carefully to avoid injury.
To achieve precise cuts, it is essential to align the cutting line with the saw's guide markings. Maintain a firm grip on the saw and follow a steady, continuous motion throughout the cut, keeping the blade aligned with the guide markings.
Safety is crucial, so make sure to wear protective goggles to safeguard your eyes from debris. Additionally, use ear protection to reduce noise exposure. Always secure the material you are cutting in a stable position and do not start the saw with the blade in contact with the material.
For cutting wood, use a suitable saw blade with a high tooth count to ensure clean and accurate cuts. When cutting other materials, such as laminated panels or plastics, choose a blade specifically designed for those materials to prevent damage and achieve optimal results.
Yes, the Bosch PKS 55 A has a power input of 1200 W, which is quite high. This means the saw has a strong and powerful motor, making it suitable for various cutting tasks.
Yes, the Bosch PKS 55 A has an idle speed of 5600 RPM, which is quite high. This means the saw can quickly and efficiently cut through different materials.
No, the Bosch PKS 55 A has a blade diameter of 160 mm, which is relatively small. This means the saw is more suitable for smaller cutting tasks or precision work.
Yes, the Bosch PKS 55 A has a position indicator. This feature allows the user to accurately set and adjust the cutting depth, ensuring precise and consistent cuts.
Yes, the Bosch PKS 55 A has a noise level of 92 dB, which is relatively high. This means the saw can produce loud noise during operation, so it is recommended to use hearing protection while using the tool.
Yes, the manual of the Bosch PKS 55 A is available in English .
Is your question not listed? Ask your question here
No results
Need help?
Do you have a question about the Bosch and is the answer not in the manual?
Question and answer
Number of questions: 0