View the manual for the Bosch PIE875T01E here, for free. This manual comes under the category stoves and has been rated by 1 people with an average of a 7.4. This manual is available in the following languages: English. Do you have a question about the Bosch PIE875T01E or do you need help? Ask your question here

The Bosch PIE875T01E stove features 5 zone(s) for cooking, with a zone induction hob type. The control type is touch, providing ease of use. With a power of 7290 W, this stove is designed for efficient cooking. The stove has a width of 780 millimeters, a depth of 500 millimeters, and a height of 57.7 millimeters. For safety, it comes equipped with a child lock feature. The cord length is 1.5 meters, allowing for flexibility in placement. The Bosch PIE875T01E stove offers a modern design and functionality suitable for various cooking needs. The touch controls make operation simple and intuitive. The 5 cooking zones provide ample space for multiple pots and pans to be used simultaneously. The induction hob technology ensures quick and even heating, making the cooking process efficient. The child lock feature adds a layer of safety, especially in households with young children. The sleek design of the stove makes it a stylish addition to any kitchen. With its reliable performance and array of features, the Bosch PIE875T01E stove is a practical choice for those looking for a versatile cooking appliance.
| Brand | Bosch |
| Model | PIE875T01E | PIE875T01E |
| Product | stove |
| EAN | 4242002324098 |
| Language | English |
| Filetype | User manual (PDF) |
| Number of cooking zones | 5 zone(s) |
| Appliance placement | Built-in |
| Hob type | Zone induction hob |
| Product color | Black |
| Control type | Touch |
| Child lock | Yes |
| Power | 7290 W |
| Width | 780 mm |
| Depth | 500 mm |
| Height | 57.7 mm |
| Cord length | 1.5 m |
Can't find the answer to your question in the manual? You may find the answer to your question in the FAQs about the Bosch PIE875T01E below.
Nowadays almost all pans are suitable for induction. You can easily test whether your old pans can also be used on induction by holding a magnet against the bottom of the pan. If the magnet stays on the pan, your old pan is suitable for induction.
Most induction hobs can be reset by disconnecting the hob from power by unplugging it from the power outlet. You will then have to wait at least 60 minutes.
A Perilex connection is a special connection that can handle more power than a normal connection. This connection has five holes instead of two and is often used for induction hobs.
No, cooking on induction is not dangerous.
The Bosch PIE875T01E has a height of 57.7 mm.
The Bosch PIE875T01E has a width of 780 mm.
The Bosch PIE875T01E has a depth of 500 mm.
Yes, the Bosch PIE875T01E has a child lock. This feature allows the user to safely use the stove without worrying about unintentional setting changes or accidents caused by children.
The Bosch PIE875T01E has 5 cooking zones. This provides the user with ample space to cook multiple dishes simultaneously.
The Bosch PIE875T01E has a zone induction hob. Induction hobs are known for their fast heating, energy efficiency, and precise temperature control.
The power of the Bosch PIE875T01E is 7290 W. This high power rating allows for quick heating and efficient cooking.
Yes, the Bosch PIE875T01E has touch control. This type of control offers a modern and intuitive user interface, making it easy to adjust settings and operate the stove.
To adjust the temperature settings for each cooking zone on the Bosch PIE875T01E stove, follow these steps: 1. Identify the cooking zone: Look for the control panel on the stove. Each cooking zone will have a corresponding set of controls. 2. Select the cooking zone: Press the button or touch the control panel area that corresponds to the cooking zone you want to adjust. 3. Adjust the temperature: Once you have selected the cooking zone, use the temperature control buttons or sliders to increase or decrease the temperature. The specific controls may vary depending on the model, but they are typically labeled with plus (+) and minus (-) symbols or have a numerical display. 4. Fine-tune the temperature: If you need to fine-tune the temperature further, use the additional temperature adjustment options available. These options may include features like power boost, simmer, or keep warm settings. 5. Monitor the temperature: As you adjust the temperature, keep an eye on the cooking zone's display or indicator lights to ensure that the desired temperature is set. Remember to refer to the Bosch PIE875T01E stove's manual for detailed instructions and any specific features or settings that may be unique to your model.
If the Bosch PIE875T01E stove does not turn on or there is no power supply, follow these steps: 1. Check the power supply: Ensure that the stove is properly connected to a functioning power outlet. Verify that the power cord is securely plugged in and that there is power supply to the outlet. 2. Reset the circuit breaker: If there is no power supply to the stove, check the circuit breaker in your home's electrical panel. Locate the breaker that controls the stove and reset it by turning it off and then back on. 3. Check for a blown fuse: If the stove is connected to a fuse box, check if any of the fuses have blown. Replace any blown fuses with new ones of the same rating. 4. Test other appliances: Verify if other appliances or devices connected to the same power outlet are working. If they are also not functioning, there may be an issue with the power supply in your home. 5. Contact a qualified technician: If the stove still does not turn on or there is no power supply after following these steps, it is recommended to contact a qualified technician or the Bosch customer support for further assistance. Please note that these troubleshooting steps are general guidelines and may vary depending on the specific model of the Bosch PIE875T01E stove.
To clean the control panel of the Bosch PIE875T01E stove, follow these steps: 1. Ensure safety: Before cleaning the control panel, make sure the stove is turned off and cool to the touch to avoid any accidents. 2. Prepare cleaning solution: Mix a mild detergent or dish soap with warm water in a bowl or bucket. Avoid using abrasive cleaners or harsh chemicals that can damage the control panel. 3. Dampen a soft cloth: Dip a soft cloth or sponge into the cleaning solution and wring out any excess liquid. The cloth should be damp, not dripping wet. 4. Wipe the control panel: Gently wipe the control panel with the damp cloth, paying attention to any stains or spills. Avoid getting water or cleaning solution into any openings or buttons. 5. Dry the control panel: After cleaning, use a dry, lint-free cloth to wipe away any remaining moisture from the control panel. Ensure that the control panel is completely dry before turning on the stove. Remember to refer to the Bosch PIE875T01E stove's manual for any specific cleaning instructions or recommendations.
To remove difficult stains or spills from the surface of the Bosch PIE875T01E stove, follow these steps: 1. Identify the type of stain: Determine the nature of the stain or spill on the stove's surface. This will help you choose the appropriate cleaning method. 2. Prepare a cleaning solution: Depending on the type of stain, you can use a mild detergent, vinegar, or a specialized stove cleaner. Follow the instructions on the cleaning product for the correct dilution ratio. 3. Apply the cleaning solution: Dampen a soft cloth or sponge with the cleaning solution. Gently rub the stained area in a circular motion, applying light pressure. Avoid scrubbing too hard to prevent damage to the stove's surface. 4. Let the solution sit: Allow the cleaning solution to sit on the stain for a few minutes. This will help loosen the stain and make it easier to remove. 5. Wipe clean: After the solution has had time to work, use a clean cloth or sponge to wipe away the stain. Rinse the cloth or sponge frequently to prevent spreading the stain. 6. Dry the surface: Once the stain is removed, use a dry cloth to wipe the surface of the stove and ensure it is completely dry. If the stain persists or if you are unsure about the appropriate cleaning method, refer to the Bosch PIE875T01E stove's manual for specific instructions or contact Bosch customer support for further assistance.
To troubleshoot if one of the cooking zones is not heating up properly on the Bosch PIE875T01E stove, follow these steps: 1. Check the power supply: Ensure that the stove is properly connected to a functioning power outlet. Verify that the power cord is securely plugged in and that there is power supply to the stove. 2. Inspect the cooking zone: Examine the cooking zone that is not heating up properly. Look for any visible signs of damage, such as cracks or discoloration. 3. Clean the cooking zone: If there are any spills or debris on the cooking zone, clean it thoroughly. Use a soft cloth or sponge with warm soapy water to remove any residue. Ensure that the cooking zone is completely dry before using it again. 4. Check the control settings: Make sure that the temperature settings for the cooking zone are properly adjusted. Ensure that the correct power level is selected and that any additional features, such as power boost or timer, are not activated. 5. Contact customer support: If the cooking zone still does not heat up properly after following these steps, it is recommended to contact Bosch customer support for further assistance. They will be able to provide specific troubleshooting steps or arrange for a technician to inspect and repair the stove if necessary. Please note that these troubleshooting steps are general guidelines and may vary depending on the specific issue with the cooking zone.
To troubleshoot if the cooking zones on the Bosch PIE875T01E stove are not heating up, you can follow these steps: 1. Check the power supply: Ensure that the stove is properly connected to a power source and that the circuit breaker or fuse is not tripped. If there is a power issue, resolve it before proceeding. 2. Verify the cooking zone settings: Make sure that the cooking zones are set to the desired temperature and cooking mode. Adjust the settings if necessary. 3. Check for any error codes: The stove may display error codes if there is a malfunction. Refer to the manual for a list of error codes and their corresponding troubleshooting steps. 4. Clean the cooking zones: If the cooking zones are dirty or have residue on them, they may not heat up properly. Clean the cooking zones using a non-abrasive cleaner and a soft cloth. 5. Contact customer support: If the above steps do not resolve the issue, it is recommended to contact Bosch customer support for further assistance. They can provide specific troubleshooting steps or arrange for a technician to inspect the stove. Please note that these steps are general troubleshooting guidelines and may vary depending on the specific issue. It is always recommended to refer to the manual or contact customer support for accurate and detailed troubleshooting instructions.
If the control panel of the Bosch PIE875T01E stove is not responding, you can try the following steps to troubleshoot the issue: 1. Check the power supply: Ensure that the stove is properly connected to a power source and that there is no power outage. If there is a power issue, resolve it before proceeding. 2. Reset the control panel: Locate the power switch or circuit breaker for the stove and turn it off. Wait for a few minutes, then turn it back on. This can help reset the control panel and resolve any temporary issues. 3. Check for error codes: If the control panel displays any error codes, refer to the manual for a list of error codes and their corresponding troubleshooting steps. Follow the recommended actions to resolve the issue. 4. Clean the control panel: If the control panel is dirty or has residue on it, it may affect its responsiveness. Use a soft, damp cloth to clean the control panel gently. Avoid using abrasive cleaners or excessive moisture. 5. Contact customer support: If the above steps do not resolve the issue, it is recommended to contact Bosch customer support for further assistance. They can provide specific troubleshooting steps or arrange for a technician to inspect the stove. Please note that these steps are general troubleshooting guidelines and may vary depending on the specific issue. It is always recommended to refer to the manual or contact customer support for accurate and detailed troubleshooting instructions.
To troubleshoot if the glass ceramic surface of the Bosch PIE875T01E stove is not heating evenly, you can follow these steps: 1. Clean the glass ceramic surface: Ensure that the surface is clean and free from any food residue, spills, or debris. Use a non-abrasive cleaner specifically designed for glass ceramic surfaces and a soft cloth to clean the surface. 2. Check for cookware compatibility: Ensure that you are using cookware with a flat and smooth bottom that is suitable for glass ceramic surfaces. Cookware with uneven or warped bottoms can cause uneven heating. Avoid using cookware with rough or damaged bottoms that can scratch the surface. 3. Adjust the cookware placement: Make sure that the cookware is centered properly on the cooking zone. Ensure that the bottom of the cookware is in direct contact with the glass ceramic surface for optimal heat transfer. 4. Use the correct cooking zone size: Select the appropriate cooking zone size that matches the size of your cookware. Using a smaller cooking zone for larger cookware can result in uneven heating. 5. Contact customer support: If the above steps do not resolve the issue, it is recommended to contact Bosch customer support for further assistance. They can provide specific troubleshooting steps or arrange for a technician to inspect the stove. Please note that these steps are general troubleshooting guidelines and may vary depending on the specific issue. It is always recommended to refer to the manual or contact customer support for accurate and detailed troubleshooting instructions.
To troubleshoot if the ventilation system of the Bosch PIE875T01E stove is not working properly, you can follow these steps: 1. Check for obstructions: Ensure that there are no obstructions blocking the ventilation system, such as food debris, grease buildup, or objects placed near the vents. Clear any obstructions to allow proper airflow. 2. Clean the filters: The ventilation system may have filters that need regular cleaning. Refer to the manual for the specific location and instructions on how to clean the filters. Clean the filters as recommended to maintain optimal performance. 3. Verify the fan operation: Check if the fan is operating when the ventilation system is turned on. If the fan is not running, there may be an issue with the fan motor or the control settings. Contact customer support for further assistance or to schedule a service appointment. 4. Ensure proper installation: Make sure that the ventilation system is installed correctly according to the manufacturer's instructions. Improper installation can affect the performance of the system. If you suspect installation issues, contact a professional installer or customer support for guidance. 5. Contact customer support: If the above steps do not resolve the issue, it is recommended to contact Bosch customer support for further assistance. They can provide specific troubleshooting steps or arrange for a technician to inspect the ventilation system. Please note that these steps are general troubleshooting guidelines and may vary depending on the specific issue. It is always recommended to refer to the manual or contact customer support for accurate and detailed troubleshooting instructions.
To troubleshoot if the Bosch PIE875T01E stove is consuming more energy than usual, you can follow these steps: 1. Check the cooking settings: Ensure that you are using the appropriate cooking settings for your needs. Using higher heat levels or longer cooking times than necessary can result in increased energy consumption. Adjust the settings accordingly. 2. Verify cookware compatibility: Make sure that you are using cookware that is suitable for the stove's cooking zones. Cookware with a flat and smooth bottom that matches the size of the cooking zone will ensure efficient heat transfer and reduce energy waste. 3. Clean the cooking zones: A dirty or greasy cooking zone can affect heat distribution and increase energy consumption. Clean the cooking zones regularly using a non-abrasive cleaner to remove any residue or buildup. 4. Utilize residual heat: Take advantage of the residual heat from the cooking zones. When nearing the end of the cooking process, you can turn off the cooking zone a few minutes before the food is fully cooked. The residual heat will continue to cook the food while saving energy. 5. Contact customer support: If the above steps do not resolve the issue, it is recommended to contact Bosch customer support for further assistance. They can provide specific troubleshooting steps or arrange for a technician to inspect the stove for any potential issues. Please note that these steps are general troubleshooting guidelines and may vary depending on the specific issue. It is always recommended to refer to the manual or contact customer support for accurate and detailed troubleshooting instructions.
Yes, the manual of the Bosch PIE875T01E is available in English .
Is your question not listed? Ask your question here
No results
Need help?
Do you have a question about the Bosch and is the answer not in the manual?
Question and answer
Number of questions: 1Can l buy a new hot plate part for this cooktop