View the manual for the Bosch PEX 400 AE here, for free. This manual comes under the category sanders and has been rated by 5 people with an average of a 7.5. This manual is available in the following languages: English. Do you have a question about the Bosch PEX 400 AE or do you need help? Ask your question here

| Brand | Bosch |
| Model | PEX 400 AE | 0 603 310 67A |
| Product | sanders |
| EAN | 3165140274784, 3165140594431, 3165140594448, 3610170556091 |
| Language | English |
| Filetype | User manual (PDF) |
| Weight | 1900 g |
| Sanding plate size (WxD) | 125 x 125 mm |
| Sanding disc diameter | 125 mm |
| Type of sander | - |
| Soft grip | Yes |
| Input power | 400 W |
| Power source | AC |
| 9000 - 26000 |
| Idle oscillation rate (min) | 9000 OPM |
| Idle oscillation rate (max) | 26000 OPM |
| Oscillating orbit diameter | 5 mm |
| Eccentricity | 2.5 mm |
Can't find the answer to your question in the manual? You may find the answer to your question in the FAQs about the Bosch PEX 400 AE below.
The maximum achievable charge level is expressed with 16V or 20V. The V in this case stands for Volt.
The Bosch PEX 400 AE has a weight of 1900 g.
To assemble the sanding pad, insert it onto the shaft and tighten it using the wrench provided. To disassemble, use the wrench to loosen the pad and remove it from the shaft.
You can adjust the sanding speed by using the speed control wheel located on the front of the sander. Turning it to the right increases the speed, while turning it to the left decreases the speed.
It is recommended to use sandpaper with a velcro backing to ensure easy and secure attachment to the sanding pad. Make sure to choose the appropriate grit according to your sanding needs.
Connect the dust extraction system to the designated port located at the rear of the sander. Make sure it is properly secured for effective dust collection during sanding.
Regularly clean the sanding pad, sandpaper, and dust extraction system to prevent clogging and maintain optimal performance. Also, check the carbon brushes periodically and replace them if worn out. Additionally, store the sander in a clean and dry place away from moisture.
Yes, the Bosch PEX 400 AE has a soft grip. This means that the user will have a more comfortable and secure grip while operating the sander.
The sanding plate size of the Bosch PEX 400 AE is 125 x 125 mm. This size provides a decent working area for sanding tasks.
The Bosch PEX 400 AE has an idle oscillation rate ranging from 9000 to 26000 OPM. This means the user can adjust the speed according to their sanding requirements, providing versatility in different applications.
The Bosch PEX 400 AE has a sanding disc diameter of 125 mm. This size is common for sanding tasks and allows for efficient material removal.
The Bosch PEX 400 AE has an eccentricity of 2.5 mm. This eccentricity provides a significant oscillating orbit diameter, allowing for more aggressive sanding action.
Yes, the manual of the Bosch PEX 400 AE is available in English .
Is your question not listed? Ask your question here
No results
Need help?
Do you have a question about the Bosch and is the answer not in the manual?
Question and answer
Number of questions: 1Hello, I own a Bosch PEX 125 AE first generation, model year approximately 1985-87. Suddenly, it fails me with an electrical issue regarding a loose connection on the on/off button. What could it be? Are there carbon brushes or a push button that needs to be replaced? I definitely want it to last a bit longer. Regards, Jorma.
This message has been automatically translated