Bosch PCM 8 SD manual

Bosch PCM 8 SD
8 · 1
PDF manual
 · 305 pages
English
manualBosch PCM 8 SD
Robert Bosch Power Tools GmbH
70538 Stuttgart
GERMANY
www.bosch-pt.com
1 609 92A 3VU (2017.07) PS / 306
PCM

8 SD | 800 SD

de Originalbetriebsanleitung
en Original instructions
fr Notice originale
es Manual original
pt Manual original
it Istruzioni originali
nl Oorspronkelijke
gebruiksaanwijzing
da Original brugsanvisning
sv Bruksanvisning i original
no Original driftsinstruks
fi Alkuperäiset ohjeet
el Πρωτότυπο οδηγιών χρήσης
tr Orijinal işletme talimatı
pl Instrukcja oryginalna
cs Původní návod k používání
sk Pôvodný návod na použitie
hu Eredeti használati utasítás
ru Оригинальное руководство по
эксплуатации
uk Оригінальна інструкція з
експлуатації
kk Пайдалану нұсқаулығының
түпнұсқасы
ro Instrucţiuni originale
bg Оригинална инструкция
mk Оригинално упатство за работа
sr Originalno uputstvo za rad
sl Izvirna navodila
hr Originalne upute za rad
et Algupärane kasutusjuhend
lv Instrukcijas oriģinālvalodā
lt Originali instrukcija
ar
ςТЎϩХʉ ЌТϾϦφЍʉ ʌμВТЎϺυ
OBJ_BUCH-2765-002.book Page 1 Tuesday, July 25, 2017 2:28 PM

View the manual for the Bosch PCM 8 SD here, for free. This manual comes under the category saws and has been rated by 1 people with an average of a 8. This manual is available in the following languages: English. Do you have a question about the Bosch PCM 8 SD or do you need help? Ask your question here

Need help?

Do you have a question about the Bosch and is the answer not in the manual?

  • Receive updates on solutions
  • Get answers to your question

Question and answer

Number of questions: 1
M
MickAugust 4, 2023

The blade guard does not retract all the way

The blade guard does not retract all the way
zoom-in
View photo

The Bosch PCM 8 SD is a powerful and versatile saw designed for precision cutting. With an input power of 1200 W, it offers a high level of performance for various cutting tasks. The blade diameter of 216 mm allows for accurate and efficient cuts, while the idle speed of 4800 RPM ensures smooth operation. The cutting capacity of the Bosch PCM 8 SD is impressive. At 0°, it can cut through materials with dimensions of 70 x 305 millimeters, providing ample room for a range of cutting applications. At a 45° mitre angle, the cutting capacity is slightly reduced to 70 x 215 millimeters. Weighing 15500 grams, this saw is not the lightest in its category, but it compensates for its weight with advanced features. The inclusion of a dust bag ensures a cleaner working environment, while the spindle lock allows for easy and secure blade changes. Additionally, the saw features a dust extraction system, further enhancing its functionality. The Bosch PCM 8 SD operates on AC power, making it suitable for use in various settings. Its blade bore measures 30 millimeters, accommodating a wide range of compatible blades. Overall, the Bosch PCM 8 SD is a reliable and efficient saw that offers precise and accurate cutting capabilities. With its robust construction and included features, this saw is built to deliver durability and performance over time.

General
BrandBosch
ModelPCM 8 SD | 0 603 B11 030
Productsaw
EAN3165140829441
LanguageEnglish
FiletypeUser manual (PDF)
Power
Input power1200 W
Power sourceAC
Packaging content
Blade diameter216 mm
Dust bag includedYes
Blade bore30 mm
Performance
Idle speed (max)4800 RPM
Other features
Cutting capacity 0°70 x 305 mm
Cutting capacity 45° miter70 x 215 mm
Weight & dimensions
Weight15500 g
Features
Spindle lockYes
Dust extractionYes
show more

Can't find the answer to your question in the manual? You may find the answer to your question in the FAQs about the Bosch PCM 8 SD below.

What is the weight of the Bosch PCM 8 SD?

The Bosch PCM 8 SD has a weight of 15500 g.

What is the best way to clean my saw blade?

1. Wipe sawdust from the saw blade with a brush. 2. Spray the saw blade with oven cleaner and leave for 30 minutes. 3. Remove the oven cleaner and dirt with a dry cloth. 4. Grease saw blade with Vaseline.

My saw blade is blunt. What now?

If there is resin or other debris on the blade, it may look like the blade is blunt. If the saw blade has been thoroughly cleaned and is still blunt, it is recommended to have the saw blade sharpened.

How do I remove rust from my Bosch saw?

1. Soak the rusty part in vinegar until completely soaked through. 2. Let the vinegar work on the rust for 24 hours. 3. Remove the rust with a wire brush or aluminium foil.

What does '16V' or '20V' mean?

The maximum achievable charge level is expressed with 16V or 20V. The V in this case stands for Volt.

Do I have to wear hearing protection when using a saw?

The amount of sound varies a lot per brand and type of saw, it is therefore wise to wear hearing protection to be sure.

How do I change the blade on my Bosch PCM 8 SD saw?

To change the blade on your Bosch PCM 8 SD saw, first unplug the saw from the power source. Then, locate and loosen the arbor nut using the provided wrench. Remove the old blade and replace it with a new one, making sure the teeth are facing in the correct direction. Finally, tighten the arbor nut securely before using the saw again.

How can I adjust the cutting depth of my Bosch PCM 8 SD saw?

To adjust the cutting depth on your Bosch PCM 8 SD saw, first determine the desired depth of cut. Then, locate the cutting depth adjustment knob or lever (usually positioned near the blade guard). Turn the knob or move the lever to set the desired cutting depth. Ensure the adjustment is securely locked in place before operating the saw.

What safety precautions should I take when using the Bosch PCM 8 SD saw?

When using the Bosch PCM 8 SD saw, it is important to prioritize safety. Make sure to wear appropriate personal protective equipment such as safety glasses, ear protection, and gloves. Always ensure the workpiece is properly secured before cutting. Keep your hands away from the blade path, and avoid wearing loose clothing or jewelry that could become entangled with the saw. Additionally, familiarize yourself with the saw's safety features and always follow the manufacturer's guidelines.

How do I make accurate miter cuts with the Bosch PCM 8 SD saw?

To make accurate miter cuts with your Bosch PCM 8 SD saw, first determine the desired angle for the cut. Unlock the miter gauge on the saw and adjust it to the desired angle. Ensure the gauge is securely locked in place. Align your workpiece against the fence and hold it firmly. Turn on the saw and carefully guide the workpiece through the blade while maintaining a steady and controlled motion.

Can I use my Bosch PCM 8 SD saw to cut different materials?

Yes, the Bosch PCM 8 SD saw is versatile and can be used to cut various materials such as wood, plastic, and certain types of non-ferrous metals. However, it is crucial to ensure that you are using the appropriate blade for each material. Refer to the manufacturer's guidelines or consult with a professional to select the correct blade type and tooth configuration for the specific material you intend to cut.

Does the Bosch PCM 8 SD have a 1200 Watt input power?

Yes. This means that the saw has a high power output, making it suitable for cutting through various materials with ease.

What is the blade diameter of the Bosch PCM 8 SD?

The blade diameter is 216 mm. This size is ideal for making precise and accurate cuts.

Does the Bosch PCM 8 SD have a spindle lock?

Yes. The presence of a spindle lock allows for easy and quick changing of the saw blade, providing convenience and efficiency for the user.

Can the Bosch PCM 8 SD be used with a dust extraction system?

Yes. This feature helps to keep the work area clean and reduces the amount of dust produced during cutting, making it more comfortable and safer for the user.

What is the cutting capacity of the Bosch PCM 8 SD at 45° mitre?

The cutting capacity at 45° mitre is 70 x 215 mm. This gives users the ability to make angled cuts on larger materials with ease and precision.

Is the manual of the Bosch PCM 8 SD available in English?

Yes, the manual of the Bosch PCM 8 SD is available in English .

Is your question not listed? Ask your question here

No results