View the manual for the Bosch PBH 3000 FRE here, for free. This manual comes under the category drill machines and has been rated by 2 people with an average of a 7.7. This manual is available in the following languages: English. Do you have a question about the Bosch PBH 3000 FRE or do you need help? Ask your question here




The Bosch PBH 3000 FRE drill machine weighs 3000 grams and features an impact rate of 4000 bpm. With a maximum drilling diameter of 26 millimeters in concrete, 13 millimeters in steel, and 30 millimeters in wood, this drill machine is versatile for various applications. The chuck type is keyless, allowing for easy bit changes without the need for additional tools. Powered by AC, this drill machine is suitable for use in both professional and DIY settings. The ergonomic slimline design of the Bosch PBH 3000 FRE drill machine includes a soft grip for comfortable and fatigue-free operation. Additionally, it is equipped with an integrated chisel function with Vario-Lock, allowing for a freely selectable work position of the chisel. The Bosch SDS-plus tool holder enables fast and tool-free bit changes, ensuring optimum power transfer during operation. The drill machine also features an impact stop for drilling in metal and wood, increasing its versatility. With Bosch Electronic speed control, users can adjust the speed using the trigger switch and setting wheel, making it suitable for material-specific tasks.
| Brand | Bosch |
| Model | PBH 3000 FRE | 0 603 393 220 |
| Product | drill machine |
| EAN | 3165140430265, 3165140460002 |
| Language | English |
| Filetype | User manual (PDF) |
| Weight | 3000 g |
| Impact rate | 4000 bpm |
| Drilling diameter in concrete (max) | 26 mm |
| Drilling diameter in steel (max) | 13 mm |
| Drilling diameter in wood (max) | 30 mm |
| Chuck type | Keyless |
| Power source | AC |
Can't find the answer to your question in the manual? You may find the answer to your question in the FAQs about the Bosch PBH 3000 FRE below.
1. Soak the rusty part in vinegar until completely soaked through. 2. Let the vinegar work on the rust for 24 hours. 3. Remove the rust with a wire brush or aluminium foil.
The maximum achievable charge level is expressed with 16V or 20V. The V in this case stands for Volt.
The amount of sound varies a lot per brand and type of drill machine, it is therefore wise to wear hearing protection to be sure.
The Bosch PBH 3000 FRE has a weight of 3000 g.
The impact rate of Bosch PBH 3000 FRE is 4000 beats per minute, which means it is suitable for fast and efficient drilling in tough materials like concrete.
The max drilling diameter in concrete for Bosch PBH 3000 FRE is 26 mm, which is a decent size for most common household drilling tasks.
The chuck type of Bosch PBH 3000 FRE is keyless, which makes it convenient and easy to change drill bits without the need for a key.
The power source of Bosch PBH 3000 FRE is AC, ensuring consistent power supply for uninterrupted drilling tasks.
The max drilling diameter in wood for Bosch PBH 3000 FRE is 30 mm, which is on par with or even better than many comparable drill machines, making it a versatile tool for various woodworking projects.
To ensure your safety while using the Bosch PBH 3000 FRE drill machine, follow these steps: 1. Maintain the power tool: Regularly check for any misalignment, binding of moving parts, or breakage of parts that may affect the operation of the tool. If any damage is found, have the power tool repaired before use. 2. Keep cutting tools sharp and clean: Properly maintain cutting tools with sharp cutting edges to prevent binding and ensure better control. 3. Use the power tool as instructed: Follow the instructions provided in the manual and use the power tool, accessories, and tool bits according to the recommended guidelines. Using the power tool for operations other than those intended can be hazardous. 4. Wear appropriate protective gear: Use hearing protection to prevent hearing loss due to exposure to noise. Always use the auxiliary handle supplied with the machine to maintain control and prevent personal injury. 5. Check for hidden utility lines: Before starting work, use suitable detectors or contact the local utility company to determine if there are any hidden utility lines in the work area. Contact with electric lines can lead to fire and electric shock, while damaging a gas line can cause an explosion. 6. Secure your stance and workpiece: Always hold the machine firmly with both hands and maintain a secure stance. Use clamping devices or a vice to secure the workpiece for better control and safety. 7. Take precautions for hazardous materials: Avoid working with materials containing asbestos, as they are considered carcinogenic. When working with materials that produce harmful dust, wear a dust mask and use dust/chip extraction if available. 8. Wait for the machine to stop before placing it down: Always wait until the machine has come to a complete stop before placing it down. This prevents the tool insert from jamming and maintains control over the power tool. 9. Check the cable for damage: Never use the machine with a damaged cable. If the cable is damaged while working, do not touch it and pull the mains plug immediately. Damaged cables increase the risk of electric shock. By following these steps, you can ensure your safety while using the Bosch PBH 3000 FRE drill machine.
To change the drill bit on the Bosch PBH 3000 FRE drill machine, follow these steps: 1. Make sure the power tool is switched off and unplugged for safety. 2. If the dust extraction attachment is mounted, insert the SDS-plus drilling tool into the SDS-plus tool holder until it stops. 3. Loosen the wing bolt on the dust extraction attachment and firmly apply the tool to the drilling location, ensuring that the SDS-plus drilling tool faces against the surface. 4. Position the guide pipe of the dust extraction attachment in its holding fixture so that the head of the dust extraction attachment faces against the surface to be drilled. 5. Retighten the wing bolt and loosen the clamping screw on the depth stop of the dust extraction attachment. 6. Move the depth stop on the telescopic pipe to adjust the drilling depth according to the required clearance. 7. Tighten the clamping screw in this position. 8. The drill bit is now changed and ready for use. Please note that these instructions are specific to the Bosch PBH 3000 FRE drill machine and may not apply to other models or brands. Always refer to the user manual for detailed instructions and safety guidelines.
To adjust the drilling depth on the Bosch PBH 3000 FRE drill machine, follow these steps: 1. Make sure the dust extraction attachment is mounted. Insert the SDS-plus drilling tool into the SDS-plus tool holder, ensuring it reaches the stop. This prevents incorrect adjustment of the drilling depth. 2. Loosen the wing bolt on the dust extraction attachment. Without turning on the power tool, firmly place it against the drilling location, ensuring the SDS-plus drilling tool faces the surface. 3. Position the guide pipe of the dust extraction attachment in its holding fixture, with the head of the attachment facing the surface to be drilled. Avoid sliding the guide pipe further than necessary to keep the scale on the telescopic pipe visible. 4. Retighten the wing bolt. Then, loosen the clamping screw on the depth stop of the dust extraction attachment. 5. Adjust the depth stop on the telescopic pipe to match the desired drilling depth. The clearance shown in the figure should correspond to the required depth. 6. Tighten the clamping screw in this position. By following these steps, you can easily adjust the drilling depth on the Bosch PBH 3000 FRE drill machine.
Yes, the manual of the Bosch PBH 3000 FRE is available in English .
Is your question not listed? Ask your question here
No results
Need help?
Do you have a question about the Bosch and is the answer not in the manual?
Question and answer
Number of questions: 0