Bosch PBD 40 manual

Bosch PBD 40
8.1 · 21
PDF manual
 · 247 pages
English
manualBosch PBD 40
Robert Bosch Power Tools GmbH
70538 Stuttgart
GERMANY
www.bosch-pt.com
1 609 92A 4N5 (2020.09) PS / 247
de Originalbetriebsanleitung
en Original instructions
fr Notice originale
es Manual original
pt Manual original
it Istruzioni originali
nl Oorspronkelijke gebruiksaanwijzing
da Original brugsanvisning
sv Bruksanvisning i original
no Original driftsinstruks
fi Alkuperäiset ohjeet
el Πρωτότυπο οδηγιών χρήσης
tr Orijinal işletme talimatı
pl Instrukcja oryginalna
cs Původní návod k používání
sk Pôvodný návod na použitie
hu Eredeti használati utasítás
ru Оригинальное руководство по
эксплуатации
uk Оригінальна інструкція з
експлуатації
kk Пайдалану нұсқаулығының
түпнұсқасы
ro Instrucțiuni originale
bg Оригинална инструкция
mk Оригинално упатство за работа
sr Originalno uputstvo za rad
sl Izvirna navodila
hr Originalne upute za rad
et Algupärane kasutusjuhend
lv Instrukcijas oriģinālvalodā
lt Originali instrukcija
ar   
1 609 92A 4N5

PBD 40

View the manual for the Bosch PBD 40 here, for free. This manual comes under the category drill machines and has been rated by 21 people with an average of a 8.1. This manual is available in the following languages: English. Do you have a question about the Bosch PBD 40 or do you need help? Ask your question here

Need help?

Do you have a question about the Bosch and is the answer not in the manual?

  • Receive updates on solutions
  • Get answers to your question

Question and answer

Number of questions: 8
M
MagnusEkFebruary 21, 2021

Hello! I am experiencing that the motor unit does not go low enough if you have, for example, a countersinking tool. Can you bypass the "lowest setting" so that the tool can reach beyond the base plate, or do you have to build up the table?

This message has been automatically translated
L
Locantore MontageOctober 4, 2016

I own a PBD 40 Bosch. It doesn't turn on anymore? I found a fuse. I don't know if it is from the bench drill press? What should I do? Best regards, Locantore

This message has been automatically translated
R
Reiner schnelleJanuary 9, 2017

How can I release the drill from the chuck on the Bosch PBD 40? Is there a trick to it? Is there a catch to it?

This message has been automatically translated
H
HuschkaOctober 27, 2017

Hello, I tightened a drill too tightly and it won't loosen anymore. How can I remove it from the machine? Thank you! Kind regards, Huschka

This message has been automatically translated
H
Heiri BernerDecember 6, 2014

How do I change the chuck to a different type?

This message has been automatically translated
S
SarhanmFebruary 11, 2016

I want to make holes in wood panels with size about 850x600 mm. The panels should be clamped vertically. The problem that the allowable height between the base and the bit of the Bosch PBD 40 does not allow for much sizes. Is there a way to deal with this problem.

A
antonioApril 3, 2023

What causes the drill to run for 3 seconds and then shut off

O
OlgaMarch 22, 2021

What pbd mean

General
BrandBosch
ModelPBD 40 | 0 603 B07 000
Productdrill machine
EAN3165140569187
LanguageEnglish
FiletypeUser manual (PDF)
Features
Chuck typeKeyless
Adjustable speedYes
Hammer drillingNo
DrillingYes
Screwdriving-
Product design-
Adjustable torqueYes
Built-in lightYes
Performance
Screw diameter (max)90 mm
Drilling diameter in steel (max)13 mm
Drilling diameter in wood (max)40 mm
Number of gears2
Idle speed (1st gear)850 RPM
Idle speed (2nd gear)2500 RPM
Idle speed (max)2500 RPM
Chuck capacity (max)- mm
Drilling diameter in concrete (max)- mm
Drilling diameter in steel (max)13 mm
Drilling diameter in wood (max)40 mm
Chuck capacity (max)- mm
Technical details
TypeDrill
Yes
Weight & dimensions
Weight11200 g
Weight11200 g
Power
Power sourceAC
Input power710 W
AC input voltage230 V
Power710 W
Design
Chuck typeKeyless
show more

Can't find the answer to your question in the manual? You may find the answer to your question in the FAQs about the Bosch PBD 40 below.

How do I remove rust from my Bosch drill machine?

1. Soak the rusty part in vinegar until completely soaked through. 2. Let the vinegar work on the rust for 24 hours. 3. Remove the rust with a wire brush or aluminium foil.

What does '16V' or '20V' mean?

The maximum achievable charge level is expressed with 16V or 20V. The V in this case stands for Volt.

Do I have to wear hearing protection when using a drill machine?

The amount of sound varies a lot per brand and type of drill machine, it is therefore wise to wear hearing protection to be sure.

What is the weight of the Bosch PBD 40?

The Bosch PBD 40 has a weight of 11200 g.

Does Bosch PBD 40 have a keyless chuck?

Yes, Bosch PBD 40 has a keyless chuck. This means users can easily change drill bits without the need for a key.

Can Bosch PBD 40 adjust its speed?

Yes, Bosch PBD 40 can adjust its speed. This allows users to control the drilling speed based on the material being drilled.

What is the maximum screw diameter Bosch PBD 40 can handle?

Bosch PBD 40 can handle a maximum screw diameter of 90 mm. This makes it suitable for various screw sizes.

Does Bosch PBD 40 have hammer drilling capability?

No, Bosch PBD 40 does not have hammer drilling capability. It is designed primarily for drilling and not for hammering.

What is the maximum drilling diameter in steel for Bosch PBD 40?

The maximum drilling diameter in steel for Bosch PBD 40 is 13 mm. While this may not be the highest in the market, it is still suitable for most common steel drilling tasks.

How do I use the button for speed indicator/drill depth indicator on the Bosch PBD 40 drill machine?

To use the button for the speed indicator/drill depth indicator on the Bosch PBD 40 drill machine, follow these steps: 1. Make sure the power tool is properly assembled and mounted on a flat, stable work surface. 2. Check that all the necessary parts are included and in good condition. 3. Turn on the display by switching the on/off switch to the "on" position. 4. To switch on the power tool, turn the on/off switch to the "on" position. 5. The speed can now be adjusted using the speed regulator. 6. Press the button to switch the indicator area of the display to "Speed". 7. Turn the speed regulator until the desired speed is shown on the display. 8. Before drilling, ensure that the quick-action clamp, parallel guide, and/or machine vice are securely fastened. 9. To stop drilling, turn the on/off switch to the "off" position. 10. To completely switch off the power tool, turn the on/off switch to the "0" position. By following these steps, you can effectively use the button for the speed indicator/drill depth indicator on the Bosch PBD 40 drill machine.

How do I adjust the zero point button on the Bosch PBD 40 drill machine?

To adjust the zero point button on the Bosch PBD 40 drill machine, follow these steps: 1. Make sure the clamping lever (7) is freewheeling and can be turned into a comfortable or space-saving position. 2. With the clamping lever tightened, pull the handle away from the drive unit and turn it to the required position. 3. Release the clamping lever to secure the handle in place. 4. To switch on the display (14), turn the on/off switch (13) to the "on" position. 5. To switch on the power tool, turn the on/off switch (13) to the "on" position. 6. The speed can now be adjusted. 7. To stop drilling, turn the on/off switch (13) to the "off" position. 8. To switch off the power tool completely, turn the on/off switch (13) to the "0" position. 9. To quickly stop the power tool, briefly press the on/off switch (13). 10. To start the power tool again, return the on/off switch (13) to the "0" position and then switch it back to the "on" position. 11. The power tool has restart protection, which prevents it from starting up again uncontrolledly after a power failure. 12. The power tool also has overload protection to prevent overloading. 13. Before starting work, select the correct rotational speed using the speed diagram (6) based on the drilling diameter and material. 14. The power tool has mechanical gear selection with two speed ranges: Gear 1 for large drilling diameters and Gear 2 for small drilling diameters. 15. The speed regulator (15) allows for continuously variable adjustment of the speed. 16. Adjust the height of the drive unit (12) according to the length of the application tool and the size of the workpiece. 17. After adjusting the height, check the position of the workpiece using the laser cross and reposition if necessary. 18. The brake prevents the drive unit (12) from sinking unintentionally when the clamping lever (7) is released. 19. Check the clamping force of the brake occasionally and adjust if required. 20. Ensure that the hand wheel (11) is in its initial position before adjusting the height of the drive unit. 21. Hold the hand wheel (11) with one hand and use the other hand to release the clamping lever (7) by turning it counterclockwise. 22. Use the hand wheel to adjust the height of the drive unit to correspond to the application tool and the height of the workpiece. 23. Retighten the clamping lever by turning it clockwise. These steps will help you adjust the zero point button on the Bosch PBD 40 drill machine.

What accessories are included with the Bosch PBD 40 drill machine?

The Bosch PBD 40 drill machine comes with several accessories included in the package. Before using the power tool, carefully check that all the parts listed below have been supplied: 1. Drive unit with drill column: This is the main component of the drill machine that houses the motor and controls the drilling operation. 2. Base plate: The base plate provides stability and support for the drill machine during operation. 3. Quick-action clamp: This clamp allows you to securely hold the workpiece in place while drilling. 4. Parallel guide: The parallel guide helps you maintain a consistent distance between the drill bit and the edge of the workpiece, ensuring accurate drilling. 5. Hex key: The hex key is used for tightening and loosening screws and bolts on the drill machine. Please note that the accessories shown or described may vary, and the ones mentioned above are the standard accessories included with the Bosch PBD 40 drill machine. For a complete selection of accessories, you can refer to Bosch's accessories range. It is important to carefully assemble the power tool according to the instructions provided in the manual before use. Ensure that all protective devices are in place and that all parts are fitted correctly for smooth operation. If any parts are damaged, they should be repaired or replaced by an authorized service center. Remember to always follow safety guidelines and wear appropriate protective gear when using the Bosch PBD 40 drill machine.

What are the technical specifications and noise information for the Bosch PBD 40 drill machine?

The technical specifications for the Bosch PBD 40 drill machine are as follows: - Rated power input: 710 W - No-load speed: 200-850 rpm (1st gear), 600-2500 rpm (2nd gear) - Laser type: 650 nm, <1 mW - Laser class: 2 - Divergence of laser line: 0.5 mrad (full angle) - Max. drilling diameter: 13 mm (steel), 40 mm (wood) - Chuck capacity: 1.5-13 mm - Max. drill stroke: 90 mm - Total height: 650 mm - Base plate dimensions: 330 x 350 x 30 mm - Weight: 11.2 kg The noise emission values for the Bosch PBD 40 drill machine have been determined according to EN 62841-3-13. The A-weighted sound pressure level of the power tool is typically 73 dB(A), with an uncertainty of 3 dB. It is important to note that the actual noise level when working with the drill machine may exceed the stated volume. Therefore, it is recommended to wear hearing protection while using the tool. Please note that these specifications are based on a rated voltage of 230 V. The specifications may vary at different voltages and in country-specific models.

Is the manual of the Bosch PBD 40 available in English?

Yes, the manual of the Bosch PBD 40 is available in English .

Is your question not listed? Ask your question here

No results