View the manual for the Bosch NDC-255-P here, for free. This manual comes under the category security cameras and has been rated by 1 people with an average of a 7.8. This manual is available in the following languages: English. Do you have a question about the Bosch NDC-255-P or do you need help? Ask your question here

| Brand | Bosch |
| Model | NDC-255-P | F.01U.140.887 |
| Product | security camera |
| Language | English |
| Filetype | User manual (PDF) |
| Maximum resolution | 640 x 480 pixels |
| Video formats supported | H.264, M-JPEG, MPEG4 |
| Supported graphics resolutions | 320 x 288 (QVGA), 640 x 480 (VGA) |
| Supported video modes | - |
| Minimum illumination | 1 lx |
| Sensor type | CMOS |
| Optical sensor size | 1/4 " |
| Optical zoom | - x |
| Focal length range | 2.8 - 10 mm |
| Focus adjustment | 1.2 |
| Built-in HDD | No |
| Card reader integrated | Yes |
| Compatible memory cards | microSD (TransFlash), SDHC |
| Night vision | No |
| Type | IP security camera |
| PTZ control | No |
| Placement supported | Indoor |
| Alarm input/output | Yes |
| Connectivity technology | Wired |
| Form factor | Dome |
| Product color | Black, White |
| Mounting type | Ceiling |
| Microphone in | Yes |
| Ethernet LAN (RJ-45) ports | 1 |
| DC-in jack | Yes |
| Built-in microphone | Yes |
| Ethernet LAN | Yes |
| Cabling technology | 10/100Base-T(X) |
| Wi-Fi | No |
| Supported network protocols | HTTP, HTTPs, SSL, TCP, UDP, ICMP, RTSP, RTP, RTCP, IGMPv2/v3, SMTP, POP3, FTP, DHCP client, ARP, DNS, DDNS, NTP, SNMP, UPnP |
| Compliance industry standards | IEEE 802.3af |
| Power requirements | 12 VDC / PoE |
| Data transfer rate | 100 Mbit/s |
| Height | 102 mm |
| Diameter | 135 mm |
| Weight | 548 g |
| Power over Ethernet (PoE) | Yes |
| Power consumption (typical) | 4.1 W |
| Power source type | PoE |
| Web-based management | Yes |
| Operating temperature (T-T) | -10 - 50 °C |
| Storage temperature (T-T) | -20 - 70 °C |
| Operating relative humidity (H-H) | 10 - 80 % |
Can't find the answer to your question in the manual? You may find the answer to your question in the FAQs about the Bosch NDC-255-P below.
The Bosch NDC-255-P has a weight of 548 g.
The number of megapixels denotes how many pixels there are in the sensor. 1 megapixel equals 1 million pixels. The more pixels, the higher the potential image quality.
MP stands for MegaPixels.
The Bosch NDC-255-P has a height of 102 mm.
No, the Bosch NDC-255-P has maximum resolution of 640 x 480 pixels, which is relatively low. This means the user may experience lower image quality compared to cameras with higher resolutions.
Yes, the Bosch NDC-255-P has a minimum illumination requirement of 1 lx, allowing it to capture clear images even in low light environments. This is beneficial for users who require surveillance in poorly lit areas.
No, the Bosch NDC-255-P does not have a built-in HDD. This means the user will need to utilize external storage devices or network storage options to store the recorded footage.
No, the Bosch NDC-255-P does not have night vision capabilities. This may limit its effectiveness in monitoring areas during nighttime or low light conditions.
The Bosch NDC-255-P is designed for indoor use and can be mounted on the ceiling. This makes it suitable for monitoring indoor spaces such as offices, retail stores, or homes.
To integrate the Bosch NDC-255-P security camera with the Bosch Divar 700 Series recorder, follow these steps: 1. Ensure that both the Bosch NDC-255-P security camera and the Bosch Divar 700 Series recorder are powered on and connected to the same network. 2. Access the web interface of the Bosch NDC-255-P security camera by entering its IP address in a web browser. 3. Log in to the camera's web interface using the appropriate credentials. 4. Navigate to the camera's settings or configuration page. 5. Locate the "Integration" or "Recording" section in the camera's settings. 6. Enable the integration feature or recording functionality. 7. Enter the IP address or hostname of the Bosch Divar 700 Series recorder in the designated field. 8. Save the settings and exit the camera's web interface. 9. Access the web interface of the Bosch Divar 700 Series recorder by entering its IP address in a web browser. 10. Log in to the recorder's web interface using the appropriate credentials. 11. Navigate to the recorder's settings or configuration page. 12. Locate the "Camera Integration" or "Camera Configuration" section in the recorder's settings. 13. Add the Bosch NDC-255-P security camera to the list of integrated cameras. 14. Save the settings and exit the recorder's web interface. Once these steps are completed, the Bosch NDC-255-P security camera will be integrated with the Bosch Divar 700 Series recorder, allowing you to record and manage the camera's video feed using the recorder's interface.
The images captured by the Bosch NDC-255-P security camera may not be clear or accurate in color due to the following reasons: 1. Lighting conditions: Ensure that the camera is installed in an area with adequate lighting. Insufficient lighting can result in blurry or distorted images. Consider adjusting the camera's exposure settings or installing additional lighting sources if necessary. 2. Focus adjustment: Check if the camera's lens is properly focused. If the focus is not set correctly, it can affect the clarity of the images. Adjust the focus by rotating the lens or using the camera's focus adjustment feature. 3. Image settings: Verify that the camera's image settings are configured correctly. Incorrect settings such as brightness, contrast, or saturation can impact the color accuracy of the images. Adjust these settings through the camera's web interface or configuration software. 4. Network bandwidth: Insufficient network bandwidth can cause image quality issues. Ensure that the camera is connected to a stable and high-speed network. If multiple cameras are connected to the same network, consider optimizing the network bandwidth allocation. 5. Camera positioning: Check if the camera is positioned correctly to capture the desired area. Incorrect positioning can result in images that are not clear or accurate. Adjust the camera's angle and position to ensure optimal coverage. By addressing these factors, you can improve the clarity and color accuracy of the images captured by the Bosch NDC-255-P security camera.
To customize the three different data streams in the tri-streaming video feature of the Bosch NDC-255-P security camera, follow these steps: 1. Access the camera's web interface by entering its IP address in a web browser. 2. Log in to the camera's web interface using the appropriate credentials. 3. Navigate to the camera's settings or configuration page. 4. Locate the "Streaming" or "Video" section in the camera's settings. 5. Enable the tri-streaming feature if it is not already enabled. 6. Within the tri-streaming settings, you will find options to customize the three different data streams. 7. Configure the settings for each data stream according to your preferences. You can adjust parameters such as resolution, frame rate, compression format (H.264 or M-JPEG), and bitrate. 8. Consider the purpose of each data stream when customizing the settings. For example, you may want to optimize one stream for local recording and viewing, while another stream may be tailored for compatibility with legacy DVRs. 9. Save the settings and exit the camera's web interface. By following these steps, you can customize the three different data streams in the tri-streaming video feature of the Bosch NDC-255-P security camera to meet your specific requirements.
If the microSD/SDHC card used for edge recording in the Bosch NDC-255-P security camera is not functioning properly, you can try the following steps to troubleshoot the issue: 1. Ensure that the microSD/SDHC card is inserted correctly into the camera's card slot. Remove the card and reinsert it, making sure it is securely seated. 2. Check if the microSD/SDHC card is formatted correctly. The camera supports up to 32 GB microSD/SDHC cards. If the card is not formatted or formatted with an incompatible file system, format it using the camera's web interface or a computer. 3. Verify that the microSD/SDHC card is not full. If the card has reached its storage capacity, delete unnecessary recordings or replace the card with a new one. 4. Test the microSD/SDHC card in another device to determine if the issue is with the card itself. If the card works fine in another device, the problem may be with the camera's card slot or firmware. 5. Update the camera's firmware to the latest version. Check the manufacturer's website for firmware updates and follow the instructions provided to update the camera's firmware. 6. If none of the above steps resolve the issue, consider contacting the manufacturer's customer support for further assistance or to inquire about a possible replacement of the camera or microSD/SDHC card. By following these steps, you can troubleshoot and resolve issues related to the microSD/SDHC card used for edge recording in the Bosch NDC-255-P security camera.
To connect an iSCSI server to the Bosch NDC-255-P security camera for long-term recordings, follow these steps: 1. Ensure that the iSCSI server is set up and connected to the same network as the camera. 2. Access the camera's web interface by entering its IP address in a web browser. 3. Log in to the camera's web interface using the appropriate credentials. 4. Navigate to the camera's settings or configuration page. 5. Locate the "Storage" or "Recording" section in the camera's settings. 6. Enable the iSCSI feature or recording to an iSCSI server. 7. Enter the IP address or hostname of the iSCSI server in the designated field. 8. Configure the storage settings, such as the target name or volume name, on the iSCSI server. 9. Save the settings and exit the camera's web interface. 10. Verify the connection between the camera and the iSCSI server by checking the status or connection information in the camera's web interface. By following these steps, you can connect an iSCSI server to the Bosch NDC-255-P security camera for long-term recordings. The camera will store the recordings on the iSCSI server, providing a centralized and scalable storage solution.
Yes, the manual of the Bosch NDC-255-P is available in English .
Is your question not listed? Ask your question here
No results
Need help?
Do you have a question about the Bosch and is the answer not in the manual?
Question and answer
Number of questions: 0