Bosch Maxx 6 WAE24063 manual

Bosch Maxx 6 WAE24063
8.2 · 135
PDF manual
 · 8 pages
English
manualBosch Maxx 6 WAE24063
7
Overview of programmes a refer to the table of consumption values on page 8 and notes on page 6.
Programmes °C max.
Type of laundry
Additional functions; information
Cottons 20, 30, 40, 60, 90 °C 6 kg
Hard-wearing fabrics, heat-resistant fabrics made of cot-
ton or linen
Rinse Plus, Express Wash
Easy-Care 30, 40 °C
3 kg
Easy-care fabrics made of cotton, linen, synthetic fibres or
blended fabrics
Rinse Plus, Express Wash
Mixed Load 30 °C Fabrics made of cotton or easy-care fabrics
Rinse Plus, Express Wash;
different types of laundry can be washed together
Delicates 30 °C
2 kg
For delicate, washable fabrics, e.g. made of silk, satin,
synthetic fibres or blended fabrics (e.g. curtains)
Rinse Plus, Express Wash;
No spin between rinse cycles
:÷/ Wool 30 °C
Handä or machine-washable fabrics made of wool or con-
taining wool
Particularly gentle wash programme to prevent shrink-
age of laundry. Longer programme breaks (fabrics rest
in the detergent solution)
Additional
programmes
Rinse, Spin, Drain
Programmes without prewash - add detergent to compartment II, programmes with prewash - distribute the detergent between compartments I and II (model-dependent).
9403 / 9000978497

*978497*

WAE24063GB ...
Robert Bosch Hausgeräte GmbH
Carl-Wery-Str. 34
81739 München / Deutschland
8

Safety instructions

Read the instruction manual and installation instructions and all other information enclosed
with the washing machine and act accordingly.
Retain the documents for subsequent use.
Risk of electric shock Never pull the cable to disconnect the mains plug.
Never insert/disconnect the mains plug with damp hands.
Danger to life For worn-out appliances:
Disconnect the mains plug.
Sever the mains cable and discard along with the plug.
Destroy the lock on the washing machine door. This will prevent
children from locking themselves in and risking their lives.
Danger of suffocation Keep packaging, film and packaging parts out of the reach of
children.
Risk of poisoning Keep detergents and care products out of the reach of children.
Risk of explosion Items of laundry pretreated with cleaning agents containing
solvents, e.g. stain remover/cleaning solvent may cause an
explosion after being loaded into the washing machine.
Rinse items of laundry thoroughly by hand beforehand.
Risk of injury The washing machine door can become very hot.
Be careful when draining hot detergent solution.
Do not climb onto the washing machine.
Do not lean on the open washing machine door.
Do not reach into the drum if it is still rotating.
Be careful when opening the detergent drawer while the machine
is in operation.

Consumption values depending on model

Programme Load Electricity** Water**
Programmeduration**
Cottons 20 °C 6 kg 0,33 kWh 62 l 1 B h
Cottons 40 °C 6 kg 0,78 kWh 62 l 2 h
Cottons 60 °C 6 kg 1,22 kWh 62 l 2 @ h
Cottons 90 °C 6 kg 1,94 kWh 65 l 2 @ h
Easy-Care 40 °C 3 kg 0,61 kWh 52 l 1 B h
Mixed Load 30 °C 3 kg 0,27 kWh 60 l 1 h
Delicates 30 °C
2 kg 0,29 kWh 51 l B h
: / Wool 30 °C
2 kg 0,17 kWh 33 l 1 hProgramme LoadAnnual energy consumptionAnnual water consumption
Cottons / ~* 6 kg 152 kWh 10120 l
* Programme setting for testing and energy labelling in accordance with EU directive 2010/30/EU with cold water
(15 ºC).
** The values deviate from the indicated values depending on water pressure, hardness, and inlet temperature, ambient
temperature, type, amount and soiling of the laundry, detergent used, fluctuations in the power supply and selected additional functions.
9
Care
Before washing for the first time
Do not load any laundry into the machine. Turn on the tap.
Add the following to compartment II:
approx. 1 litre water
detergent (dosage according to the manufacturer's instructions for light soiling and the
appropriate degree of water hardness)
Set the programme selector to Cottons 60 °C and select Start. At the end of the programme,
turn the programme selector to Off.
Machine housing, control panel
Wipe with a soft, damp cloth.
Do not use any abrasive cloths, scourers or cleaning agents (stainless steel cleaners).
Remove detergent and cleaning agent residue immediately.
Do not clean with a jet of water.
Cleaning the detergent drawer and housing...
... if it contains detergent or fabric softener residues.
1. Pull the drawer out, press down the insert and fully remove the drawer
from the housing.
2. To remove the insert: press the insert upwards from below with your
finger.
3. Clean the detergent dispenser tray and insert with water and a brush and
dry it. Also remove any detergent or fabric softener residues in the
housing.
4. Attach the insert and engage (connect the cylinder to the guide pin).
5. Push in the detergent drawer.
Leave the detergent drawer open so that any residual water can
evaporate.
Washing drum and rubber seal
Wipe the inside of the rubber seal dry with a cloth. Leave the washing machine door open so
that the drum can dry out. Rust stains - use chlorine-free cleaning agent, not steel wool.
Descaling Ensure there is no laundry in the machine
Descale the appliance according to the descaler manufacturer's instructions. This should not
be necessary if the correct dosage of detergent is used.

Information to indicator lights

Indicator lights for status displays and/or buttons flash:
Indicator lights
Rinse and
Wash flash
Close the washing machine door properly; laundry may be caught.
Indicator lights
Spin and
Wash flash
Open the tap completely, supply hose kinked or trapped;
Clean the filter a page 10, Water pressure too low.
Indicator lights
Spin and
Rinse flash
Detergent solution pump blocked; Clean the detergent solution pump
a page 10.
Drainage hose/waste pipe blocked; Clean the drainage hose at the
siphon a page 10.
Indicator light
Rinse flashes
Motor fault. Call the after-sales service.
All indicator lights flash Turn off the tap and call the after-sales service.
Risk of electric shock. Disconnect the mains plug.
Risk of explosion. No solvents.
10

Maintenance

Detergent solution pump
Turn the programme selector to Off and disconnect the mains plug.
1. Open and remove the service flap.
2. For models with a drainage hose: Remove the drainage hose from the retainer and pull it
from the housing. Remove the container.
Remove the sealing cap, allow the detergent solution to flow out.
Replace the sealing cap and place the drainage hose in the retainer.
2* For models without a drainage hose: Carefully unscrew the pump cover until the
detergent solution begins to flow out. When the service flap is half full, close the pump cover
and empty the service flap. Repeat the above steps until all the detergent solution has
completely drained out.
3. Carefully unscrew the pump cover (residual water).
4. Clean the interior, pump cover thread and pump housing (the impeller in the detergent
solution pump must rotate).
5. Replace the pump cover and screw it tightly in place.
6. Place the service flap back on and close.
To prevent unused detergent from flowing straight into the drain during the next wash: pour 1 litre of water into
compartment II and start the Drain programme.
Drainage hose at the siphon
Turn the programme selector to Off and disconnect the mains plug.
1. Loosen the hose clamp, carefully remove the drainage hose (residual water).
2. Clean the drainage hose and siphon connecting piece.
3. Reattach the drainage hose and secure the connection with the hose clamp.
Filter in the water supply
Reduce the water pressure in the supply hose:
1. Turn off the tap.
2. Select any programme (except for Spin / Drain).
3. Select Start. Let the programme run for approximately 40 seconds.
4. Turn the programme selector to Off. Disconnect the mains plug.
Clean the filter:
1. Depending on model:
Disconnect the hose from the tap.
Clean the filter using a small brush.
and/or for Standard and Aqua-Secure models:
Remove the hose on the rear of the appliance.
Remove the filter with pliers and clean.
2. Connect the hose and check for leaks.
Risk of scalding.
Allow the detergent solution to cool down.
Turn off the tap.
11

What to do if ...

ʑ
Water is leaking out. Attach/replace the drainage hose correctly.
Tighten the screw connection of the supply hose.
ʑ
No water supply.
Detergent not dispensed.
Start not selected?
Tap not turned on?
Filter blocked? Clean the filter a page 10.
Supply hose kinked or trapped?
ʑ
Washing machine door
cannot be opened.
Safety function active. Wait approx. 2 minutes.
ʑ
Programme does not
start.
Start selected?
Washing machine door closed?
ʑ
Detergent solution is not
drained.
Clean the detergent solution pump a page 10.
Clean the waste pipe and/or drainage hose.
ʑ
Water not visible in the
drum.
Not a fault - water below the visible area.
ʑ
Unsatisfactory spin
result.
Laundry wet/too damp.
Not a fault - the unbalanced-load detection system has cancelled
the spin cycle because of uneven distribution of the laundry.
Distribute small and large items of laundry evenly inside the
drum.
ʑ
Spin cycle performed
several times.
Not a fault - unbalanced load detection system adjusts the
imbalance.
ʑ
Residual water in the
compartment for care
products.
Not a fault - the action of the care product is not affected.
Clean the insert if necessary a page 9.
ʑ
Odour formation in the
washing machine.
Run programme Cottons 90 °C without laundry. Use standard
detergent.
ʑ
Foam escaping from the
detergent drawer.
Too much detergent used?
If foam is escaping from the detergent drawer:
Mix 1 tablespoon of fabric softener with ½ litre of water and pour
into compartment II (not with outdoor or down fabrics).
Reduce the detergent dosage for the next wash cycle.
ʑ
Intense noise formation,
vibrations and “walking”
during the spin cycle.
Are the appliance feet fixed?
Secure the appliance feet a Installation instructions.
Transportation safety devices removed?
Remove the transportation safety devices a Installation
instructions.
ʑ
Noises during spin and
drain cycles.
Clean detergent-solution pump a page 10.
ʑ
The indicator lights do
not function during
operation.
Power cut?
Fuses tripped? Reset/change the fuse.
If the fault occurs repeatedly, call the after-sales service.
ʑ
Programme sequence
longer than usual.
Not a fault - unbalanced load detection system adjusts
imbalance by repeatedly distributing the laundry.
Not a fault - foam detection system active - adds an additional
rinse cycle.
ʑ
Detergent residues on
the laundry.
Occasionally, phosphate-free detergents contain water-insoluble
residues.
Select Rinse or brush out the laundry after washing.
If you cannot correct a fault yourself (switching on/off) or a repair is required:
Turn the programme selector to Off and remove the mains plug from the socket.
Turn off the water supply and call the after-sales service a Installation instructions.
en operating instructions
Washing machine
WAE24063GB ...

View the manual for the Bosch Maxx 6 WAE24063 here, for free. This manual comes under the category washing machines and has been rated by 135 people with an average of a 8.2. This manual is available in the following languages: English. Do you have a question about the Bosch Maxx 6 WAE24063 or do you need help? Ask your question here

Need help?

Do you have a question about the Bosch and is the answer not in the manual?

  • Receive updates on solutions
  • Get answers to your question

Question and answer

Number of questions: 139
R
Robin keyteJanuary 24, 2023

I started a wash today and water leaked out of the detergent loader, see image. I stopped the wash and then restarted and it worked ok. What could have caused the leak and how do I prevent this in the future?

I started a wash today and water leaked out of the detergent loader, see image. I stopped the wash and then restarted and it ...
zoom-in
View photo
This message has been automatically translated
H
Hilmija October 20, 2021

Why does F-35 appear on the timer and the machine won't perform any other operation and the spin cycle hasn't been completed?

Why does F-35 appear on the timer and the machine won't perform any other operation and the spin cycle hasn't been completed?
zoom-in
View photo
This message has been automatically translated
V
Vali Rotaru May 27, 2021

This error is displayed and does not allow me to start any program, also the rotations per minute cannot be changed...thank you.

This error is displayed and does not allow me to start any program, also the rotations per minute cannot be changed...thank y...
zoom-in
View photo
This message has been automatically translated
A
Asbjørn ØyeFebruary 4, 2021

When the machine is set to a program, all the displays for the spin cycle options just keep blinking. The machine is not working. What can be done?

This message has been automatically translated
S
SharonApril 5, 2020

Hi ,what is the quickest cycle on the Bosch maxx6 please for clothes that are not so dirty but just need freshening?

4 comments
E
Emma of manua.lsOctober 24, 2023

The quickest cycle on the Bosch Maxx 6 WAE24063 washing machine is the "Express Wash" cycle. This cycle is suitable for clothes that are not heavily soiled but just need a refresh. It has a reduced wash time with only 2 rinse cycles. It is recommended for a maximum load of 6.6 pounds.

This answer is automatically generated
R
Richard WorkmanAugust 16, 2021

I am unable to switch my Bosch Maxx 6 on. The machine has been loaded with washing, and I am unable to activate the program

L
laszlo de topazJuly 16, 2021

QUICKEST AND SHOTEST WASH

M
Mary dennisFebruary 27, 2023

How long does it take to complete an express wash cycle on the easy care setting at 40 degrees on the Bosch Maxx 6 WAE24063 washing machine?

This message has been automatically translated
S
Sarah BarrettFebruary 17, 2020

How do you find the 'short wash' setting on the Bosch Maxx 6?

9 comments
E
Emma of manua.lsOctober 24, 2023

To find the 'short wash' option on the Bosch Maxx 6 washing machine, do the following: 1. Turn on the washing machine using the power switch. 2. Use the program selector knob to scroll through the available programs. 3. Look for a program called "Express Wash" or something similar. This program is designed for shorter wash cycles. 4. Select the "Express Wash" program by turning the program selector knob to the corresponding position. 5. Press the start button to begin the wash cycle.

This answer is automatically generated
P
PeteJune 13, 2020

How long does a 60 degree wash take

A
Anitha MoasaJanuary 26, 2021

How do I open it after washing

S
SydJanuary 7, 2023

Where do I add liquid washing machine cleaner solution?

This message has been automatically translated

General
BrandBosch
ModelMaxx 6 WAE24063 | WAE24063GB
Productwashing machine
EAN4242002805948
LanguageEnglish
FiletypeUser manual (PDF)
Design
Appliance placementFreestanding
Product colorWhite
Loading typeFront-load
Built-in displayYes
Door hingeLeft
Door opening angle180 °
Drum materialStainless steel
Drum volume55 L
Door colorWhite
Tub materialPlastic
Control typeButtons, Rotary
CertificationCE, VDE
Cord length1.6 m
Performance
Load balancing systemYes
Drum capacity6 kg
Maximum spin speed1200 RPM
Spin-drying classC
Number of washing programs-
Noise level (wash)60 dB
Cycle time (max)230 min
Foam control systemYes
Delayed start timerNo
Noise level (spin)76 dB
Half-load-
Residual moisture60 %
Hygiene/anti-allergy, Black, Cotton, Hand/wool, Mix, Delicate/silk
Other features
Washing classA
Annual energy consumption washing152 kWh
Annual water consumption washing10120 L
Ergonomics
Adjustable feetYes
Feet adjustment18 mm
LED program stage indicatorYes
Power
A+++
Energy consumption washing per cycle0.65 kWh
Water consumption per cycle- L
Current10 A
AC input voltage220 - 240 V
AC input frequency50 Hz
Power consumption (off)0.13 W
Connected load2300 W
Weight & dimensions
Width600 mm
Depth590 mm
Height848 mm
Weight68000 g
Door diameter300 mm
Depth with door open990 mm
Packaging data
Package weight69000 g
show more

Can't find the answer to your question in the manual? You may find the answer to your question in the FAQs about the Bosch Maxx 6 WAE24063 below.

What temperature should I use for my laundry?

The washing label of your garment shows the recommended washing temperature.

Do I need to use an anti-scaling agent for my washing machine?

It is not necessary to use an anti-scaling agent. Scale deposits can be prevented by limiting washing at high temperatures and using the recommended amount of detergent per wash.

How do I prevent my washing machine from smelling?

Unpleasant odours can be avoided by occasionally washing at 60 degrees and using the recommended amount of detergent per wash.

What is the weight of the Bosch Maxx 6 WAE24063?

The Bosch Maxx 6 WAE24063 has a weight of 68000 g.

What certifications does the Bosch Maxx 6 WAE24063 have?

The Bosch Maxx 6 WAE24063 has the following certifications: CE, VDE.

What is the height of the Bosch Maxx 6 WAE24063?

The Bosch Maxx 6 WAE24063 has a height of 848 mm.

What is the width of the Bosch Maxx 6 WAE24063?

The Bosch Maxx 6 WAE24063 has a width of 600 mm.

What is the depth of the Bosch Maxx 6 WAE24063?

The Bosch Maxx 6 WAE24063 has a depth of 590 mm.

How do I properly load clothes into the washing machine?

To load clothes correctly, make sure to distribute them evenly inside the drum without overstuffing it. Leave enough space for the clothes to move freely during the wash.

How can I select the right washing program for different types of laundry?

Consult the manual to learn about the various washing programs available on your Bosch Maxx 6 WAE24063. Each program is designed to cater to specific fabrics or levels of dirt, ensuring optimal washing results.

Why is the washing machine not starting when I press the power button?

Verify that the power cable is securely plugged into a working electrical outlet. Additionally, check if the door is completely closed, as the machine will not start if the door is open or not properly latched.

How can I troubleshoot if the machine is not draining properly?

First, ensure that the drain hose is securely connected to the machine and not clogged. Then, refer to the manual to locate and clean the drain pump filter. If the issue persists, it is advisable to contact a professional technician for further assistance.

How do I clean the detergent dispenser drawer?

Remove the detergent dispenser drawer from the washing machine and rinse it under running water. Use a soft brush to clean any detergent residues or build-up. Make sure the drawer is completely dry before reinserting it into the machine.

Does Bosch Maxx 6 WAE24063 have a built-in display?

Yes, Bosch Maxx 6 WAE24063 has a built-in display. This allows the user to easily view and control the washing machine settings.

Does Bosch Maxx 6 WAE24063 have a load balancing system?

Yes, Bosch Maxx 6 WAE24063 has a load balancing system. This ensures that the load inside the machine is evenly distributed, leading to more efficient and stable washing cycles.

What is the drum material of Bosch Maxx 6 WAE24063?

The drum of Bosch Maxx 6 WAE24063 is made of stainless steel. This material is known for its durability and resistance to corrosion, ensuring that the drum will last a long time.

What is the rated capacity of Bosch Maxx 6 WAE24063?

The rated capacity of Bosch Maxx 6 WAE24063 is 6 kg. This means that the washing machine can handle a maximum load of 6 kg of laundry, making it suitable for smaller households or individuals.

What is the noise level during washing of Bosch Maxx 6 WAE24063?

The noise level during washing of Bosch Maxx 6 WAE24063 is 60 dB. This indicates that the washing machine operates at a relatively quiet level, making it suitable for use in homes without causing too much disturbance.

Is the manual of the Bosch Maxx 6 WAE24063 available in English?

Yes, the manual of the Bosch Maxx 6 WAE24063 is available in English .

Is your question not listed? Ask your question here

No results