Bosch ISC-BPR2 manual

Bosch ISC-BPR2
7.7 · 2
PDF manual
 · 2 pages
English
manualBosch ISC-BPR2
© 2013 Bosch Security Systems, Inc. F.01U.140.812 | 07 | 2013.09 | 1
NOTE:
This equipment has been tested and found to comply with the limits for
a Class B digital device, pursuant to Part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses
and can radiate radio frequency energy and, if not installed and used
in accordance with the instructions, may cause harmful interference to
radio communications. However, there is no guarantee that interference
will not occur in a particular installation. If this equipment does cause
harmful interference to radio or television reception, which can be
determined by turning the equipment off and on, the user is encouraged
to try to correct the interference by one or more of the following
measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from
that to which the receiver is connected.
UL/C-UL
Perform Walk Test at least once a year.
Pet immunity not tested by UL/C-UL.
Use only a Listed limited-power source.
The Listed control unit or a Listed burglary power supply must provide 4
hours (40 mAh) of standby power.
Install the unit in accordance with National Electrical Code NFPA 70 and
Part 1 of the Canadian Electrical code CSA C22.1.
Sluit alle bedrading uitsluitend aan op een circuit met een extra lage veiligheidsspanning.Prenez soin de connecter tous les câbles à un circuit à très basse tension de sécurité (TBTS).Alle Drähte sind ohne Ausnahme an Niederspannung anzuschließen.Collegare tutti i cavi esclusivamente a un circuito SELV (circuito di sicurezza a bassissima tensione).
0 - 95% Relative Humidity
(0 - 85% UL/C-UL installations)
-30°C to +55°C
(-20°F to +130°F )
UL Listed installations,
the temperature
range is 0°C to +49°C
(+32°F to +120°F)
Pour les installations
certifiées NFA2P,
Température de
fonctionnement
-10°C à +55°C
Changes or modifications not expressly approved by Bosch Security Systems, Inc. can void the user’s authority to operate the equipment.Optional Brackets:B328, B338, B335EN 50131-2-2 Grade 2 EN 50130-5 Environmental Class IIIP30 IK04 (EN 60529, EN 62262)Conecte el cableado únicamente a un circuito de seguridad para voltajes muy bajos (SELV).INCERT B-509-0051/bLigue todas as cablagens apenas a um circuito de segurança de tensão extra baixa (SELV).
Certificat NF A2P 2620200001-B0
en Installation Guide
2 boucliers NF324 - H58
Autosurveillance à l’ouverture
Immunité champ magnétique
Test sans masque de vision verticale
et sans immunité aux animaux
www.afnor.org
www.cnpp.com
För svensk installationsanvisning se www.boschsecurity.se.
2
1

1 2 3

4
2,2 m - 2,75 m
(7.5 ft - 9 ft)
Recommended:
2,2m (7.5 ft)
Pet Friendly≤ 20 kg (45 lb)

Blue Line Gen2

Pet Friendly PIR

Motion Detector

ISC-BPR2-WP12

View the manual for the Bosch ISC-BPR2 here, for free. This manual comes under the category motion detectors and has been rated by 2 people with an average of a 7.7. This manual is available in the following languages: English. Do you have a question about the Bosch ISC-BPR2 or do you need help? Ask your question here

Need help?

Do you have a question about the Bosch and is the answer not in the manual?

  • Receive updates on solutions
  • Get answers to your question

Question and answer

Number of questions: 0

The Bosch ISC-BPR2 is a wired motion detector used for outdoor security purposes. It is equipped with a passive infrared (PIR) sensor that can detect movements within a range of 12 meters by 12 meters. The maximum range it can detect is also 12 meters. This motion detector has a standby current of 10 mA, meaning that it consumes minimal power when it is not detecting any motion. It has a compact size, measuring 61 x 44 x 105 millimeters, and is designed for wall mounting. The Bosch ISC-BPR2 is suitable for use in various environments, and its PIR sensor is designed to filter out false alarms caused by the movement of small animals, vibrations, and weather conditions. As a wired device, it requires a physical connection to power and to a security system or other wired control unit. Overall, the Bosch ISC-BPR2 is a reliable and durable motion detector that provides accurate and effective detection of movements in outdoor environments. Its PIR sensor technology and compact size make it a useful security solution for homes and businesses.

General
BrandBosch
ModelISC-BPR2 | F.01U.134.143
Productmotion detector
LanguageEnglish
FiletypeUser manual (PDF)
Security
Outdoor range12m x 12m
Connectivity technologyWired
Sensor typePassive infrared (PIR) sensor
Other features
Maximum range12 m
Dimensions (WxDxH)61 x 44 x 105 mm
Power
Standby current10 mA
Input voltage9 - 15 V
Features
Mounting typeWall
Product colorWhite
Operational conditions
Operating temperature (T-T)-30 - 55 °C
show more

Can't find the answer to your question in the manual? You may find the answer to your question in the FAQs about the Bosch ISC-BPR2 below.

How do I adjust the sensitivity of the motion detector?

To adjust the sensitivity of the Bosch ISC-BPR2 motion detector, locate the sensitivity adjustment settings on the device and use the provided buttons or knobs to increase or decrease the sensitivity level according to your requirements.

How can I change the detection range of the motion detector?

To change the detection range of the Bosch ISC-BPR2 motion detector, find the range adjustment options on the device. By adjusting these settings, you can modify the distance at which the detector can detect motion.

What should I do if the motion detector is not triggering an alarm when it detects motion?

If the Bosch ISC-BPR2 motion detector fails to trigger an alarm when motion is detected, check the power supply to ensure it is connected and operational. Additionally, verify the device's configuration settings, including alarm zones and sensitivity, to ensure everything is properly set up.

Can I disable certain areas from being monitored by the motion detector?

Yes, the Bosch ISC-BPR2 motion detector allows you to configure specific areas for monitoring or exclusion. Refer to the device's settings or configuration options to define the desired areas and adjust the monitoring accordingly.

How can I test the functionality of the motion detector?

To test the functionality of the Bosch ISC-BPR2 motion detector, you can perform a quick walk test. Simply walk in front of the detector, ensuring it is appropriately powered and armed. Observe if the detector successfully triggers an alarm or activates the desired response, indicating that it is functioning properly.

What is the maximum outdoor range of Bosch ISC-BPR2?

The maximum outdoor range of Bosch ISC-BPR2 is 12m x 12m. This means it can cover a large area, making it suitable for outdoor security purposes.

What is the connectivity technology of Bosch ISC-BPR2?

The connectivity technology of Bosch ISC-BPR2 is wired. This means it requires a wired connection for operation, ensuring a reliable and secure connection.

What type of sensor does Bosch ISC-BPR2 have?

Bosch ISC-BPR2 has a passive infrared (PIR) sensor. This type of sensor detects changes in infrared radiation, making it ideal for motion detection.

What is the maximum range of Bosch ISC-BPR2?

The maximum range of Bosch ISC-BPR2 is 12m. This means it can detect motion within a distance of up to 12 meters, providing a wide coverage area.

What is the standby current of Bosch ISC-BPR2?

The standby current of Bosch ISC-BPR2 is 10 mA. This indicates that it consumes low power while on standby, resulting in energy efficiency and reduced operating costs.

Is the manual of the Bosch ISC-BPR2 available in English?

Yes, the manual of the Bosch ISC-BPR2 is available in English .

Is your question not listed? Ask your question here

No results