Bosch Internal Compact Ci10 manual

Bosch Internal Compact Ci10
7.5 · 1
PDF manual
 · 24 pages
English
manualBosch Internal Compact Ci10
en Installation Manual and Operating Instructions

Gas Heaters

GWH 10-2 G.. / GWH 13-2 G.. / GWH 16-2 G..

6 720 608 992 (2011/12) AU
Read installation manual prior to installation of this unit!
Read user manual before putting this unit in operation!
Observe the warnings in the manuals!
The installation room must fulfill the ventilation requirements!
Installation by an authorised person only!

View the manual for the Bosch Internal Compact Ci10 here, for free. This manual comes under the category water heaters & boilers and has been rated by 1 people with an average of a 7.5. This manual is available in the following languages: English. Do you have a question about the Bosch Internal Compact Ci10 or do you need help? Ask your question here

Need help?

Do you have a question about the Bosch and is the answer not in the manual?

  • Receive updates on solutions
  • Get answers to your question

Question and answer

Number of questions: 0

The Bosch Internal Compact Ci10 is a water heater and boiler that is designed to provide efficient and reliable hot water supply for residential and commercial use. This unit is specifically engineered to fit into compact spaces, making it suitable for installations where space is limited. With its advanced technology, the Bosch Internal Compact Ci10 delivers a steady flow of hot water, ensuring that users have access to hot water whenever it is needed. This unit is equipped with a powerful heat exchanger that efficiently transfers heat from the burner to the water, resulting in rapid heating and reduced energy consumption. The Bosch Internal Compact Ci10 is built with high-quality materials that are resistant to corrosion and wear, ensuring its long-term reliability and durability. Additionally, it is designed to be user-friendly, with simple controls and easy installation. Its compact size also allows for flexibility in installation options. This water heater and boiler has a range of safety features to prevent accidents and ensure peace of mind for users. These include a pressure relief valve, a temperature control system, and an automatic shut-off feature. The Bosch Internal Compact Ci10 is designed for optimal performance and efficiency, providing a reliable and consistent hot water supply for a variety of applications. Whether it is for residential use, such as in single or multi-family homes, or for commercial use in small businesses, this water heater and boiler is a dependable choice.

General
BrandBosch
ModelInternal Compact Ci10
Productwater heater & boiler
LanguageEnglish
FiletypeUser manual (PDF)

Can't find the answer to your question in the manual? You may find the answer to your question in the FAQs about the Bosch Internal Compact Ci10 below.

What is the ideal room temperature?

Most people find that the ideal room temperature is between 19 and 22 degrees Celsius.

How do I troubleshoot if the Bosch Internal Compact Ci10 water heater & boiler is not providing hot water?

To troubleshoot if the Bosch Internal Compact Ci10 water heater & boiler is not providing hot water, you can follow these steps: 1. Check if the switch on the heater is turned on. If it is turned off, switch it on. 2. Verify that there is sufficient water flow. If the water flow is reduced, it may affect the heating process. Ensure that the water flow is adequate. 3. Adjust the temperature selector according to the desired water temperature. Make sure it is set correctly. 4. Check the gas supply. Insufficient gas supply can prevent the water heater from heating the water. If the gas cylinders are empty, replace them with full ones. 5. If the digital display shows an error code like "E9" or "A4", wait for 10 minutes and restart the heater. If the problem persists, contact a qualified technician. 6. Vent the area to ensure proper air circulation. Wait for 10 minutes and restart the heater. If the issue continues, seek assistance from a qualified technician. 7. If the temperature sensor is not making sufficient contact or is defective, contact a qualified technician for further inspection and repair. Remember, if these troubleshooting steps do not resolve the issue, it is recommended to contact a qualified technician for assistance.

What should I do if the Bosch Internal Compact Ci10 water heater & boiler is leaking?

If the Bosch Internal Compact Ci10 water heater & boiler is leaking, you can follow these steps to address the issue: 1. Check the pressure relief valve (located on the appliance) to ensure it is not releasing excessive pressure. If the pressure exceeds 1500 kPa, it may cause leaks. Contact a qualified technician to inspect and replace the valve if necessary. 2. Inspect the gas connection and gas pressure regulator. Ensure that the gas regulator is properly installed on the heater and that all gas connections are tight. Use sealing tape to ensure a complete seal. Check for any gas leaks by turning on the gas and water cocks and inspecting all connections. If there are any leaks, contact a qualified technician. 3. If the leaking persists, it may be due to a blockage in the heat exchanger caused by limescale buildup. Contact a qualified technician to clean the heat exchanger and resolve the issue. Remember, it is important to address any leaks promptly to prevent further damage or safety hazards. If you are unsure or unable to resolve the issue, it is recommended to contact a qualified technician for assistance.

How can I troubleshoot if the Bosch Internal Compact Ci10 water heater & boiler is not turning on?

To troubleshoot if the Bosch Internal Compact Ci10 water heater & boiler is not turning on, you can follow these steps: 1. Check if the switch on the heater is turned on. If it is turned off, switch it on. 2. Verify that there is sufficient gas supply. Ensure that the gas cylinders are not empty. If the gas supply is insufficient, contact a qualified technician. 3. Inspect the digital display. If the display is turned off, it may indicate a problem with the ignition. Call a qualified technician to investigate further. 4. Check the water flow. If the water flow is reduced, it can affect the ignition process. Ensure that the water flow is adequate. 5. If the digital display shows an error code like "E9" or "A4", wait for 10 minutes and restart the heater. If the problem persists, contact a qualified technician. 6. Vent the area to ensure proper air circulation. Wait for 10 minutes and restart the heater. If the issue continues, seek assistance from a qualified technician. 7. If none of the above steps resolve the issue, it is recommended to contact a qualified technician for further inspection and repair. Remember, for safety reasons, it is important to seek professional help if you are unsure or unable to troubleshoot the issue yourself.

What should I check if the Bosch Internal Compact Ci10 water heater & boiler is producing unusual noises?

To troubleshoot if the Bosch Internal Compact Ci10 water heater & boiler is producing unusual noises, you can follow these steps: 1. Check the gas supply and the position of the valves. Ensure that the gas supply is sufficient and that all valves are in the correct position. 2. Inspect the water flow and pressure. Reduced water flow or insufficient water supply pressure can cause unusual noises. Check for any blockages in the taps or mixers and ensure that the water flow is adequate. 3. Examine the gas valve and the heat exchanger for any blockages, such as limescale buildup. If either of these components is blocked, it can lead to unusual noises. Contact a qualified technician to clean or replace the affected parts. If the issue persists or if you are unsure about any of the steps, it is recommended to contact a qualified technician for further inspection and resolution. Please note that the information provided is based on the Bosch Internal Compact Ci10 water heater & boiler manual and is intended to serve as a general guide.

How do I troubleshoot if the Bosch Internal Compact Ci10 water heater & boiler is displaying an error code?

To troubleshoot if the Bosch Internal Compact Ci10 water heater & boiler is displaying an error code, you can follow these steps: 1. Check the error code displayed on the digital display. Refer to the table in the manual for the specific error code and its corresponding cause and solution. 2. If the error code indicates that the switch is turned off, check the switch position and turn it on if necessary. 3. If the error code suggests reduced water flow, verify that the water supply is sufficient and check for any blockages in the taps or mixers. Clean the taps or mixers if necessary. 4. If the error code indicates an insufficient gas supply, check the gas supply and the position of the valves. Ensure that the gas cylinders are not empty. 5. If the error code relates to a tripped temperature limiter or flue gas safety device, wait for 10 minutes and restart the heater. If the problem persists, contact a qualified technician. 6. For other error codes or if the issue persists, it is recommended to call a qualified technician for further assistance. Please note that the specific error codes and troubleshooting steps may vary. Refer to the manual for the accurate information related to the Bosch Internal Compact Ci10 water heater & boiler.

Is the manual of the Bosch Internal Compact Ci10 available in English?

Yes, the manual of the Bosch Internal Compact Ci10 is available in English .

Is your question not listed? Ask your question here

No results