View the manual for the Bosch GWS 880 here, for free. This manual comes under the category grinders and has been rated by 1 people with an average of a 8.1. This manual is available in the following languages: English. Do you have a question about the Bosch GWS 880 or do you need help? Ask your question here
Can't find the answer to your question in the manual? You may find the answer to your question in the FAQs about the Bosch GWS 880 below.
First, ensure the grinder is switched off and unplugged. Locate the spindle lock button on the body of the grinder to lock the spindle in place. Then, attach the grinding disc onto the spindle by aligning the holes and rotating it until it locks securely into place. Release the spindle lock button afterwards.
Begin by loosening the guard screw located near the front of the grinder. Rotate the guard to the desired position, ensuring it provides adequate protection and doesn't obstruct your work. Once in place, tighten the guard screw to secure it firmly.
Firstly, disconnect the grinder from the power source. Locate the carbon brushes on each side of the motor. Use a suitable tool to unscrew the brush holder caps. Replace the worn carbon brushes with new ones, ensuring they fit snugly into the brush holders. Finally, screw the brush holder caps back on.
The Bosch GWS 880 grinder does not have a variable speed feature. It operates at a constant speed determined by its power input and load. Therefore, it is not possible to adjust the speed manually.
Regularly clean the exterior of the grinder using a soft cloth to remove dust and debris. Pay attention to the ventilation slots and ensure they are clear from any obstructions. It is also important to inspect the power cord for any damage and replace it if necessary. Additionally, check the grinding disc for wear and replace it if it becomes worn or damaged.
Yes, the manual of the Bosch GWS 880 is available in English .
Is your question not listed? Ask your question here
No results
Need help?
Do you have a question about the Bosch and is the answer not in the manual?
Question and answer
Number of questions: 0