View the manual for the Bosch GWS 22-230 H Professional here, for free. This manual comes under the category grinders and has been rated by 1 people with an average of a 9.1. This manual is available in the following languages: English. Do you have a question about the Bosch GWS 22-230 H Professional or do you need help? Ask your question here




| Brand | Bosch |
| Model | GWS 22-230 H Professional | 0 601 882 L03 |
| Product | grinder |
| EAN | 3165140559768 |
| Language | English |
| Filetype | User manual (PDF) |
| Height | 140 mm |
| Depth | 515 mm |
| Weight | 5200 g |
| Input power | 2200 W |
| Output power | 1500 W |
| Power source | AC |
| Adjustable speed | No |
| Product color | Aluminium, Black, Blue, Red |
| Adjustable protective guard | Yes |
| Grinding disc diameter | 230 mm |
| Idle speed (max) | 6500 RPM |
| Sound power level | 93 dB |
| Sound pressure level | 104 dB |
| Sound level uncertainty | 3 dB |
| Vibration level (grinding) | 7.5 m/s² |
| Vibration level uncertainty (grinding) | 1.5 m/s² |
| Vibration level (sanding) | 3.5 m/s² |
| Vibration level uncertainty (sanding) | 1.5 m/s² |
| Protective guard | Yes |
| Auxiliary handle | Yes |
| Lock-nut included | Yes |
Can't find the answer to your question in the manual? You may find the answer to your question in the FAQs about the Bosch GWS 22-230 H Professional below.
The Bosch GWS 22-230 H Professional has a weight of 5200 g.
The Bosch GWS 22-230 H Professional has a height of 140 mm.
The Bosch GWS 22-230 H Professional has a depth of 515 mm.
Yes, the Bosch GWS 22-230 H Professional has an input power of 2200 Watts. This high power output means that the grinder can tackle tough grinding tasks with ease.
No, the Bosch GWS 22-230 H Professional does not have an adjustable speed feature. This makes it a straightforward tool to use without the need for speed adjustments.
The grinding disc diameter of the Bosch GWS 22-230 H Professional is 230 mm, which is a large size that allows for efficient grinding over larger surface areas.
Yes, the Bosch GWS 22-230 H Professional has an adjustable protective guard. This feature enhances user safety by allowing for customization based on the specific task at hand.
The sound power level of the Bosch GWS 22-230 H Professional is 93 dB, which is relatively high. However, this is common for power tools of this nature and users should still wear appropriate hearing protection.
To properly install and adjust the hand guard on the Bosch GWS 22-230 H Professional grinder, follow these steps: 1. Before fitting the hand guard, make sure the grinder is turned off and unplugged for safety. 2. Locate the hand guard (labeled as "15" in the manual) and ensure it is clean and free from any debris. 3. Align the hand guard with the designated mounting area on the grinder. The mounting area may have corresponding markings or grooves to guide the installation. 4. Carefully slide the hand guard onto the grinder, ensuring that it fits securely and snugly. 5. Once the hand guard is in place, check that it is properly aligned and covers the necessary areas to protect your hand during operation. 6. To adjust the hand guard, if needed, refer to the graphics page in the manual for specific instructions. 7. Make any necessary adjustments to ensure the hand guard provides adequate protection while allowing for comfortable operation. 8. Once the hand guard is installed and adjusted, you can proceed with using the Bosch GWS 22-230 H Professional grinder safely. Remember to always follow the manufacturer's instructions and safety guidelines when using power tools.
The spacer discs in the Bosch GWS 22-230 H Professional grinder serve a specific purpose. They are used to create a gap between the grinding/cutting disc and the mounting flange. This gap allows for proper alignment and prevents the disc from rubbing against the protective guard or other parts. To use the spacer discs with the grinder, follow these steps: 1. After fitting the grinding/cutting disc, screw on the clamping nut and tighten it with the two-hole spanner. Ensure that the disc is securely fastened. 2. Check that the spacer discs are clean and free from any debris or damage. Place them on the mounting flange, ensuring that they are centered. 3. Carefully align the grinding/cutting disc with the spacer discs and the mounting flange. Make sure that the disc is properly seated and can turn freely. 4. Once the disc is aligned, tighten the clamping nut further to secure the disc in place. Use the two-hole spanner to ensure a tight fit. 5. Before switching on the power tool, double-check that the grinding/cutting disc is fitted correctly and can turn freely without any obstructions. Remember to always use the protective guard when working with the grinder and follow the safety instructions provided in the manual.
To attach and use the rubber sanding pad with the Bosch GWS 22-230 H Professional grinder, follow these steps: 1. Always fit the hand guard (part 15) when working with the rubber sanding pad (part 17). Refer to the fitting instructions in the graphics page of the manual. 2. Before fitting the rubber sanding pad, place the two spacer discs (part 16) on the grinding spindle (part 4). 3. Screw on the round nut (part 19) and tighten it using the two-pin spanner. 4. Ensure that the cup brush or disc brush is also fitted with the hand guard when working with them. Refer to the fitting instructions in the graphics page of the manual. 5. The cup brush or disc brush must be screwed onto the grinding spindle until it rests firmly against the grinding spindle flange at the end of the grinding spindle thread. Tighten it with an open-ended spanner. 6. If you want to change the abrasive tool easily without using additional tools, you can use the quick-clamping nut (part 11) instead of the clamping nut (part 9). Note that the quick-clamping nut is only for grinding or cutting discs. 7. To rotate the machine head, pull the plug out of the socket and unscrew the four screws. Carefully rotate the machine head into the desired position and retighten the screws. Remember to always follow the safety instructions and guidelines provided in the manual.
Yes, the manual of the Bosch GWS 22-230 H Professional is available in English .
Is your question not listed? Ask your question here
No results
Need help?
Do you have a question about the Bosch and is the answer not in the manual?
Question and answer
Number of questions: 0