View the manual for the Bosch GTS 254 Professional here, for free. This manual comes under the category saws and has been rated by 6 people with an average of a 9.2. This manual is available in the following languages: English. Do you have a question about the Bosch GTS 254 Professional or do you need help? Ask your question here
The Bosch GTS 254 Professional is a high-quality table saw used in various woodworking and construction applications. It features a powerful 1800-watt motor that delivers a maximum cutting capacity of 82 millimeters and a no-load speed of 3,650 revolutions per minute. The saw has a compact design that makes it easy to move around and set up on job sites. The blade adjusts easily for beveled cuts, allowing for more precise cutting. The blade can also be replaced quickly and easily, thanks to the saw's tool-free blade change feature. The Bosch GTS 254 Professional has a host of safety features, including soft start, restart protection, and overload protection, ensuring safer operation. The saw's dust extraction system helps keep the work area clean, helping to prevent respiratory issues. The saw also has a base made of high-quality aluminum and steel, making it sturdy and durable. The Bosch GTS 254 Professional is an outstanding choice for professionals and hobbyists who need a high-quality table saw that delivers precision, safety, and durability.
Can't find the answer to your question in the manual? You may find the answer to your question in the FAQs about the Bosch GTS 254 Professional below.
1. Wipe sawdust from the saw blade with a brush. 2. Spray the saw blade with oven cleaner and leave for 30 minutes. 3. Remove the oven cleaner and dirt with a dry cloth. 4. Grease saw blade with Vaseline.
If there is resin or other debris on the blade, it may look like the blade is blunt. If the saw blade has been thoroughly cleaned and is still blunt, it is recommended to have the saw blade sharpened.
1. Soak the rusty part in vinegar until completely soaked through. 2. Let the vinegar work on the rust for 24 hours. 3. Remove the rust with a wire brush or aluminium foil.
The maximum achievable charge level is expressed with 16V or 20V. The V in this case stands for Volt.
The amount of sound varies a lot per brand and type of saw, it is therefore wise to wear hearing protection to be sure.
To change the blade, first, unplug the tool for safety. Locate the blade lock mechanism on the side of the saw and engage it to lock the blade in place. Then, use a proper wrench to loosen the blade nut in the center of the arbor. Once loose, remove the nut and the old blade. Finally, place the new blade onto the arbor, ensuring it is properly aligned, and tighten the blade nut securely.
Adjusting the cutting depth is simple. Start by unplugging the tool to prevent any accidents. Locate the depth adjustment lever near the base of the saw. By moving the lever up or down, you can raise or lower the cutting depth. Make sure to set the desired depth before starting any cutting tasks.
If the blade is not spinning properly, first, turn off and unplug the saw. Check if there is any debris or material obstructing the blade's movement. Clear out any obstructions and ensure the blade can rotate freely. If the issue persists, there might be a problem with the motor or drive belt, in which case it is advisable to consult a professional for further assistance.
To align the miter gauge, start by unplugging the saw for safety. Place a square or a reliable straightedge against the miter gauge and the blade. Adjust the miter gauge until it aligns perfectly with the square or straightedge. Ensure it remains securely fastened to maintain accuracy during cuts.
Kickback can be dangerous, so it is important to take preventive measures. Firstly, make sure you have a firm grip on the tool and maintain proper control throughout the cut. Additionally, always use a sharp blade and the appropriate blade for the material you are cutting. Avoid forcing the blade and let it do the cutting at its own pace. Lastly, utilize a splitter or anti-kickback device whenever possible, as it helps prevent the workpiece from binding and causing kickback.
Yes, the manual of the Bosch GTS 254 Professional is available in English .
Is your question not listed? Ask your question here
No results
Need help?
Do you have a question about the Bosch and is the answer not in the manual?
Question and answer
Number of questions: 4HOW CAN I UNLOCK the Locking Lever of the vertical miter angle. I can't move it, it is hard.
My machine turns on, but I have to keep holding the button. If I remove my finger, it turns off.
Can you set the depth cut on the saw Bosch GTS 254
My saw table doesn't turn on.