View the manual for the Bosch GTS 10 XC Professional here, for free. This manual comes under the category saws and has been rated by 10 people with an average of a 8.3. This manual is available in the following languages: English. Do you have a question about the Bosch GTS 10 XC Professional or do you need help? Ask your question here




The Bosch GTS 10 XC Professional is a powerful and versatile saw designed for professional use. With an input power of 2100 W, this saw can handle various cutting tasks with ease. It operates at an idle speed of up to 3200 RPM, ensuring quick and efficient performance. The saw features a blade diameter of 254 mm and a blade bore of 30 mm, allowing for precise and accurate cuts. Equipped with a position indicator, this saw enables users to easily set and adjust the cutting depth according to their needs. Additionally, the double insulation design ensures safe operation by providing an extra layer of protection against electrical hazards. The saw runs on an AC input voltage of 230 V, making it compatible with standard power sources. Weighing 35000 g, this saw is relatively heavy, but its robust construction ensures durability and stability during operation. With a width of 759 mm and depth of 584 mm, the saw provides ample work surface area and accommodates various-sized materials. The Bosch GTS 10 XC Professional comes with a saw blade included, eliminating the need for separate purchases. Its power source is AC, allowing for consistent and reliable performance. The noise level of this saw is measured at 111 dB, which should be taken into consideration for users working in noise-sensitive environments. In summary, the Bosch GTS 10 XC Professional is a heavy-duty saw that combines power, precision, and safety features. It is well-suited for professional use, delivering consistent performance and durability over time.
| Brand | Bosch |
| Model | GTS 10 XC Professional | 0 601 B30 400 |
| Product | saw |
| EAN | 3165140509480 |
| Language | English |
| Filetype | User manual (PDF) |
| Input power | 2100 W |
| AC input voltage | 230 V |
| Power source | AC |
| Input power | 2100 W |
| AC input voltage | 230 V |
| Idle speed (max) | 3200 RPM |
| Blade diameter | 254 mm |
| Blade bore | 30 mm |
| Noise level | 111 dB |
| Position indicator | Yes |
| Noise level | 111 dB |
| Double insulated | Yes |
| Double insulated | Yes |
| Blade diameter | 254 mm |
| AC input voltage | 230 V |
| Maximum power | 2100 W |
| Product type | Benchtop tile saw |
| Idle speed | 3200 RPM |
| Bore size | 30 mm |
| Cutting height @ 90° | 79 mm |
| Sound power level | 98 dB |
| Sound pressure level | 111 dB |
| Sound level uncertainty | 3 dB |
| Weight | 35000 g |
| Width | 759 mm |
| Depth | 584 mm |
| Blade diameter | 254 mm |
| Weight | 35000 g |
| Width | 759 mm |
| Depth | 584 mm |
| Weight | 35000 g |
| Width | 635 mm |
| Depth | 768 mm |
| Table width | 640 mm |
| Table depth | 705 mm |
| Height | 343 mm |
| Saw blade included | Yes |
| Saw blade included | Yes |
| Position indicator | Yes |
Can't find the answer to your question in the manual? You may find the answer to your question in the FAQs about the Bosch GTS 10 XC Professional below.
The Bosch GTS 10 XC Professional has a weight of 35000 g.
1. Wipe sawdust from the saw blade with a brush. 2. Spray the saw blade with oven cleaner and leave for 30 minutes. 3. Remove the oven cleaner and dirt with a dry cloth. 4. Grease saw blade with Vaseline.
If there is resin or other debris on the blade, it may look like the blade is blunt. If the saw blade has been thoroughly cleaned and is still blunt, it is recommended to have the saw blade sharpened.
1. Soak the rusty part in vinegar until completely soaked through. 2. Let the vinegar work on the rust for 24 hours. 3. Remove the rust with a wire brush or aluminium foil.
The maximum achievable charge level is expressed with 16V or 20V. The V in this case stands for Volt.
The amount of sound varies a lot per brand and type of saw, it is therefore wise to wear hearing protection to be sure.
The Bosch GTS 10 XC Professional has a height of 343 mm.
The Bosch GTS 10 XC Professional has a width of 635 mm.
The Bosch GTS 10 XC Professional has a depth of 768 mm.
A possible cause could be misalignment of the blade. You can check and adjust the blade according to the user manual in order to ensure it is perfectly square to the table.
The cutting depth can be adjusted by using the depth adjustment feature on the Bosch GTS 10 XC Professional. Refer to the manual for the specific steps on how to set the desired cutting depth.
If you notice the motor overheating, it could be due to prolonged use or a heavy workload. Allow the saw to cool down for a while before continuing, and also ensure the ventilation openings are clear to facilitate proper air circulation.
There may be various reasons for the blade getting stuck, such as a dull blade or inadequate feed rate. Make sure to use a sharp blade suitable for the material you are cutting, and maintain a steady and proper feeding rate to prevent the blade from getting stuck.
To ensure accurate miter cuts, it is crucial to properly set the miter gauge and bevel angle according to the desired angle specified in the user manual. Additionally, securely clamp the workpiece and perform test cuts on scrap material before proceeding with your actual project.
Yes, the Bosch GTS 10 XC Professional has a position indicator. This feature allows users to easily track and adjust the position of their cuts, ensuring accurate and precise results.
Yes, the Bosch GTS 10 XC Professional is double insulated. This provides an extra layer of safety by reducing the risk of electric shock.
The maximum power of the Bosch GTS 10 XC Professional is 2100 W. This high power rating means that the saw can handle demanding cutting tasks with ease.
Yes, the Bosch GTS 10 XC Professional comes with a saw blade. This saves users the hassle of having to buy a separate blade and ensures they can start using the saw right away.
The noise level of the Bosch GTS 10 XC Professional is 111 dB. This is relatively high and users may want to consider wearing hearing protection when using the saw for extended periods of time.
Yes, the manual of the Bosch GTS 10 XC Professional is available in English .
Is your question not listed? Ask your question here
No results
Need help?
Do you have a question about the Bosch and is the answer not in the manual?
Question and answer
Number of questions: 2What can I do if the saw blade can no longer be raised with the crank?
This message has been automatically translatedQuali parti della macchina vanno lubrificate? Grazie