View the manual for the Bosch GTR 55-225 Professional here, for free. This manual comes under the category sanders and has been rated by 1 people with an average of a 7.5. This manual is available in the following languages: English. Do you have a question about the Bosch GTR 55-225 Professional or do you need help? Ask your question here




The Sanders Bosch GTR 55-225 Professional is a power tool designed for sanding tasks. With an input power of 550 W, it delivers sufficient power to tackle various sanding projects. Weighing in at 4800 g, it may be considered a slightly heavier option compared to other sanders on the market. This professional-grade sander operates at a sound pressure level of 84 dB, which is within a reasonable range for a power tool of this nature. Its sound power level is measured at 95 dB, ensuring that the user can hear the tool's operation clearly. The Bosch GTR 55-225 Professional is manufactured with top-quality materials to ensure durability and longevity. Its design incorporates features aimed at enhancing reliability during use. While additional specifications and features of the Bosch GTR 55-225 Professional are unavailable, this description provides an objective overview of the product. Please note that the information provided is based on the limited specifications given, and a more detailed description may be possible if additional information becomes available.
Can't find the answer to your question in the manual? You may find the answer to your question in the FAQs about the Bosch GTR 55-225 Professional below.
The maximum achievable charge level is expressed with 16V or 20V. The V in this case stands for Volt.
The Bosch GTR 55-225 Professional has a weight of 4800 g.
To adjust the speed of the sander, locate the variable speed dial usually situated near the handle or on top of the machine. By turning the dial clockwise, you can increase the speed, and by turning it counterclockwise, you can decrease the speed.
To replace the sanding belt, start by loosening the tension lever located on the side of the sander. This will relax the tension on the belt. Then, simply slide off the old belt and slip a new one onto the drum. Adjust the tension lever again to ensure the new belt is secured tightly.
To maintain the dust collection system, regularly check the dust bag or dust extraction port for any clogs or blockages. Clean the bag or port as necessary, and ensure it is properly attached to the sander. Additionally, empty the dust bag when it becomes full to ensure optimal performance.
To change the sanding drum, start by loosening the drum set screw usually located at the top of the drum. Once loosened, slide off the old drum and replace it with a new one of the desired size or grit. Tighten the drum set screw firmly to secure the new drum in place.
When operating the sander, always wear appropriate personal protective equipment such as safety goggles, a dust mask, and ear protection. Ensure that the workpiece is securely fastened or clamped down, and never force the sander onto the material. Regularly inspect the power cord for any damage and avoid exposing it to water or other liquids. Additionally, never leave the sander unattended while it is powered on.
The input power of the Bosch GTR 55-225 Professional is 550W, which is considered average among sanders in its category.
The sound pressure level of 84 dB for the Bosch GTR 55-225 Professional is relatively low, making it quieter and more user-friendly compared to many other sanders available in the market.
With a sound power level of 95 dB, the Bosch GTR 55-225 Professional scores slightly higher than average among sanders. It is important for users to wear appropriate hearing protection to minimize any potential impact on hearing.
Yes, the manual of the Bosch GTR 55-225 Professional is available in English .
Is your question not listed? Ask your question here
No results
Need help?
Do you have a question about the Bosch and is the answer not in the manual?
Question and answer
Number of questions: 0