View the manual for the Bosch GTM 12 JL here, for free. This manual comes under the category saws and has been rated by 11 people with an average of a 8.4. This manual is available in the following languages: English. Do you have a question about the Bosch GTM 12 JL or do you need help? Ask your question here




The Bosch GTM 12 JL saw is a powerful tool designed for precision cutting. With an input power of 1800W, it offers a high-performance cutting experience. The saw operates at an idle speed of 3800 RPM, allowing for efficient and quick cuts. Featuring a blade diameter of 305mm and a blade bore of 30mm, this saw is suitable for various cutting applications. The position indicator ensures accurate positioning, making it easier to achieve precise and consistent cuts. While the Bosch GTM 12 JL saw offers impressive performance, it is important to note that it produces a noise level of 104.5 dB, which may require appropriate hearing protection. Weighing 21,000g, this saw is quite heavy and may require additional support during operation. The saw has dimensions of 550mm in width, 660mm in depth, and 400mm in height, making it suitable for a range of workspaces. It includes a saw blade, enhancing convenience and value for users. The objective quality and durability of the Bosch GTM 12 JL saw are emphasized by its construction with premium materials. This ensures that the tool remains reliable and withstands regular use over an extended period of time. In summary, the Bosch GTM 12 JL saw offers high-powered performance and precision cutting capabilities. With its included saw blade and reliable construction, it is a reliable choice for professionals and enthusiasts seeking a durable and accurate saw for their cutting needs.
| Brand | Bosch |
| Model | GTM 12 JL | 0 601 B15 001 |
| Product | saw |
| EAN | 3165140695268 |
| Language | English |
| Filetype | User manual (PDF) |
| Input power | 1800 W |
| Input power | 1800 W |
| Power source | AC |
| AC input voltage | 220 - 240 V |
| Idle speed (max) | 3800 RPM |
| Blade diameter | 305 mm |
| Blade bore | 30 mm |
| Idle speed (max) | 3800 RPM |
| Miter setting (left) | 48 ° |
| Miter setting (right) | 48 ° |
| Bevel setting (left) | 47 ° |
| Bevel setting (right) | 2 ° |
| Cross cut capacity (0° x 0°) | 95 x 150 mm |
| Miter cut capacity (45° x 0°) | 95 x 90 mm |
| Sound power level | 104.5 dB |
| Sound pressure level | 91 dB |
| Sound level uncertainty | 3 dB |
| Vibration level uncertainty | 1.5 m/s² |
| Vibration level | 3.4 m/s² |
| Position indicator | Yes |
| Noise level | 104.5 dB |
| Cutting capacity 0° | 95 x 150 mm |
| Cutting capacity 45° miter | 95 x 90 mm |
| Power consumption (typical) | 1800 W |
| Weight | 21000 g |
| Width | 550 mm |
| Depth | 660 mm |
| Height | 400 mm |
| Weight | 21000 g |
| Width | 550 mm |
| Depth | 660 mm |
| Height | 400 mm |
| Package width | 604 mm |
| Package depth | 707 mm |
| Package height | 462 mm |
| Saw blade included | Yes |
| Blade diameter | 305 mm |
| Saw blade included | Yes |
| Blade bore | 30 mm |
| Input power | 1800 W |
| Noise level | 104.5 dB |
| Weight | 21000 g |
| Width | 550 mm |
| Depth | 660 mm |
| Height | 400 mm |
| Sliding rails | - |
| Bevel type | - |
| Laser guide | Yes |
| Spindle lock | Yes |
| Soft start | Yes |
| Table saw mode | Yes |
Can't find the answer to your question in the manual? You may find the answer to your question in the FAQs about the Bosch GTM 12 JL below.
The Bosch GTM 12 JL has a weight of 21000 g.
1. Wipe sawdust from the saw blade with a brush. 2. Spray the saw blade with oven cleaner and leave for 30 minutes. 3. Remove the oven cleaner and dirt with a dry cloth. 4. Grease saw blade with Vaseline.
If there is resin or other debris on the blade, it may look like the blade is blunt. If the saw blade has been thoroughly cleaned and is still blunt, it is recommended to have the saw blade sharpened.
1. Soak the rusty part in vinegar until completely soaked through. 2. Let the vinegar work on the rust for 24 hours. 3. Remove the rust with a wire brush or aluminium foil.
The maximum achievable charge level is expressed with 16V or 20V. The V in this case stands for Volt.
The amount of sound varies a lot per brand and type of saw, it is therefore wise to wear hearing protection to be sure.
The Bosch GTM 12 JL has a height of 400 mm.
The Bosch GTM 12 JL has a width of 550 mm.
The Bosch GTM 12 JL has a depth of 660 mm.
Simply locate the depth adjustment knob located on the side of the saw. Rotate it clockwise to increase the cutting depth or counterclockwise to decrease it until the desired depth is achieved.
The Bosch GTM 12 JL has a maximum cutting capacity of 83 millimeters for straight cuts and 45 millimeters for bevel cuts.
Start by disconnecting the power source. Then, locate the spindle lock button located on the side of the saw near the blade. Depress the button to lock the spindle, and use a wrench to loosen the bolt holding the blade. Replace the blade with a new one and tighten the bolt securely.
Absolutely! The Bosch GTM 12 JL is equipped with a miter gauge that allows you to make precise angle cuts. Simply loosen the locking knob, adjust the angle to your desired position, and tighten the knob to secure the gauge in place.
Always wear appropriate personal protective equipment, such as safety goggles and ear protection, when operating the saw. Additionally, ensure the workpiece is securely clamped before making any cuts. Start the saw at its lowest speed setting and gradually increase it as needed. Finally, never reach over the blade or make any adjustments while the saw is in motion.
Yes, the Bosch GTM 12 JL has a position indicator. This is a useful feature that allows users to accurately measure and adjust the position of the saw blade, ensuring precise cuts.
Yes, a saw blade is included with the Bosch GTM 12 JL. This saves the user from having to purchase a separate blade and makes the saw ready to use out of the box.
The idle speed (max) of the Bosch GTM 12 JL is 3800 RPM. This high speed allows for fast and efficient cutting, making it ideal for projects that require quick and precise cuts.
The noise level of the Bosch GTM 12 JL is 104.5 dB. This is relatively high compared to some other saws, so users should be aware of the potential noise level and take appropriate measures to protect their hearing.
The bevel setting (right) of the Bosch GTM 12 JL is 2°. This means that the saw can be tilted to the right at a maximum angle of 2°, allowing for precise bevel cuts in that direction.
Yes, the manual of the Bosch GTM 12 JL is available in English .
Is your question not listed? Ask your question here
No results
Need help?
Do you have a question about the Bosch and is the answer not in the manual?
Question and answer
Number of questions: 4It is very difficult to feed the material through the saw during splitting. It gets wedged between the side piece for width adjustment and the blade. It looks like the small pointed guide plate right behind the blade. Can that guide plate be adjusted? It doesn't seem to align perfectly with the blade, appears to be slightly raised from the saw table.
How do you unlock the GTM 12 JL miter saw when the arm is lowered and the red plastic piece is not positioned underneath?
This message has been automatically translatedOnce u have undone the saw blade how do u remove it past the guards etc
Βάζω την ασφάλεια για κόψω από πάνω αλλά δεν κατεβαίνει η βάση