View the manual for the Bosch GST 90 E Professional here, for free. This manual comes under the category saws and has been rated by 1 people with an average of a 9.6. This manual is available in the following languages: English. Do you have a question about the Bosch GST 90 E Professional or do you need help? Ask your question here

The Bosch GST 90 E Professional saw is a versatile power tool designed for efficient cutting in various materials. With a stroke length of 26 millimeters and an input power of 350 watts, this saw delivers precise and controlled cutting performance. Operating at a no-load stroke rate of 3100 strokes per minute, the Bosch GST 90 E Professional allows for fast and efficient cutting. The 2.5-meter long cable provides ample reach for easy maneuverability, and the AC input voltage of 230 volts ensures consistent power supply. The cutting depth of the Bosch GST 90 E Professional is impressive, with a maximum depth of 90 millimeters in wood, 20 millimeters in aluminum, and 10 millimeters in non-alloyed steel. This makes it suitable for a variety of cutting tasks. Equipped with dust extraction capabilities, this saw helps keep the work area clean and free from debris. The orbital action feature adds versatility, allowing for both straight and curved cuts. Weighing 2300 grams, the Bosch GST 90 E Professional is relatively lightweight, making it easy to handle and maneuver during prolonged use. The power source for this saw is AC, making it convenient for use with standard electrical outlets. With its robust construction and high-quality materials, the Bosch GST 90 E Professional ensures reliability and durability over time. Whether you are a professional tradesperson or a DIY enthusiast, this saw is designed to meet your cutting needs with precision and efficiency.
| Brand | Bosch |
| Model | GST 90 E Professional | 0 601 58G 002 |
| Product | saw |
| EAN | 3165140659215 |
| Language | English |
| Filetype | User manual (PDF) |
| Stroke length | 26 mm |
| Cutting depth in wood | 90 mm |
| Cutting depth in aluminum | 20 mm |
| Cutting depth in non-alloyed steel | 10 mm |
| Input power | 350 W |
| Cable length | 2.5 m |
| AC input voltage | 230 V |
| Power source | AC |
| No-load stroke rate | 3100 spm |
| Dust extraction | Yes |
| Orbital action | Yes |
| Product color | Black, Green, Silver |
| Weight | 2300 g |
Can't find the answer to your question in the manual? You may find the answer to your question in the FAQs about the Bosch GST 90 E Professional below.
The Bosch GST 90 E Professional has a weight of 2300 g.
1. Wipe sawdust from the saw blade with a brush. 2. Spray the saw blade with oven cleaner and leave for 30 minutes. 3. Remove the oven cleaner and dirt with a dry cloth. 4. Grease saw blade with Vaseline.
If there is resin or other debris on the blade, it may look like the blade is blunt. If the saw blade has been thoroughly cleaned and is still blunt, it is recommended to have the saw blade sharpened.
1. Soak the rusty part in vinegar until completely soaked through. 2. Let the vinegar work on the rust for 24 hours. 3. Remove the rust with a wire brush or aluminium foil.
The maximum achievable charge level is expressed with 16V or 20V. The V in this case stands for Volt.
The amount of sound varies a lot per brand and type of saw, it is therefore wise to wear hearing protection to be sure.
Incorrect blade installation or a dull blade could be causing the issue. Ensure the blade is mounted securely and consider replacing it if it is dull.
Use the bevel adjustment function located on the base plate to adjust the cutting angle according to your requirements.
Excessive vibration may be due to a loose blade, incorrect blade type, or worn-out components. Double-check the blade installation, ensure you are using the appropriate blade for the material, and inspect the machine for any signs of wear.
Overheating could be caused by prolonged use or insufficient ventilation. Allow the saw to rest and cool down, ensuring proper airflow around the machine. If the issue persists, check if the saw's cooling vents are blocked and clear any obstructions.
When the carbon brushes wear out, they need to be replaced. Consult the manufacturer's instructions for the specific procedure on replacing the carbon brushes in the motor, as it involves accessing internal components of the tool.
The input power of the Bosch GST 90 E Professional is 350 W. This means it has a relatively lower power output compared to some other saws on the market.
The no-load stroke rate of the Bosch GST 90 E Professional is 3100 spm. This indicates that it has a high cutting speed, allowing for efficient and fast cutting.
Yes, the Bosch GST 90 E Professional does have dust extraction. This feature helps keep the work area clean and improves visibility during cutting.
Yes, the Bosch GST 90 E Professional does have orbital action. This feature allows for more aggressive cutting and improved efficiency when working on various materials.
The AC input voltage of the Bosch GST 90 E Professional is 230 V, and its power source is AC. This means it can be easily connected to a standard power outlet for convenient use.
Yes, the manual of the Bosch GST 90 E Professional is available in English .
Is your question not listed? Ask your question here
No results
Need help?
Do you have a question about the Bosch and is the answer not in the manual?
Question and answer
Number of questions: 0