View the manual for the Bosch GST 85 PE here, for free. This manual comes under the category saws and has been rated by 14 people with an average of a 8.4. This manual is available in the following languages: English. Do you have a question about the Bosch GST 85 PE or do you need help? Ask your question here

The Bosch GST 85 PE is a power tool used for cutting various materials. With an input power of 580 W and an output power of 350 W, this saw delivers sufficient power for efficient cutting tasks. The saw has a no-load stroke rate of 3100 strokes per minute, allowing for quick and precise cutting movements. Equipped with a 4-meter long cable, the Bosch GST 85 PE provides ample flexibility and reach during operation. Its stroke height measures 26 mm, enabling the saw to make deep and accurate cuts. In wood, it offers a cutting depth of up to 85 mm, while it can handle cutting depths of 20 mm in aluminum and 10 mm in non-alloyed steel. Weighing 2400 g, this saw is relatively lightweight, ensuring easy maneuverability and reduced operator fatigue. Utilizing an AC power source, it offers a reliable and consistent power supply for uninterrupted operation. Overall, the Bosch GST 85 PE is a versatile and powerful tool suitable for a range of cutting applications. Its high stroke rate and ample cutting depths make it well-suited for various materials, including wood, aluminum, and non-alloyed steel. The long cable provides convenience and flexibility during operation, while its relatively lightweight design allows for comfortable use. With its reliable power source, this saw ensures consistent performance.
| Brand | Bosch |
| Model | GST 85 PE | 0 601 584 660 |
| Product | saw |
| EAN | 3165140076944 |
| Language | English |
| Filetype | User manual (PDF) |
| Input power | 580 W |
| Output power | 350 W |
| Cable length | 4 m |
| Power source | AC |
| No-load stroke rate | 3100 spm |
| Stroke height | 26 mm |
| Cutting depth in wood | 85 mm |
| Cutting depth in aluminum | 20 mm |
| Cutting depth in non-alloyed steel | 10 mm |
| Weight | 2400 g |
Can't find the answer to your question in the manual? You may find the answer to your question in the FAQs about the Bosch GST 85 PE below.
The Bosch GST 85 PE has a weight of 2400 g.
1. Wipe sawdust from the saw blade with a brush. 2. Spray the saw blade with oven cleaner and leave for 30 minutes. 3. Remove the oven cleaner and dirt with a dry cloth. 4. Grease saw blade with Vaseline.
If there is resin or other debris on the blade, it may look like the blade is blunt. If the saw blade has been thoroughly cleaned and is still blunt, it is recommended to have the saw blade sharpened.
1. Soak the rusty part in vinegar until completely soaked through. 2. Let the vinegar work on the rust for 24 hours. 3. Remove the rust with a wire brush or aluminium foil.
The maximum achievable charge level is expressed with 16V or 20V. The V in this case stands for Volt.
The amount of sound varies a lot per brand and type of saw, it is therefore wise to wear hearing protection to be sure.
To change the saw blade on your Bosch GST 85 PE, locate the blade release lever near the blade guard. Depress the lever and carefully remove the old blade. Insert the new blade into the saw, making sure it is securely in place, and release the blade release lever.
The maximum cutting depth of the Bosch GST 85 PE is 85 millimeters when using a standard blade.
To adjust the cutting angle on your Bosch GST 85 PE, loosen the angle adjustment lever located near the base of the saw. Tilt the saw to the desired angle and tighten the lever to lock it in place.
To connect the Bosch GST 85 PE to a dust extraction system, you will need to locate the dust extraction port on the saw. Attach the appropriate dust extraction hose or adapter to the port, ensuring a secure and airtight connection.
The Bosch GST 85 PE does not have adjustable speed or settings. It operates at a fixed speed suitable for most cutting tasks.
The input power of Bosch GST 85 PE is 580 Watts. This is a relatively high input power, which means it is capable of handling heavy-duty cutting tasks.
The output power of Bosch GST 85 PE is 350 Watts. This is lower than the input power, which suggests there may be some power loss during operation.
The no-load stroke rate of Bosch GST 85 PE is 3100 strokes per minute. This is a high stroke rate, indicating that the saw can make quick and efficient cuts.
The stroke height of Bosch GST 85 PE is 26 millimeters. This is a moderate stroke height, suitable for various cutting applications.
The power source of Bosch GST 85 PE is AC. This means it can be easily connected to a standard electrical outlet, providing continuous power for extended use.
Yes, the manual of the Bosch GST 85 PE is available in English .
Is your question not listed? Ask your question here
No results
Need help?
Do you have a question about the Bosch and is the answer not in the manual?
Question and answer
Number of questions: 0