View the manual for the Bosch GSS 140 A Professional here, for free. This manual comes under the category sanders and has been rated by 1 people with an average of a 7.1. This manual is available in the following languages: English. Do you have a question about the Bosch GSS 140 A Professional or do you need help? Ask your question here

| Brand | Bosch |
| Model | GSS 140 A Professional | 0 601 297 087 |
| Product | sanders |
| EAN | 3165140337861, 3165140337878 |
| Language | English |
| Filetype | User manual (PDF) |
| Weight | 1400 g |
| Sanding plate size (WxD) | 113 x 105 mm |
| Sanding sheet size (velcro) | 115 x 107 mm |
| Sanding sheet size (clamp) | 115 x 140 mm |
| Type of sander | Orbital sander |
| Output power | 180 W |
| Power source | AC |
| Idle speed (max) | 12000 RPM |
| Oscillating orbit diameter | 1.6 mm |
| Idle oscillation rate (max) | 24000 OPM |
| Eccentricity | 0.8 mm |
| 24000 |
Can't find the answer to your question in the manual? You may find the answer to your question in the FAQs about the Bosch GSS 140 A Professional below.
The maximum achievable charge level is expressed with 16V or 20V. The V in this case stands for Volt.
The Bosch GSS 140 A Professional has a weight of 1400 g.
The output power of the Bosch GSS 140 A Professional is 180 Watts. This means that it has a relatively high power output compared to other sanders in its class, allowing for efficient and effective sanding.
The sanding plate size of the Bosch GSS 140 A Professional is 113 x 105 mm. This provides a decent surface area for sanding, allowing for faster and more consistent results.
The maximum idle speed of the Bosch GSS 140 A Professional is 12000 RPM. This high speed allows for fast material removal, making it ideal for tackling tough sanding tasks.
The power source of the Bosch GSS 140 A Professional is AC. This means that it needs to be plugged into a power outlet to operate, providing a consistent source of power for continuous sanding.
The eccentricity of the Bosch GSS 140 A Professional is 0.8 mm. This small eccentricity provides a fine and smooth sanding motion, resulting in a high-quality finish on the workpiece.
To properly change the sanding sheet on the Bosch GSS 140 A Professional sander, follow these steps: 1. Remove dirt and dust from the sanding plate with a brush before attaching a new sanding sheet. 2. Ensure that the punched holes in the sanding sheet align with the drilled holes in the sanding plate for optimum dust extraction. 3. For sanding sheets with hook-and-loop backing, tap the hook-and-loop fastening of the sanding plate before fitting the sanding sheet to ensure maximum adhesion. 4. Position the sanding sheet flush with one side of the sanding plate, then press it on firmly. 5. To remove the sanding sheet, take hold of it by an edge and pull it away from the sanding plate. For sanding sheets without hook-and-loop backing: 1. Press and hold down the release button. 2. Guide the sanding sheet underneath the open front clamping bracket to the stop and release the button. 3. Press the clamp inwards and swing it to the stop. 4. Position the sanding sheet tightly around the sanding plate and guide the other end between the rear clamping bracket and the red roller on the clamp. 5. Hold the sanding sheet tensioned and push the clamp towards the sanding plate to lock it in place.
To troubleshoot the dust extraction system on the Bosch GSS 140 A Professional sander, follow these steps: 1. Knock the dust box against a firm surface to loosen the dust from the filter element. 2. Fold the filter element out of the way and empty the dust box using a soft brush to clean the flaps of the filter element. 3. Attach the dust extraction adapter to the extraction outlet, ensuring the locking levers lock into place. 4. Connect a dust extraction hose with a diameter of 19 millimeters to the dust extraction adapter. 5. Ensure proper ventilation at the workplace and wear a P2 filter class breathing mask for safety. 6. Avoid dust accumulation to prevent potential hazards. 7. If using self-generated dust extraction with a dust box, place the dust box onto the extraction outlet until it clicks into place. 8. To empty the dust box, press the locking lever on the side and remove it by pulling downwards.
Yes, the manual of the Bosch GSS 140 A Professional is available in English .
Is your question not listed? Ask your question here
No results
Need help?
Do you have a question about the Bosch and is the answer not in the manual?
Question and answer
Number of questions: 0