Bosch GSR 12-2 Professional manual

Bosch GSR 12-2 Professional
8.4 · 7
PDF manual
 · 85 pages
English
manualBosch GSR 12-2 Professional
Robert Bosch Power Tools GmbH
70538 Stuttgart
GERMANY
www.bosch-pt.com
1 609 92A 35F (2014.11) I / 86 WEU

WEU WEU

GSR Professional

9,6-2 | 12-2 | 14,4-2 | 18-2

de Originalbetriebsanleitung
en Original instructions
fr Notice originale
es Manual original
pt Manual original
it Istruzioni originali
nl Oorspronkelijke
gebruiksaanwijzing
da Original brugsanvisning
sv Bruksanvisning i original
no Original driftsinstruks
fi Alkuperäiset ohjeet
el Πρωτότυπο οδηγιών χρήσης
tr Orijinal işletme talimatı
ar
fa
ςТЎϩХʉ ЌТϾϦφЍʉ ʌμВТЎϺυ
ΖЎϩʉ ˒μВЖЙʉʓ ИͳϞφЁʑ
OBJ_BUCH-585-006.book Page 1 Monday, October 10, 2016 11:21 AM

View the manual for the Bosch GSR 12-2 Professional here, for free. This manual comes under the category drill machines and has been rated by 7 people with an average of a 8.4. This manual is available in the following languages: English. Do you have a question about the Bosch GSR 12-2 Professional or do you need help? Ask your question here

Need help?

Do you have a question about the Bosch and is the answer not in the manual?

  • Receive updates on solutions
  • Get answers to your question

Question and answer

Number of questions: 1
A
ANTO ROBIN May 16, 2024

Can I get this machine battery

General
BrandBosch
ModelGSR 12-2 Professional | 0 601 918 J04
Productdrill machine
EAN3165140453462
LanguageEnglish
FiletypeUser manual (PDF)
Features
Soft gripYes
ReverseYes
Drilling, Screwdriving
Chuck typeKeyless
Product designPistol grip drill
DrillingYes
ScrewdrivingYes
Performance
Torque settings26
Maximum torque (soft applications)11 N⋅m
Number of gears2
Idle speed (1st gear)400 RPM
Idle speed (2nd gear)1200 RPM
Screw diameter (max)7 mm
Drilling diameter in wood (max)23 mm
Drilling diameter in steel (max)12 mm
Maximum torque (hard applications)27 N⋅m
Other features
Vibration emission2.5 m/s²
Technical details
Product colorBlack, Blue, Red
Packaging content
Battery charger includedYes
Number of batteries included3 pc(s)
Carrying caseYes
Battery includedYes
Power
Charging time60 min
Power sourceBattery
Battery technologyNickel-Cadmium (NiCd)
Battery voltage12 V
Battery capacity1.5 Ah
show more

Can't find the answer to your question in the manual? You may find the answer to your question in the FAQs about the Bosch GSR 12-2 Professional below.

How do I remove rust from my Bosch drill machine?

1. Soak the rusty part in vinegar until completely soaked through. 2. Let the vinegar work on the rust for 24 hours. 3. Remove the rust with a wire brush or aluminium foil.

What does '16V' or '20V' mean?

The maximum achievable charge level is expressed with 16V or 20V. The V in this case stands for Volt.

Do I have to wear hearing protection when using a drill machine?

The amount of sound varies a lot per brand and type of drill machine, it is therefore wise to wear hearing protection to be sure.

Does the Bosch GSR 12-2 Professional have a soft grip?

Yes, the Bosch GSR 12-2 Professional has a soft grip. This means that the user will have a comfortable and secure grip while using the drill machine.

How many torque settings does the Bosch GSR 12-2 Professional have?

The Bosch GSR 12-2 Professional has 26 torque settings. This allows the user to easily adjust the torque for different applications.

What is the maximum torque for soft applications of the Bosch GSR 12-2 Professional?

The maximum torque for soft applications of the Bosch GSR 12-2 Professional is 11 N⋅m. This means that the drill machine can generate a high amount of torque for various tasks.

Can the Bosch GSR 12-2 Professional reverse its direction?

Yes, the Bosch GSR 12-2 Professional can reverse its direction. This feature allows the user to easily remove screws or back out drill bits.

What is the vibration emission of the Bosch GSR 12-2 Professional?

The vibration emission of the Bosch GSR 12-2 Professional is 2.5 m/s². This is a relatively low level of vibration, which means that the drill machine provides a smooth and comfortable operation for the user.

How do I change the drill bit on the Bosch GSR 12-2 Professional drill machine?

To change the drill bit on the Bosch GSR 12-2 Professional drill machine, follow these steps: 1. Ensure that the drill machine is turned off and the battery is removed for safety. 2. Locate the keyless chuck at the front of the drill machine. The keyless chuck is the part that holds the drill bit. 3. Hold the drill machine with one hand and use your other hand to grasp the chuck sleeve, which is the part closest to the drill bit. 4. Rotate the chuck sleeve counterclockwise to loosen it. You may need to apply some force, but be careful not to overtighten or damage the chuck. 5. Once the chuck sleeve is loose, you can remove the current drill bit by pulling it straight out of the chuck. 6. Select the desired drill bit for your application and insert it into the chuck, making sure it is aligned with the jaws of the chuck. 7. Hold the drill machine firmly and rotate the chuck sleeve clockwise to tighten it. Again, apply enough force to secure the drill bit, but avoid overtightening. 8. Check that the drill bit is securely held in place by giving it a gentle tug. 9. Reinsert the battery into the drill machine if it was removed earlier. 10. Your Bosch GSR 12-2 Professional drill machine is now ready for use with the new drill bit. Remember to always follow safety precautions and refer to the manual for specific instructions and guidelines.

Why is the drill machine not turning on when I press the on/off switch?

To troubleshoot why the Bosch GSR 12-2 Professional drill machine is not turning on when you press the on/off switch, follow these steps: 1. Check the battery: Ensure that the battery is fully charged and properly inserted into the handle of the drill machine. If the battery is low or not inserted correctly, the drill machine may not turn on. 2. Verify the rotational direction switch: Set the rotational direction switch to the center position to avoid unintentional starting. Make sure it is not in a position that prevents the drill machine from turning on. 3. Inspect the on/off switch: Press and hold the on/off switch firmly to start the machine. If the switch is not responding, check if it is damaged or stuck. Clean the switch if there is any debris or dirt obstructing its operation. 4. Check for any safety features: Some drill machines have additional safety features, such as a lock button or a safety interlock system. Ensure that these features are not engaged or activated, as they may prevent the drill machine from turning on. 5. Seek professional assistance: If the drill machine still does not turn on after following the above steps, it is recommended to contact an authorized service center or Bosch customer support for further assistance and troubleshooting. Remember to always prioritize safety and refer to the manual for specific instructions and guidelines.

How do I adjust the torque preselection on the Bosch GSR 12-2 Professional drill machine?

To adjust the torque preselection on the Bosch GSR 12-2 Professional drill machine, follow these steps: 1. Locate the torque preselection ring on the drill machine. It is usually located near the chuck or the handle. 2. Rotate the torque preselection ring to select the desired torque level. The ring may have numbers or symbols indicating different torque settings. 3. Choose the appropriate torque level based on the type of material you are working with and the size of the screws or bolts. 4. For drilling applications, set the torque preselection ring to a higher level to allow for more power. 5. For screwdriving applications, set the torque preselection ring to a lower level to prevent overtightening or stripping of screws. 6. Ensure that the torque preselection ring is securely set in the desired position before starting your drilling or screwdriving task. 7. Test the torque setting by performing a test drill or screwdriving operation. Adjust the torque level if necessary to achieve the desired result. Remember to refer to the manual for specific instructions and guidelines, as different models may have slight variations in the torque preselection mechanism.

Why is the drill machine making excessive noise or vibrations during operation?

Excessive noise or vibrations during operation of the Bosch GSR 12-2 Professional drill machine can be caused by various factors. Here are the steps to address this issue: 1. Check the drill bit: Ensure that the drill bit is securely inserted into the chuck and is not damaged or worn. A loose or damaged drill bit can cause vibrations and noise during operation. 2. Verify the material being drilled: Different materials require different drilling techniques. Ensure that you are using the appropriate drill bit and drilling technique for the specific material you are working with. Using the wrong drill bit or incorrect drilling technique can result in excessive noise and vibrations. 3. Check the workpiece stability: Ensure that the workpiece is securely clamped or held in place. If the workpiece is not stable, it can cause vibrations and noise when drilling. 4. Inspect the drill machine components: Check for any loose or damaged parts, such as the chuck, handle, or motor housing. Tighten any loose components and replace any damaged parts as necessary. 5. Consider the speed and pressure: Adjust the drilling speed and apply consistent pressure while drilling. Using excessive speed or applying too much pressure can lead to increased noise and vibrations. 6. Seek professional assistance: If the issue persists or if you are unsure about the cause of the excessive noise or vibrations, it is recommended to contact an authorized service center or Bosch customer support for further assistance and troubleshooting. Remember to prioritize safety and refer to the manual for specific instructions and guidelines.

What is the maximum drilling diameter and maximum screw diameter that the Bosch GSR 12-2 Professional drill machine can handle?

The maximum drilling diameter and maximum screw diameter that the Bosch GSR 12-2 Professional drill machine can handle are specified in the manual. According to the manual, the maximum drilling diameter in the first gear is 10 mm for steel and 20 mm for wood. In the second gear, the maximum drilling diameter is 13 mm for steel and 26 mm for wood. The maximum screw diameter is 6 mm. Please note that these specifications may vary depending on the specific model and accessories used. It is always recommended to refer to the manual for accurate and detailed information regarding the maximum drilling and screwing capacities of the Bosch GSR 12-2 Professional drill machine. The manual is available in multiple languages, including English, Dutch, German, French, Spanish, Italian, Swedish, Portuguese, Danish, Norwegian, Finnish, Turkish, Modern Greek, and Arabic.

Is the manual of the Bosch GSR 12-2 Professional available in English?

Yes, the manual of the Bosch GSR 12-2 Professional is available in English .

Is your question not listed? Ask your question here

No results