View the manual for the Bosch GSR 10,8-2-LI Professional here, for free. This manual comes under the category drill machines and has been rated by 1 people with an average of a 9.9. This manual is available in the following languages: English. Do you have a question about the Bosch GSR 10,8-2-LI Professional or do you need help? Ask your question here


| Brand | Bosch |
| Model | GSR 10,8-2-LI Professional | 0 601 868 109 |
| Product | drill machine |
| EAN | 3165140815864 |
| Language | English |
| Filetype | User manual (PDF) |
| Soft grip | Yes |
| Reverse | Yes |
| Drilling, Screwdriving | |
| Product design | Pistol grip drill |
| Built-in light | Yes |
| Drilling | Yes |
| Screwdriving | Yes |
| Torque settings | 21 |
| Maximum torque (soft applications) | 15 N⋅m |
| Number of gears | 2 |
| Chuck capacity (min) | 1 mm |
| Chuck capacity (max) | 10 mm |
| Idle speed (1st gear) | 400 RPM |
| Idle speed (2nd gear) | 1300 RPM |
| Screw diameter (max) | 7 mm |
| Drilling diameter in wood (max) | 19 mm |
| Drilling diameter in steel (max) | 10 mm |
| Maximum torque (hard applications) | 30 N⋅m |
| Product color | Black, Blue |
| Electronic Cell Protection (ECP) | Yes |
| Battery level indicator | Yes |
| Power source | Battery |
| Battery technology | Lithium-Ion (Li-Ion) |
| Battery voltage | 10.8 V |
| Battery capacity | 2 Ah |
| Width | 169 mm |
| Height | 178 mm |
| Weight | 950 g |
| Carrying case | No |
| Battery included | No |
Can't find the answer to your question in the manual? You may find the answer to your question in the FAQs about the Bosch GSR 10,8-2-LI Professional below.
1. Soak the rusty part in vinegar until completely soaked through. 2. Let the vinegar work on the rust for 24 hours. 3. Remove the rust with a wire brush or aluminium foil.
The maximum achievable charge level is expressed with 16V or 20V. The V in this case stands for Volt.
The amount of sound varies a lot per brand and type of drill machine, it is therefore wise to wear hearing protection to be sure.
The Bosch GSR 10,8-2-LI Professional has a weight of 950 g.
The Bosch GSR 10,8-2-LI Professional has a height of 178 mm.
The Bosch GSR 10,8-2-LI Professional has a width of 169 mm.
Yes, the Bosch GSR 10,8-2-LI Professional has a soft grip. This provides added comfort and stability for the user during drilling tasks.
The Bosch GSR 10,8-2-LI Professional has 21 torque settings. This allows for precise control and adjustment depending on the application.
Yes, the Bosch GSR 10,8-2-LI Professional has a reverse function. This is useful for removing screws or backing out of holes.
Yes, the Bosch GSR 10,8-2-LI Professional has a battery level indicator. This helps the user monitor the remaining power and plan their work accordingly.
The Bosch GSR 10,8-2-LI Professional has 2 gears. This allows for different speeds and drilling power depending on the task at hand.
To determine if you can use the Bosch GSR 10,8-2-LI Professional drill machine for a specific task, follow these steps: 1. Identify the type of task you want to perform. Determine if it involves driving screws or drilling in wood, metal, ceramic, or plastic. 2. Check the product features and specifications of the Bosch GSR 10,8-2-LI Professional drill machine. Ensure that it is suitable for the task based on its capabilities. Look for information such as the maximum torque, maximum drilling diameter, and recommended materials. 3. Consider the power source. The Bosch GSR 10,8-2-LI Professional drill machine is a cordless drill/driver that uses a rechargeable battery. Ensure that the battery is fully charged and capable of providing sufficient power for the task. 4. Take into account the size and weight of the drill machine. If the task requires working in tight spaces or overhead, ensure that the Bosch GSR 10,8-2-LI Professional drill machine is compact and lightweight enough to maneuver comfortably. 5. Refer to the safety guidelines provided in the manual. Ensure that you follow all safety precautions and use appropriate personal protective equipment for the specific task. By following these steps, you can determine if the Bosch GSR 10,8-2-LI Professional drill machine is suitable for your specific task.
If the Bosch GSR 10,8-2-LI Professional drill machine is not providing enough power to drive screws or drill holes, you can try the following steps: 1. Check the gear selector switch (3) on the drill machine. Ensure that it is set to the appropriate gear for the task. The first gear is suitable for working with small drilling diameters, while the second gear is for higher speed range tasks. 2. Make sure the battery (5) is fully charged. If the battery is low on power, it may not provide enough power for the drill machine. Use the recommended charger listed in the technical data to charge the battery. 3. Adjust the speed of the drill machine. Press the on/off switch (7) to varying extents to adjust the rotational speed. Light pressure on the switch results in a low rotational speed, while increased pressure increases the speed. 4. Check the torque presetting ring (2) on the drill machine. Ensure that it is set to the appropriate torque level for the task. Adjusting the torque can help optimize the power output for different applications. 5. If the issue persists, consider using a different drill bit or screwdriver bit. Using a worn or incorrect bit can affect the performance of the drill machine. Ensure that the bit is securely inserted into the keyless chuck (1). By following these steps, you can troubleshoot and address the issue of the Bosch GSR 10,8-2-LI Professional drill machine not providing enough power for driving screws or drilling holes.
To reduce the noise and vibration levels while using the Bosch GSR 10,8-2-LI Professional drill machine, follow these steps: 1. Use the drill machine at the appropriate speed for the task. Adjust the rotational speed by applying varying pressure on the on/off switch. Light pressure results in a lower rotational speed, which can help reduce noise and vibration. 2. Ensure that the drill machine is properly maintained. Regularly clean the chuck and remove any debris or dust that may affect the performance and increase noise levels. 3. Use sharp and high-quality drill bits or screwdriver bits. Dull or worn-out bits can cause the drill machine to work harder, leading to increased noise and vibration. Replace the bits when necessary. 4. Apply consistent and steady pressure while drilling or driving screws. Avoid excessive force or pushing, as it can increase vibration and noise levels. Let the drill machine do the work at its own pace. 5. Consider using additional accessories or attachments to dampen vibrations. Some accessories, such as auxiliary handles or anti-vibration gloves, can help reduce the transmission of vibrations to your hands and arms. By following these steps, you can minimize the noise and vibration levels while using the Bosch GSR 10,8-2-LI Professional drill machine, providing a more comfortable and efficient drilling experience.
If the Bosch GSR 10,8-2-LI Professional drill machine is not assembling properly, you can check the following: 1. Ensure that all components are present and undamaged. Check if you have all the necessary parts, including the chuck, battery, and accessories. Inspect them for any signs of damage or wear. 2. Verify that you are correctly aligning the components. Follow the assembly instructions provided in the manual, ensuring that each part is properly aligned and inserted into its designated position. 3. Check the locking mechanisms. Ensure that any locking mechanisms, such as the chuck lock or battery lock, are engaged correctly. Make sure they are securely fastened to prevent any disassembly during operation. 4. Clean and lubricate the components if necessary. Remove any dirt, debris, or residue that may hinder the assembly process. Apply a small amount of lubricant, if recommended, to facilitate smooth movement and proper engagement of the parts. 5. If the issue persists, consult the troubleshooting section of the manual or contact Bosch customer support for further assistance. They can provide specific guidance based on the nature of the assembly problem. By following these steps, you can troubleshoot and address any issues related to the assembly of the Bosch GSR 10,8-2-LI Professional drill machine.
If the battery of the Bosch GSR 10,8-2-LI Professional drill machine is not charging, you can try the following steps: 1. Ensure that the battery is properly inserted into the drill machine. Remove the battery and reinsert it, making sure it is securely seated in the handle. 2. Check the battery contacts for any dirt, debris, or corrosion. Clean the contacts using a soft, dry cloth or a cotton swab dipped in rubbing alcohol. Ensure that the contacts are clean and free from any obstruction. 3. Verify that the charger is plugged into a functioning power outlet. Make sure the power outlet is supplying electricity and that there are no issues with the electrical connection. 4. Inspect the charger for any damage or signs of malfunction. If the charger appears to be damaged, do not use it and contact Bosch customer support for assistance. 5. Try charging the battery with a different charger, if available. This can help determine if the issue lies with the battery or the charger. 6. If none of the above steps resolve the issue, consider replacing the battery or contacting Bosch customer support for further assistance. By following these steps, you can troubleshoot and address the issue of the Bosch GSR 10,8-2-LI Professional drill machine not charging its battery.
Yes, the manual of the Bosch GSR 10,8-2-LI Professional is available in English .
Is your question not listed? Ask your question here
No results
Need help?
Do you have a question about the Bosch and is the answer not in the manual?
Question and answer
Number of questions: 1Is this manual available in swedish