View the manual for the Bosch GSB 18V-85 C here, for free. This manual comes under the category drill machines and has been rated by 1 people with an average of a 8.1. This manual is available in the following languages: English. Do you have a question about the Bosch GSB 18V-85 C or do you need help? Ask your question here


| Brand | Bosch |
| Model | GSB 18V-85 C | 0 601 9G0 300 |
| Product | drill machine |
| EAN | 3165140867030 |
| Language | English |
| Filetype | User manual (PDF) |
| Drilling diameter in concrete (max) | 16 mm |
| Torque settings | 26 |
| Maximum torque (soft applications) | 47 N⋅m |
| Number of gears | 2 |
| Chuck capacity (min) | 1.5 mm |
| Chuck capacity (max) | 13 mm |
| Spindle thread | 1/2" |
| Sound level uncertainty | 3 dB |
| Sound pressure level | 87 dB |
| Impact rate (high speed) | 31500 bpm |
| Sound power level | 98 dB |
| Vibration level (metal drilling) | 2.5 m/s² |
| Idle speed (1st gear) | 480 RPM |
| Idle speed (2nd gear) | 2100 RPM |
| Screw diameter (max) | 12 mm |
| Drilling diameter in wood (max) | 82 mm |
| Drilling diameter in steel (max) | 13 mm |
| Maximum torque (hard applications) | 85 N⋅m |
| Soft grip | Yes |
| Drilling, Impact drilling, Screwdriving | |
| Chuck type | Keyless |
| Product design | Pistol grip drill |
| Built-in light | Yes |
| Drilling | Yes |
| Screwdriving | Yes |
| Hammer drilling | Yes |
| Product color | Blue |
| Electronic Cell Protection (ECP) | Yes |
| Battery level indicator | Yes |
| Power source | Battery |
| Battery technology | Lithium-Ion (Li-Ion) |
| Battery voltage | 18 V |
| Battery capacity | 5 Ah |
| Width | 204 mm |
| Height | 255 mm |
| Number of batteries included | 2 pc(s) |
| Battery charger included | Yes |
| Battery included | Yes |
Can't find the answer to your question in the manual? You may find the answer to your question in the FAQs about the Bosch GSB 18V-85 C below.
1. Soak the rusty part in vinegar until completely soaked through. 2. Let the vinegar work on the rust for 24 hours. 3. Remove the rust with a wire brush or aluminium foil.
The maximum achievable charge level is expressed with 16V or 20V. The V in this case stands for Volt.
The amount of sound varies a lot per brand and type of drill machine, it is therefore wise to wear hearing protection to be sure.
The Bosch GSB 18V-85 C has a height of 255 mm.
The Bosch GSB 18V-85 C has a width of 204 mm.
The maximum drilling diameter in concrete for the Bosch GSB 18V-85 C is 16 mm. This means it is suitable for a wide range of drilling tasks in concrete.
Yes, the Bosch GSB 18V-85 C features a soft grip. This ensures a comfortable and secure grip for the user, reducing fatigue during prolonged use.
The Bosch GSB 18V-85 C has 26 torque settings. This allows for precise control over the torque applied to different materials, making it versatile for various drilling and fastening applications.
The maximum torque for soft applications in the Bosch GSB 18V-85 C is 47 N⋅m. This indicates a high power output, allowing for efficient and effortless drilling in soft materials.
Yes, the Bosch GSB 18V-85 C is equipped with a battery level indicator. This feature enables the user to easily monitor the remaining power of the battery, ensuring uninterrupted work and preventing unexpected power loss.
To ensure a secure grip and stance while using the Bosch GSB 18V-85 C drill machine, follow these steps: 1. Hold the machine with a firm grip: When using the drill machine, make sure to hold it firmly with both hands. This provides better control and stability while operating the tool. 2. Provide a secure stance: Stand in a stable position with your feet shoulder-width apart. This helps maintain balance and reduces the risk of losing control of the drill machine. 3. Secure the workpiece: Use clamps or a vice to secure the workpiece firmly in place. This ensures stability and prevents the workpiece from moving or slipping during drilling. 4. Wait for the machine to come to a complete stop: After releasing the trigger, allow the drill machine to come to a complete stop before placing it down. This prevents any accidental movement or loss of control. By following these steps, you can ensure a secure grip and stance while using the Bosch GSB 18V-85 C drill machine, enhancing both safety and efficiency in your drilling tasks.
To ensure workpiece stability while using the Bosch GSB 18V-85 C drill machine, follow these steps: 1. Use clamping devices or a vice: If the workpiece is not stable, secure it using clamps or a vice. This will hold the workpiece firmly in place and prevent it from moving or slipping during drilling. 2. Adjust the depth stop: Set the depth stop to the desired drilling depth. This will help maintain consistency and prevent the drill bit from going too deep into the workpiece. 3. Apply even pressure: When drilling, apply even pressure on the drill machine. This will help maintain stability and prevent the drill bit from wandering or causing damage to the workpiece. 4. Use the correct drill bit: Ensure that you are using the appropriate drill bit for the material you are drilling. Using the wrong drill bit can lead to instability and poor drilling results. 5. Start with a pilot hole: For larger or harder materials, it is recommended to start with a pilot hole. This will provide a guide for the drill bit and improve stability during drilling. By following these steps, you can ensure workpiece stability while using the Bosch GSB 18V-85 C drill machine, resulting in accurate and efficient drilling.
If the Bosch GSB 18V-85 C drill machine does not come to a complete stop after releasing the trigger, you can take the following steps: 1. Check for overload: In normal conditions of use, the power tool cannot be overloaded. If the power tool is overloaded or not kept within the permitted operating temperature range, the power output is reduced or the power tool is switched off. Wait for the power tool to cool down and reach the permitted operating temperature range again. 2. Switch to gear 1: If the power tool is not coming to a complete stop, switch the gear selector to gear 1. This lower gear setting can help reduce the speed and bring the machine to a stop. 3. Run the power tool at no load: Another option is to run the power tool at no load for a short period. This can help dissipate any excess energy and bring the machine to a complete stop. 4. Wait for the LED indicator: If the power tool has a temperature-controlled overload protector, an LED indicator will light up red when the tool is overheating. Wait until the LED indicator extinguishes, indicating that the power tool has reached the permitted operating temperature range again. By following these steps, you can address the issue of the Bosch GSB 18V-85 C drill machine not coming to a complete stop after releasing the trigger.
To protect the battery of the Bosch GSB 18V-85 C drill machine from heat, fire, water, and moisture, follow these steps: 1. Avoid exposing the battery to extreme temperatures: Keep the battery away from direct sunlight, heaters, or any other heat sources. High temperatures can damage the battery and reduce its performance. 2. Store the battery in a cool and dry place: When not in use, store the battery in a cool and dry environment. Avoid storing it in humid areas or places with excessive moisture, as this can lead to corrosion and damage the battery. 3. Protect the battery from water and moisture: Ensure that the battery is not exposed to water or moisture. Keep it away from wet surfaces and avoid using the drill machine in rainy or wet conditions. 4. Use the battery only with the Bosch GSB 18V-85 C drill machine: Do not use batteries from other brands or models with the Bosch GSB 18V-85 C drill machine. Using incompatible batteries can lead to overheating, fire, or damage to the tool. 5. Follow the manufacturer's instructions for charging: Use the charger specified by the manufacturer to charge the battery. Avoid using chargers that are not recommended, as they may not provide the correct voltage or current, which can be dangerous for the battery. By following these steps, you can protect the battery of the Bosch GSB 18V-85 C drill machine and ensure its optimal performance and longevity.
No, it is not recommended to use a different brand of battery with the Bosch GSB 18V-85 C drill machine. The use of incompatible batteries can lead to various issues, including reduced performance, overheating, and potential damage to the tool. It is important to use the battery specifically designed for the Bosch GSB 18V-85 C drill machine to ensure optimal compatibility and safety. Using a different brand of battery may also void the warranty of the drill machine. To maintain the best performance and longevity of your Bosch GSB 18V-85 C drill machine, it is advised to use only the recommended Bosch batteries that are designed to work seamlessly with the tool.
Yes, the manual of the Bosch GSB 18V-85 C is available in English .
Is your question not listed? Ask your question here
No results
Need help?
Do you have a question about the Bosch and is the answer not in the manual?
Question and answer
Number of questions: 0