View the manual for the Bosch GSB 18V-60 C Professional here, for free. This manual comes under the category drill machines and has been rated by 1 people with an average of a 9.1. This manual is available in the following languages: English. Do you have a question about the Bosch GSB 18V-60 C Professional or do you need help? Ask your question here



| Brand | Bosch |
| Model | GSB 18V-60 C Professional | 0 601 9G2 103 |
| Product | drill machine |
| EAN | 3165140867337 |
| Language | English |
| Filetype | User manual (PDF) |
| Drilling diameter in concrete (max) | 13 mm |
| Torque settings | 21 |
| Maximum torque (soft applications) | 31 N⋅m |
| Number of gears | 2 |
| Chuck capacity (min) | 1.5 mm |
| Chuck capacity (max) | 13 mm |
| Spindle thread | 1/2" |
| Sound level uncertainty | 3 dB |
| Sound pressure level | 87 dB |
| Impact rate (high speed) | 28500 bpm |
| Sound power level | 98 dB |
| Vibration level (concrete drilling) | 8 m/s² |
| Idle speed (1st gear) | 600 RPM |
| Idle speed (2nd gear) | 1900 RPM |
| Screw diameter (max) | 10 mm |
| Drilling diameter in wood (max) | 38 mm |
| Drilling diameter in steel (max) | 13 mm |
| Maximum torque (hard applications) | 60 N⋅m |
| Soft grip | Yes |
| Reverse | Yes |
| Drilling, Impact drilling, Screwdriving | |
| Chuck type | Keyless |
| Product design | Pistol grip drill |
| Built-in light | Yes |
| Drilling | Yes |
| Screwdriving | Yes |
| Hammer drilling | Yes |
| Vibration emission | 2.5 m/s² |
| Product color | Black, Blue, Red |
| Electronic Cell Protection (ECP) | Yes |
| Uncertainty K | 1.5 m/s² |
| Battery level indicator | Yes |
| Charging time | 65 min |
| Power source | Battery |
| Battery technology | Lithium-Ion (Li-Ion) |
| Battery voltage | 18 V |
| Depth | 184 mm |
| Height | 248 mm |
| Carrying case | Yes |
| Battery included | No |
Can't find the answer to your question in the manual? You may find the answer to your question in the FAQs about the Bosch GSB 18V-60 C Professional below.
1. Soak the rusty part in vinegar until completely soaked through. 2. Let the vinegar work on the rust for 24 hours. 3. Remove the rust with a wire brush or aluminium foil.
The maximum achievable charge level is expressed with 16V or 20V. The V in this case stands for Volt.
The amount of sound varies a lot per brand and type of drill machine, it is therefore wise to wear hearing protection to be sure.
The Bosch GSB 18V-60 C Professional has a height of 248 mm.
The Bosch GSB 18V-60 C Professional has a depth of 184 mm.
Yes, the Bosch GSB 18V-60 C Professional has a soft grip. This provides the user with a comfortable and secure grip, making it easier to handle during use.
The Bosch GSB 18V-60 C Professional has 21 torque settings. This allows the user to adjust the torque according to the specific task, providing versatility and precision.
Yes, the Bosch GSB 18V-60 C Professional has a reverse function. This is beneficial when removing screws or backing out drill bits, increasing convenience and efficiency.
The Bosch GSB 18V-60 C Professional has a battery level indicator. This feature allows the user to easily monitor the amount of battery power remaining, preventing unexpected shutdowns and allowing for better planning during tasks.
The Bosch GSB 18V-60 C Professional has a charging time of 65 minutes. This relatively short charging time ensures minimal downtime and keeps the user productive.
To reduce the effects of vibration while using the Bosch GSB 18V-60 C Professional drill machine, follow these steps: 1. Dress properly: Avoid wearing loose clothing, jewelry, or long hair that can get caught in moving parts and increase the risk of vibration-related injuries. 2. Use dust extraction and collection facilities: If your drill machine is equipped with devices for connecting dust extraction and collection facilities, make sure to use them. Dust collection can help reduce dust-related hazards and improve the overall safety of your work environment. By following these steps, you can minimize the effects of vibration and ensure a safer and more comfortable drilling experience with the Bosch GSB 18V-60 C Professional drill machine.
To insert the Bluetooth Low Energy Module GCY 30-4 into the Bosch GSB 18V-60 C Professional drill machine, follow these steps: 1. Read the corresponding operating instructions for the Bluetooth Low Energy Module GCY 30-4. These instructions will provide specific information on how to insert the module into the drill machine. 2. Ensure that the drill machine is turned off and the battery is removed before proceeding with the module insertion. 3. Locate the designated slot or compartment for the Bluetooth Low Energy Module on the drill machine. It is usually located on the handle or near the battery compartment. 4. Align the module with the slot or compartment, ensuring that the connectors on the module match the corresponding connectors in the drill machine. 5. Gently insert the module into the slot or compartment, applying even pressure until it is fully seated. 6. Once the module is inserted, you can reattach the battery and turn on the drill machine. By following these steps, you can successfully insert the Bluetooth Low Energy Module GCY 30-4 into the Bosch GSB 18V-60 C Professional drill machine.
To charge and maintain the battery of the Bosch GSB 18V-60 C Professional drill machine, follow these steps: 1. Protect the battery against moisture and water. Store the battery within a temperature range of -20 to 50°C and avoid leaving it in your car during hot summer days. 2. Occasionally clean the ventilation slots on the battery using a soft brush that is clean and dry. 3. If you notice a significantly reduced operating time after charging, it indicates that the battery has deteriorated and needs to be replaced. 4. Remove the battery from the power tool before carrying out any maintenance or changing the tool. This will prevent any unintentional activation of the power tool. 5. To check the battery's state of charge, press the button for the battery charge indicator. The green LEDs on the indicator will indicate the battery's capacity. By following these steps, you can ensure the proper charging and maintenance of the battery for the Bosch GSB 18V-60 C Professional drill machine.
To change the tool and use the keyless chuck on the Bosch GSB 18V-60 C Professional drill machine, follow these steps: 1. Ensure that the drill machine is turned off and the battery is removed before changing the tool. 2. Locate the chuck on the front of the drill machine. The chuck is the part that holds the drill bit or other tool attachments. 3. To open the chuck, hold the drill machine with one hand and rotate the chuck sleeve counterclockwise with your other hand. This will loosen the jaws of the chuck. 4. Insert the desired tool into the chuck, making sure it is aligned with the jaws. 5. Tighten the chuck by rotating the chuck sleeve clockwise with your hand. Continue rotating until the tool is securely held in place. 6. To release the tool, hold the drill machine with one hand and rotate the chuck sleeve counterclockwise to loosen the jaws. Remove the tool from the chuck. By following these steps, you can easily change the tool and use the keyless chuck on the Bosch GSB 18V-60 C Professional drill machine.
When using the Bosch GSB 18V-60 C Professional drill machine for dust/chip extraction, it is important to follow these safety precautions: 1. Dress properly by avoiding loose clothing, jewelry, and long hair that can get caught in moving parts. 2. Connect and properly use dust extraction and collection facilities if provided. This helps reduce dust-related hazards. 3. Use a dust extraction system suitable for the material whenever possible to minimize the release of harmful dust particles. 4. Ensure good ventilation at the workplace to improve air quality and reduce the concentration of airborne particles. 5. Consider wearing a P2 filter class breathing mask to protect against inhaling dust particles. By following these safety precautions, you can minimize the risks associated with dust and chip extraction while using the Bosch GSB 18V-60 C Professional drill machine.
Yes, the manual of the Bosch GSB 18V-60 C Professional is available in English .
Is your question not listed? Ask your question here
No results
Need help?
Do you have a question about the Bosch and is the answer not in the manual?
Question and answer
Number of questions: 0