View the manual for the Bosch GSB 18 V-LI Professional here, for free. This manual comes under the category drill machines and has been rated by 1 people with an average of a 6.1. This manual is available in the following languages: English. Do you have a question about the Bosch GSB 18 V-LI Professional or do you need help? Ask your question here


| Brand | Bosch |
| Model | GSB 18 V-LI Professional | 0 615 990 CV0 |
| Product | drill machine |
| EAN | 3165140607490 |
| Language | English |
| Filetype | User manual (PDF) |
| Drilling diameter in concrete (max) | 13 mm |
| Torque settings | 19 |
| Maximum torque (soft applications) | 28 N⋅m |
| Number of gears | 2 |
| Chuck capacity (min) | 1.5 mm |
| Chuck capacity (max) | 13 mm |
| Idle speed (1st gear) | 500 RPM |
| Idle speed (2nd gear) | 1700 RPM |
| Screw diameter (max) | 8 mm |
| Drilling diameter in wood (max) | 35 mm |
| Drilling diameter in steel (max) | 13 mm |
| Maximum torque (hard applications) | 67 N⋅m |
| Soft grip | Yes |
| Reverse | Yes |
| Drilling | |
| Chuck type | Keyless |
| Product design | Pistol grip drill |
| Built-in light | Yes |
| Drilling | Yes |
| Product color | Black, Blue |
| Power source | Battery |
| Battery technology | Lithium-Ion (Li-Ion) |
| Battery voltage | 18 V |
| Weight | 1900 g |
Can't find the answer to your question in the manual? You may find the answer to your question in the FAQs about the Bosch GSB 18 V-LI Professional below.
1. Soak the rusty part in vinegar until completely soaked through. 2. Let the vinegar work on the rust for 24 hours. 3. Remove the rust with a wire brush or aluminium foil.
The maximum achievable charge level is expressed with 16V or 20V. The V in this case stands for Volt.
The amount of sound varies a lot per brand and type of drill machine, it is therefore wise to wear hearing protection to be sure.
The Bosch GSB 18 V-LI Professional has a weight of 1900 g.
Yes, the Bosch GSB 18 V-LI Professional has soft grip, providing comfort and better handling for the user.
The Bosch GSB 18 V-LI Professional has 19 torque settings, allowing for better control and precision in different applications.
Yes, the Bosch GSB 18 V-LI Professional has a reverse function, making it easier to remove screws or extract drill bits.
The Bosch GSB 18 V-LI Professional has 2 gears, allowing the user to switch between high speed and high torque settings for different drilling tasks.
The Bosch GSB 18 V-LI Professional has a chuck capacity ranging from 1.5 mm to 13 mm, giving the user versatility to fit different drill bits and accessories.
To properly secure the workpiece when using the Bosch GSB 18 V-LI Professional drill machine, follow these steps: 1. Ensure a stable and balanced position: Stand in a stable position with your feet shoulder-width apart to maintain balance and control over the drill machine. 2. Use appropriate personal protective equipment: Wear suitable clothing that is not loose-fitting and avoid wearing jewelry or long hair that could get caught in the moving parts of the drill machine. 3. Connect dust extraction (if available): If the drill machine has a dust extraction feature, make sure it is properly connected and used to reduce the risk of dust hazards. 4. Follow the recommended operating procedures: Read and follow the operating instructions provided in the manual for the drill machine. Pay attention to any specific guidelines or precautions mentioned for securing the workpiece. 5. Apply the drill machine to the workpiece when it is switched off: Before starting the drilling process, ensure that the drill machine is switched off. This will prevent any accidental rotation of the tool inserts. Remember to always prioritize safety when using power tools and follow the guidelines provided in the manual for the Bosch GSB 18 V-LI Professional drill machine.
If the Bosch GSB 18 V-LI Professional drill machine does not come with all the components mentioned in the delivery scope section of the manual, follow these steps: 1. Check the packaging: Carefully inspect the packaging to ensure that no components are missing. Sometimes, smaller components may be packaged separately or hidden within the packaging materials. 2. Contact the seller or retailer: Reach out to the seller or retailer from whom you purchased the drill machine. Inform them about the missing components and provide them with the necessary details, such as the item ID and the specific components that are missing. 3. Provide proof of purchase: If requested by the seller or retailer, provide them with a copy of the purchase receipt or any other proof of purchase to validate your claim. 4. Follow the seller's instructions: Follow the instructions provided by the seller or retailer regarding the replacement of the missing components. They may offer to send you the missing components or provide alternative solutions to resolve the issue. 5. Contact Bosch customer support: If the seller or retailer is unable to assist you, contact Bosch customer support directly. Provide them with the details of the missing components and any relevant information regarding your purchase. By following these steps, you can address the issue of missing components for the Bosch GSB 18 V-LI Professional drill machine and ensure that you have all the necessary components for its proper use.
If the Bosch GSB 18 V-LI Professional drill machine is not performing well when drilling in metal, follow these steps: 1. Check the drill bit: Ensure that you are using the correct drill bit for metal drilling. Use a high-speed steel (HSS) or cobalt drill bit specifically designed for metal. Check the condition of the drill bit for any signs of damage or dullness. 2. Adjust the drilling speed: Set the drill machine to a lower speed setting when drilling in metal. Higher speeds can cause excessive heat and may result in poor performance. Start with a slower speed and gradually increase if necessary. 3. Apply steady pressure: Apply consistent and steady pressure while drilling. Avoid excessive force, as it can cause the drill bit to overheat and become less effective. Let the drill bit do the work and allow it to cut through the metal at its own pace. 4. Use cutting lubricant: Apply a cutting lubricant or a suitable coolant to the drilling area. This helps to reduce friction and heat buildup, improving the drilling performance and prolonging the life of the drill bit. 5. Check the drill machine settings: Ensure that the drill machine is set to the correct drilling mode (e.g., rotary drilling or hammer drilling) and that the clutch settings are appropriate for the task. Adjust the settings as needed for optimal performance. By following these steps, you can improve the performance of the Bosch GSB 18 V-LI Professional drill machine when drilling in metal.
To interpret the technical data provided in the manual for the Bosch GSB 18 V-LI Professional drill machine, follow these steps: 1. Identify the relevant specifications: Look for the specific technical data related to the drill machine. This may include information such as maximum drilling diameter, maximum screw diameter, chuck range, weight, sound power level, and recommended batteries and chargers. 2. Understand the measurements: Pay attention to the units of measurement used in the technical data. Ensure that you understand the meaning of each measurement, such as millimeters for drilling diameter or kilograms for weight. 3. Compare with your requirements: Consider your specific needs and requirements for using the drill machine. Compare the technical data provided in the manual with your intended use. For example, if you plan to drill larger holes, ensure that the maximum drilling diameter meets your needs. 4. Consider the limitations: Take note of any limitations or restrictions mentioned in the technical data. For instance, if there are specific materials or surfaces for which the drill machine is not recommended, be aware of these limitations to avoid potential issues. 5. Seek clarification if needed: If you have any doubts or questions about the technical data, reach out to Bosch customer support or consult the official Bosch website for further clarification. They can provide additional information or guidance to help you interpret the technical data accurately. By following these steps, you can effectively interpret the technical data provided in the manual for the Bosch GSB 18 V-LI Professional drill machine and make informed decisions regarding its usage.
If the built-in light of the Bosch GSB 18 V-LI Professional drill machine is not working properly, follow these steps: 1. Check the battery: Ensure that the battery is fully charged and properly inserted into the drill machine. If the battery is low or not properly connected, it may affect the functionality of the built-in light. 2. Inspect the light bulb: Check the light bulb to see if it is intact and properly seated in its socket. If the bulb is damaged or loose, it may need to be replaced. Refer to the manual for instructions on how to replace the light bulb. 3. Clean the light lens: Clean the lens of the built-in light using a soft, lint-free cloth. Dust, debris, or dirt on the lens can obstruct the light output and affect its performance. 4. Check the light switch: Ensure that the light switch is in the correct position and functioning properly. Toggle the switch on and off a few times to see if it resolves the issue. If the switch is faulty, it may need to be repaired or replaced. 5. Contact Bosch customer support: If the above steps do not resolve the issue, contact Bosch customer support for further assistance. They can provide troubleshooting guidance or arrange for repairs if necessary. By following these steps, you can address the issue of a malfunctioning built-in light on the Bosch GSB 18 V-LI Professional drill machine and restore its proper functionality.
Yes, the manual of the Bosch GSB 18 V-LI Professional is available in English .
Is your question not listed? Ask your question here
No results
Need help?
Do you have a question about the Bosch and is the answer not in the manual?
Question and answer
Number of questions: 0