View the manual for the Bosch GSB 18-2-LI Plus here, for free. This manual comes under the category drill machines and has been rated by 2 people with an average of a 6.6. This manual is available in the following languages: English. Do you have a question about the Bosch GSB 18-2-LI Plus or do you need help? Ask your question here




| Brand | Bosch |
| Model | GSB 18-2-LI Plus | 0 601 9E7 102 |
| Product | drill machine |
| EAN | 3165140817745, 3165140876223 |
| Language | English |
| Filetype | User manual (PDF) |
| Drilling diameter in concrete (max) | 13 mm |
| Torque settings | 21 |
| Maximum torque (soft applications) | 24 N⋅m |
| Number of gears | 2 |
| Chuck capacity (min) | 1.5 mm |
| Chuck capacity (max) | 13 mm |
| Spindle thread | 1/2" |
| Sound level uncertainty | 3 dB |
| Sound pressure level | 89 dB |
| Sound power level | 100 dB |
| Vibration level (metal drilling) | 2.5 m/s² |
| Vibration level (concrete drilling) | 13.5 m/s² |
| Idle speed (1st gear) | 500 RPM |
| Idle speed (2nd gear) | 1900 RPM |
| Screw diameter (max) | 8 mm |
| Drilling diameter in wood (max) | 38 mm |
| Drilling diameter in steel (max) | 13 mm |
| Maximum torque (hard applications) | 63 N⋅m |
| Soft grip | Yes |
| Drilling, Screwdriving | |
| Chuck type | Keyless |
| Product design | Pistol grip drill |
| Built-in light | Yes |
| Drilling | Yes |
| Screwdriving | Yes |
| Product color | Black, Blue |
| Electronic Cell Protection (ECP) | Yes |
| Uncertainty K | 1.5 m/s² |
| Depth | 202 mm |
| Height | 230 mm |
| Weight | 1500 g |
| Power source | Battery |
| Battery technology | Lithium-Ion (Li-Ion) |
| Battery voltage | 18 V |
| Battery capacity | 2 Ah |
| Battery included | No |
Can't find the answer to your question in the manual? You may find the answer to your question in the FAQs about the Bosch GSB 18-2-LI Plus below.
1. Soak the rusty part in vinegar until completely soaked through. 2. Let the vinegar work on the rust for 24 hours. 3. Remove the rust with a wire brush or aluminium foil.
The maximum achievable charge level is expressed with 16V or 20V. The V in this case stands for Volt.
The amount of sound varies a lot per brand and type of drill machine, it is therefore wise to wear hearing protection to be sure.
The Bosch GSB 18-2-LI Plus has a weight of 1500 g.
The Bosch GSB 18-2-LI Plus has a height of 230 mm.
The Bosch GSB 18-2-LI Plus has a depth of 202 mm.
The maximum drilling diameter in concrete for the Bosch GSB 18-2-LI Plus is 13 mm. This means that the drill is capable of drilling holes with a diameter of up to 13 mm in concrete.
Yes, the Bosch GSB 18-2-LI Plus has a soft grip. This feature provides the user with a comfortable and secure grip, making it easier to handle and control the drill during use.
The Bosch GSB 18-2-LI Plus has 21 torque settings. This allows the user to adjust the torque to suit different applications, providing greater precision and control.
The maximum torque for soft applications for the Bosch GSB 18-2-LI Plus is 24 N⋅m. This means that the drill provides a high level of torque for applications that require more power and force.
The Bosch GSB 18-2-LI Plus has 2 gears. Having multiple gears allows the user to adjust the speed and power of the drill to suit different tasks and materials.
To know what items are included in the standard delivery scope of the Bosch GSB 18-2-LI Plus drill machine, you can refer to the manual. The manual states that the standard delivery scope includes the cordless screwdriver/combination cordless drill. However, it's important to note that the battery, application tools, and other accessories shown or described are not part of the standard delivery scope. For a complete overview of accessories that can be used with the Bosch GSB 18-2-LI Plus drill machine, you can refer to the accessories program provided by Bosch. Please note that the information provided is based on the manual for the Bosch GSB 18-2-LI Plus drill machine and may vary depending on the version and language of the manual.
The Bosch GSB 18-2-LI Plus drill machine is intended for the following uses: 1. Driving in and loosening screws: The drill machine can be used to drive in screws into various materials such as wood, metal, ceramics, and plastic. It can also be used to loosen screws when needed. 2. Drilling in wood, metal, ceramics, and plastic: The drill machine is designed to drill holes in different types of materials, including wood, metal, ceramics, and plastic. It provides the necessary power and control for efficient drilling. 3. Impact drilling in bricks, brickwork, and masonry: In addition to regular drilling, the GSB 18-2-LI Plus drill machine is specifically designed for impact drilling in tougher materials such as bricks, brickwork, and masonry. This feature allows for more effective drilling in these materials. It's important to note that the drill machine should be used according to the instructions provided in the manual to ensure safe and proper operation.
The technical data of the Bosch GSB 18-2-LI Plus drill machine can be found in the manual. The manual provides a table on page 164 that lists the technical data of the machine. This includes information such as voltage, speed, torque, drilling diameter, weight, and noise/vibration values. Please note that the information provided is based on the manual for the Bosch GSB 18-2-LI Plus drill machine and may vary depending on the version and language of the manual.
To remove and insert the battery of the Bosch GSB 18-2-LI Plus drill machine, follow these steps: 1. Make sure the drill machine is turned off and the switch is in the "off" position. 2. Locate the battery release buttons on both sides of the battery pack. 3. Press and hold both release buttons simultaneously. 4. While holding the release buttons, slide the battery pack out of the drill machine. 5. To insert a new battery pack, align the battery pack with the battery compartment on the drill machine. 6. Slide the battery pack into the compartment until it clicks into place. 7. Ensure that the battery pack is securely inserted by gently pulling on it to check for any movement. Please note that it's important to use only compatible batteries with the Bosch GSB 18-2-LI Plus drill machine. Refer to the manual for more information on compatible batteries and proper handling procedures.
To select and use accessories such as bit holders and belt clips with the Bosch GSB 18-2-LI Plus drill machine, follow these steps: 1. Bit Holders: a. Choose a compatible bit holder that matches the type of bits you will be using. b. Insert the bit into the bit holder and ensure it is securely held in place. c. Attach the bit holder to the drill machine by inserting it into the chuck and tightening the chuck securely. 2. Belt Clips: a. Locate the belt clip attachment point on the drill machine. b. Align the holes on the belt clip with the attachment point. c. Insert the screws provided with the belt clip into the holes and tighten them securely using a suitable screwdriver. Ensure that the accessories are properly installed and securely attached before using the drill machine. Refer to the manual for more detailed instructions and safety guidelines regarding the use of accessories with the Bosch GSB 18-2-LI Plus drill machine. Please note that the information provided is based on general knowledge of using accessories with drill machines and may vary depending on the specific model and design of the Bosch GSB 18-2-LI Plus.
Yes, the manual of the Bosch GSB 18-2-LI Plus is available in English .
Is your question not listed? Ask your question here
No results
Need help?
Do you have a question about the Bosch and is the answer not in the manual?
Question and answer
Number of questions: 1How replace keyless chuck