Bosch GSB 13 RE Professional manual

Bosch GSB 13 RE Professional
8.6 · 12
PDF manual
 · 71 pages
English
manualBosch GSB 13 RE Professional
38 | 繁體中文
u 不要在易爆環境,如有易燃液體、氣體或粉塵的
環境下操作電動工具。電動工具產生的火花會點
燃粉塵或氣體。
u 讓兒童和旁觀者離開後操作電動工具。注意力不
集中會使您失去對工具的控制。
電氣安全
u 電動工具插頭必須與插座相配。 絕不能以任何方
式改裝插頭。 需接地的電動工具不能使用任何轉
換插頭。未經改裝的插頭和相配的插座將減少電
擊危險。
u 避免人體接觸接地表面,如管道、散熱片和冰
箱。如果您身體接地會增加電擊危險。
u 不得將電動工具暴露在雨中或潮濕環境中。水進
入電動工具將增加電擊危險。
u 不得濫用電線。 絕不能用電線搬運、拉動電動工
具或拔出其插頭。 使電線遠離熱源、油、銳利邊
緣或移動零件。受損或纏繞的軟線會增加電擊危
險。
u 當在戶外使用電動工具時,使用適合戶外使用的
延長線。適合戶外使用的軟線,將減少電擊危
險。
u 如果在潮濕環境下操作電動工具是不可避免的,
應使用剩餘電流動作保護器(RCD)。使用RCD
可降低電擊危險。
人身安全
u 保持警覺,當操作電動工具時關注所從事的操作
並保持清醒。 當您感到疲倦,或在有藥物、酒精
或治療反應時,不要操作電動工具。在操作電動
工具時瞬間的疏忽會導致嚴重人身傷害。
u 使用個人防護裝置。 始終佩戴護目鏡。安全裝
置,諸如適當條件下使用防塵面具、防滑安全
鞋、安全帽、聽力防護等裝置能減少人身傷害。
u 防止意外起動。 確保開關在連接電源和/或電池
盒、拿起或搬運工具時處於關閉位置。手指放在
已接通電源的開關上或開關處於接通時插入插頭
可能會導致危險。
u 在電動工具接通之前,拿掉所有調節鑰匙或扳
手。遺留在電動工具旋轉零件上的扳手或鑰匙會
導致人身傷害。
u 手不要伸展得太長。 時刻注意立足點和身體平
衡。這樣在意外情況下能很好地控制電動工具。
u 著裝適當。 不要穿寬鬆衣服或佩戴飾品。 讓您的
衣物及頭髮遠離運動部件。寬鬆衣服、佩飾或長
髮可能會捲入運動部件中。
u 如果提供了與排屑、集塵設備連接用的裝置,要
確保他們連接完好且使用得當。使用這些裝置可
減少塵屑引起的危險。
u 切勿因經常使用工具所累積的熟練感而過度自
信,輕忽工具的安全守則。任何一個魯莽的舉動
都可能瞬間造成人員重傷。
電動工具使用和注意事項
u 不要濫用電動工具, 根據用途使用適當的電動工
具。選用適當設計的電動工具會使您工作更有
效、更安全。
u 如果開關不能開啟或關閉工具電源,則不能使用
該電動工具。不能用開關來控制的電動工具是危
險的且必須進行修理。
u 在進行任何調整、更換配件或貯存電動工具之
前,必須從電源上拔掉插頭並/或取出電池盒。
這種防護性措施將減少工具意外起動的危險。
u 將閒置不用的電動工具貯存在兒童所及範圍之
外,並且不要讓不熟悉電動工具或對這些說明不
瞭解的人操作電動工具。電動工具在未經培訓的
用戶手中是危險的。
u 保養電動工具與配備。 檢查運動件是否調整到位
或卡住,檢查零件破損情況和影響電動工具運行
的其他狀況。 如有損壞,電動工具應在使用前修
理好。許多事故由維護不良的電動工具引發。
u 保持切削刀具鋒利和清潔。保養良好的有鋒利切
削刃的刀具不易卡住而且容易控制。
u 按照使用說明書,考慮作業條件和進行的作業來
使用電動工具、配件和工具的刀頭等。將電動工
具用於那些與其用途不符的操作可能會導致危
險。
u 把手及握持區應保持乾燥、潔淨,且不得沾染任
何油液或油脂。易滑脫的把手及握持區將無法讓
您在發生意外狀況時安全地抓緊並控制工具。
檢修
u 將您的電動工具送交專業維修人員,必須使用同
樣的備件進行更換。這樣將確保所維修的電動工
具的安全性。

鑽孔的安全警告

所有作業的安全說明
u 鑽孔時請戴上耳罩。暴露在噪音下會造成聽力喪
失。
u 使用輔助握把。失去控制可能會造成人員受傷。
u 進行作業時,負責進行切割的配件或固定釘可能
會碰觸到隱藏的配線或電動工具的電線,請從絕
緣握把處拿持電動工具。負責進行切割的配件或
固定釘若是觸及「導電」電線,可能導致電動工
具外露的金屬部件「導電」,進而使操作人員遭
受電擊。
使用長鑽頭的安全說明
u 切勿以超過鑽頭額定最高轉速的速度操作。若鑽
頭未接觸工件且以超過最高轉速的速度無負載轉
動,可能會讓鑽頭彎曲並導致人員受傷。
u 請務必以低速啟動並將鑽尖確實抵住工件。若鑽
頭未接觸工件且以超過最高轉速的速度無負載轉
動,可能會讓鑽頭彎曲並導致人員受傷。
u 請沿著鑽頭方向施加適當的壓力,切勿過度施
壓。鑽頭可能會彎曲並造成斷裂、失控並導致人
員受傷。
其他安全注意事項
u 如果嵌件工具被夾住了,請立刻關閉電動工具的
電源。請準備好承受反作用力所造成的反彈。
動工具過載時或當它在進行加工的工件內部歪斜
時,都會造成嵌件工具被夾住不動。
1 609 92A 5BU | (06.11.2020) Bosch Power Tools

View the manual for the Bosch GSB 13 RE Professional here, for free. This manual comes under the category drill machines and has been rated by 12 people with an average of a 8.6. This manual is available in the following languages: English. Do you have a question about the Bosch GSB 13 RE Professional or do you need help? Ask your question here

Need help?

Do you have a question about the Bosch and is the answer not in the manual?

  • Receive updates on solutions
  • Get answers to your question

Question and answer

Number of questions: 5
J
Juan Manuel MassiniJuly 11, 2021

Hello, the button that changes the direction of the drill is stuck and the drill is stuck in reverse. I don't know how to fix it.

Hello, the button that changes the direction of the drill is stuck and the drill is stuck in reverse. I don't know how to fix...
zoom-in
View photo
This message has been automatically translated
K
KatiDecember 26, 2017

Hello, something curious happened to us, we cannot remove the drill bit in any way. Has this happened to anyone else? Do you know how to remove it if it gets stuck? Thank you.

This message has been automatically translated
B
brianDecember 7, 2023

THE DRILL BIT IN MY BOSCH GSB 13 RE DRILL KEEPS LOOSENING ITSELF?

T
TGMarch 23, 2015

Do you have the bosch gsb 13 re switch manual?I want to repair the switch,because some part on the switch was broken.tq

P
Philip Peter WilsonMarch 15, 2024

changing motor brushes

The Bosch GSB 13 RE Professional is a drill machine designed for professionals in various industries. With its keyless chuck type, it offers convenience in changing drill bits. The drill machine has a maximum torque of 10.8 N⋅m, allowing for efficient drilling in different materials. Operating at a maximum idle speed of 2800 RPM, the drill machine can quickly and precisely penetrate surfaces. It also features adjustable speed settings, enabling users to adapt to different drilling requirements. The tool offers a reverse function, allowing users to remove screws or back out drill bits effortlessly. The Bosch GSB 13 RE Professional is equipped for hammer drilling, with an impact rate of 44800 bpm. This feature makes it suitable for both drilling and chiseling tasks in materials such as concrete. The drill machine has a maximum drilling diameter of 10 mm in steel, 13 mm in concrete, and 25 mm in wood, providing versatility for various applications. Designed with a soft grip handle, the drill machine ensures comfort and improved handling during prolonged use. Weighing 1800 g, it offers a balanced and manageable weight, reducing user fatigue. The Bosch GSB 13 RE Professional operates using an AC power source, providing a consistent and reliable power supply for uninterrupted work. With an output power of 301 W and an input power of 600 W, it delivers sufficient power for demanding drilling tasks. Crafted with the renowned Bosch quality, the GSB 13 RE Professional guarantees durability and longevity. Its sturdy construction and premium materials ensure that it can withstand challenging work environments. In conclusion, the Bosch GSB 13 RE Professional is a versatile and powerful drill machine that offers convenience, durability, and efficiency in various drilling applications.

General
BrandBosch
ModelGSB 13 RE Professional | 0 601 217 100
Productdrill machine
EAN3165140371902
LanguageEnglish
FiletypeUser manual (PDF)
Features
Chuck typeKeyless
Adjustable speedYes
ReverseYes
Hammer drillingYes
Soft gripYes
Performance
Torque (max)10.8 N⋅m
Idle speed (max)2800 RPM
Impact rate (high speed)44800 bpm
Drilling diameter in steel (max)10 mm
Drilling diameter in concrete (max)13 mm
Drilling diameter in wood (max)25 mm
Power
Output power301 W
Input power600 W
Power sourceAC
AC input voltage230 V
Weight & dimensions
Weight1800 g
show more

Can't find the answer to your question in the manual? You may find the answer to your question in the FAQs about the Bosch GSB 13 RE Professional below.

How do I remove rust from my Bosch drill machine?

1. Soak the rusty part in vinegar until completely soaked through. 2. Let the vinegar work on the rust for 24 hours. 3. Remove the rust with a wire brush or aluminium foil.

What does '16V' or '20V' mean?

The maximum achievable charge level is expressed with 16V or 20V. The V in this case stands for Volt.

Do I have to wear hearing protection when using a drill machine?

The amount of sound varies a lot per brand and type of drill machine, it is therefore wise to wear hearing protection to be sure.

What is the weight of the Bosch GSB 13 RE Professional?

The Bosch GSB 13 RE Professional has a weight of 1800 g.

How do I adjust the speed of the Bosch GSB 13 RE Professional drill machine?

The speed adjustment on the Bosch GSB 13 RE Professional is conveniently located near the trigger. Simply turn the speed control dial to increase or decrease the drilling speed according to your requirements.

How do I change the drill bit on the Bosch GSB 13 RE Professional?

Changing the drill bit on the Bosch GSB 13 RE Professional is a breeze. First, ensure the drill is switched off and unplugged. Then, using the chuck key provided, insert it into the chuck and turn it counterclockwise to loosen the jaws. Remove the previous drill bit and insert the new one, making sure it is securely in place. Finally, tighten the chuck by turning the chuck key clockwise until the drill bit is firmly held.

What is the maximum drilling capacity of the Bosch GSB 13 RE Professional?

The Bosch GSB 13 RE Professional has a maximum drilling capacity of 13 millimeters in concrete, 10 millimeters in steel, and 25 millimeters in wood. Ensure you select the appropriate drill bit and adjust the drilling speed accordingly for optimal results.

How do I switch the Bosch GSB 13 RE Professional from drilling to hammer drilling mode?

Switching between drilling and hammer drilling modes on the Bosch GSB 13 RE Professional is a simple process. Use the mode selector switch located on the top of the tool to choose between the different modes. For drilling, set the switch to the drill symbol, and for hammer drilling, set it to the hammer symbol. Always ensure the tool is switched off before changing the mode.

How do I operate the depth stop feature on the Bosch GSB 13 RE Professional?

The depth stop feature on the Bosch GSB 13 RE Professional allows you to control the drilling depth precisely. To use it, first, loosen the depth stop control ring located above the chuck. Then, adjust the desired drilling depth by moving the depth stop rod up or down. Once you have set the desired depth, tighten the control ring to secure the depth stop in place. This feature ensures consistent drilling depth for repeated tasks.

Does the Bosch GSB 13 RE Professional have a keyless chuck?

Yes, the Bosch GSB 13 RE Professional has a keyless chuck. This allows for quick and easy bit changes without the need for a key.

What is the maximum torque of the Bosch GSB 13 RE Professional?

The maximum torque of the Bosch GSB 13 RE Professional is 10.8 N⋅m. This means it can deliver a high level of force to drive screws and drill into tough materials.

Can the Bosch GSB 13 RE Professional's speed be adjusted?

Yes, the Bosch GSB 13 RE Professional has adjustable speed. This allows users to customize the drilling or driving speed to fit the task at hand.

Does the Bosch GSB 13 RE Professional have a reverse function?

Yes, the Bosch GSB 13 RE Professional has a reverse function. This enables users to easily remove screws or back out of holes without needing to manually turn the tool.

What is the maximum drilling diameter in concrete for the Bosch GSB 13 RE Professional?

The maximum drilling diameter in concrete for the Bosch GSB 13 RE Professional is 13 mm. This indicates that it is suited for drilling small to medium-sized holes in concrete surfaces.

Is the manual of the Bosch GSB 13 RE Professional available in English?

Yes, the manual of the Bosch GSB 13 RE Professional is available in English .

Is your question not listed? Ask your question here

No results