Bosch GSB 13 RE Professional manual

Bosch GSB 13 RE Professional
8.6 · 12
PDF manual
 · 71 pages
English
manualBosch GSB 13 RE Professional
繁體中文 | 37
调整旋转方向(见图片G–H)(GSB10RE/
GSB13RE/GSB16RE)
通过正逆转开关(8)可以更改电动工具的旋转方向。
按下起停开关(6)后无法更改。
正转:钻孔和旋入螺栓时,向左按压正逆转开关(8)
直至极限位置。
逆转:松开或拧出螺丝和螺母时,向右按压正逆转
开关(8)直至极限位置。
设定操作模式
钻孔和拧螺丝
将转换按钮(4)调到“钻孔”图标上。
冲击钻
将转换按钮(4)调到“冲击钻”图标上。
可感到转换按钮(4)卡止,在电机运行时
也可操纵。
接通/关闭
将电动工具投入使用时按压起停开关(6)并按住。
如需锁定被按住的起停开关(6),请按压锁定键
(5)
如需关闭电动工具,请松开起停开关(6),如果其已
被锁定键(5)锁住,请短促按压起停开关(6),然后
再松开。
调整转速/冲击次数(GSB10RE/GSB13RE/
GSB16RE)
可以无级调节已接通电动工具的转速,视按压起停
开关(6)的力道程度决定。
以较小的力按压起停开关(6)时,转速较低。逐渐在
开关上加压,转速也会跟着提高。
预选转速/冲击次数(GSB 16 RE)
利用转速预选调节轮(7)也可以在运行过程中预选所
需的转速/冲击次数。
正确的转速/冲击次数必须视加工物料和工作状况而
定,唯有实际操作才能够得到最合适的结果。
工作提示
u 在电动工具上进行所有操作之前都必须从插座上
拔出电源插头。
u 先关闭电动工具,然后再放置在螺母/螺栓上。
转的工具刀头可能会滑开。
使用低转速长时间操作之后,应该让电动工具以最
大转速空转约3分钟来帮助机器冷却。
为瓷砖钻孔时,将转换按钮(4)调到“钻孔”图标
上。瓷砖钻穿后,将转换按钮调到“冲击钻”图标
上,进行冲击钻作业。
在混凝土、石材和砖墙上钻孔时,必须使用硬金属
钻头。
在金属上钻孔时,仅可使用锋利的HSS钻头(HSS=
高速钢)。在Bosch博世的附件产品系列中,有符
合这个品质等级的产品。
可通过钻头刃磨机(附件)毫不费力地磨利直径在
2.5–10毫米的麻花钻。

维修和服务

维护和清洁
u 在电动工具上进行所有操作之前都必须从插座上
拔出电源插头。
u 电动工具和通气孔必须随时保持清洁,以确保工
作效率和工作安全。
如果必须更换连接线,务必把这项工作交给Bosch
或者经授权的Bosch电动工具顾客服务执行,以避
免危害机器的安全性能。
客户服务和应用咨询
本公司顾客服务处负责回答有关本公司产品的修
理、维护和备件的问题。备件的展开图纸和信息也
可查看:www.bosch-pt.com
博世应用咨询团队乐于就我们的产品及其附件问题
提供帮助。
询问和订购备件时,务必提供机器铭牌上标示的10
位数物品代码。
其他服务地址请见:
www.bosch-pt.com/serviceaddresses
处理废弃物
必须以符合环保要求的方式回收再利用电动工具、
附件和包装材料。
请勿将电动工具扔到生活垃圾中!
仅适用于欧盟国家:
根据废旧电气和电子设备欧洲指令2012/19/EU和转
化成的国家法律,必须将无法再使用的电动工具分
开收集并以符合环保的方式回收再利用。
繁體中文

安全注意事項

電動工具一般安全注意事項
警告
請詳讀工作臺及電動工具的所
有安全警告與使用說明。若不
遵照以下列出的指示,將可能導致電擊、著火和/
或人員重傷。
保存所有警告和說明書以備查閱。
在所有警告中,「電動工具」此一名詞泛指:以市
電驅動的(有線)電動工具或是以電池驅動的(無
線)電動工具。
工作場地的安全
u 保持工作場地清潔和明亮。混亂和黑暗的場地會
引發事故。
Bosch Power Tools 1 609 92A 5BU | (06.11.2020)

View the manual for the Bosch GSB 13 RE Professional here, for free. This manual comes under the category drill machines and has been rated by 12 people with an average of a 8.6. This manual is available in the following languages: English. Do you have a question about the Bosch GSB 13 RE Professional or do you need help? Ask your question here

Need help?

Do you have a question about the Bosch and is the answer not in the manual?

  • Receive updates on solutions
  • Get answers to your question

Question and answer

Number of questions: 5
J
Juan Manuel MassiniJuly 11, 2021

Hello, the button that changes the direction of the drill is stuck and the drill is stuck in reverse. I don't know how to fix it.

Hello, the button that changes the direction of the drill is stuck and the drill is stuck in reverse. I don't know how to fix...
zoom-in
View photo
This message has been automatically translated
K
KatiDecember 26, 2017

Hello, something curious happened to us, we cannot remove the drill bit in any way. Has this happened to anyone else? Do you know how to remove it if it gets stuck? Thank you.

This message has been automatically translated
B
brianDecember 7, 2023

THE DRILL BIT IN MY BOSCH GSB 13 RE DRILL KEEPS LOOSENING ITSELF?

T
TGMarch 23, 2015

Do you have the bosch gsb 13 re switch manual?I want to repair the switch,because some part on the switch was broken.tq

P
Philip Peter WilsonMarch 15, 2024

changing motor brushes

The Bosch GSB 13 RE Professional is a drill machine designed for professionals in various industries. With its keyless chuck type, it offers convenience in changing drill bits. The drill machine has a maximum torque of 10.8 N⋅m, allowing for efficient drilling in different materials. Operating at a maximum idle speed of 2800 RPM, the drill machine can quickly and precisely penetrate surfaces. It also features adjustable speed settings, enabling users to adapt to different drilling requirements. The tool offers a reverse function, allowing users to remove screws or back out drill bits effortlessly. The Bosch GSB 13 RE Professional is equipped for hammer drilling, with an impact rate of 44800 bpm. This feature makes it suitable for both drilling and chiseling tasks in materials such as concrete. The drill machine has a maximum drilling diameter of 10 mm in steel, 13 mm in concrete, and 25 mm in wood, providing versatility for various applications. Designed with a soft grip handle, the drill machine ensures comfort and improved handling during prolonged use. Weighing 1800 g, it offers a balanced and manageable weight, reducing user fatigue. The Bosch GSB 13 RE Professional operates using an AC power source, providing a consistent and reliable power supply for uninterrupted work. With an output power of 301 W and an input power of 600 W, it delivers sufficient power for demanding drilling tasks. Crafted with the renowned Bosch quality, the GSB 13 RE Professional guarantees durability and longevity. Its sturdy construction and premium materials ensure that it can withstand challenging work environments. In conclusion, the Bosch GSB 13 RE Professional is a versatile and powerful drill machine that offers convenience, durability, and efficiency in various drilling applications.

General
BrandBosch
ModelGSB 13 RE Professional | 0 601 217 100
Productdrill machine
EAN3165140371902
LanguageEnglish
FiletypeUser manual (PDF)
Features
Chuck typeKeyless
Adjustable speedYes
ReverseYes
Hammer drillingYes
Soft gripYes
Performance
Torque (max)10.8 N⋅m
Idle speed (max)2800 RPM
Impact rate (high speed)44800 bpm
Drilling diameter in steel (max)10 mm
Drilling diameter in concrete (max)13 mm
Drilling diameter in wood (max)25 mm
Power
Output power301 W
Input power600 W
Power sourceAC
AC input voltage230 V
Weight & dimensions
Weight1800 g
show more

Can't find the answer to your question in the manual? You may find the answer to your question in the FAQs about the Bosch GSB 13 RE Professional below.

How do I remove rust from my Bosch drill machine?

1. Soak the rusty part in vinegar until completely soaked through. 2. Let the vinegar work on the rust for 24 hours. 3. Remove the rust with a wire brush or aluminium foil.

What does '16V' or '20V' mean?

The maximum achievable charge level is expressed with 16V or 20V. The V in this case stands for Volt.

Do I have to wear hearing protection when using a drill machine?

The amount of sound varies a lot per brand and type of drill machine, it is therefore wise to wear hearing protection to be sure.

What is the weight of the Bosch GSB 13 RE Professional?

The Bosch GSB 13 RE Professional has a weight of 1800 g.

How do I adjust the speed of the Bosch GSB 13 RE Professional drill machine?

The speed adjustment on the Bosch GSB 13 RE Professional is conveniently located near the trigger. Simply turn the speed control dial to increase or decrease the drilling speed according to your requirements.

How do I change the drill bit on the Bosch GSB 13 RE Professional?

Changing the drill bit on the Bosch GSB 13 RE Professional is a breeze. First, ensure the drill is switched off and unplugged. Then, using the chuck key provided, insert it into the chuck and turn it counterclockwise to loosen the jaws. Remove the previous drill bit and insert the new one, making sure it is securely in place. Finally, tighten the chuck by turning the chuck key clockwise until the drill bit is firmly held.

What is the maximum drilling capacity of the Bosch GSB 13 RE Professional?

The Bosch GSB 13 RE Professional has a maximum drilling capacity of 13 millimeters in concrete, 10 millimeters in steel, and 25 millimeters in wood. Ensure you select the appropriate drill bit and adjust the drilling speed accordingly for optimal results.

How do I switch the Bosch GSB 13 RE Professional from drilling to hammer drilling mode?

Switching between drilling and hammer drilling modes on the Bosch GSB 13 RE Professional is a simple process. Use the mode selector switch located on the top of the tool to choose between the different modes. For drilling, set the switch to the drill symbol, and for hammer drilling, set it to the hammer symbol. Always ensure the tool is switched off before changing the mode.

How do I operate the depth stop feature on the Bosch GSB 13 RE Professional?

The depth stop feature on the Bosch GSB 13 RE Professional allows you to control the drilling depth precisely. To use it, first, loosen the depth stop control ring located above the chuck. Then, adjust the desired drilling depth by moving the depth stop rod up or down. Once you have set the desired depth, tighten the control ring to secure the depth stop in place. This feature ensures consistent drilling depth for repeated tasks.

Does the Bosch GSB 13 RE Professional have a keyless chuck?

Yes, the Bosch GSB 13 RE Professional has a keyless chuck. This allows for quick and easy bit changes without the need for a key.

What is the maximum torque of the Bosch GSB 13 RE Professional?

The maximum torque of the Bosch GSB 13 RE Professional is 10.8 N⋅m. This means it can deliver a high level of force to drive screws and drill into tough materials.

Can the Bosch GSB 13 RE Professional's speed be adjusted?

Yes, the Bosch GSB 13 RE Professional has adjustable speed. This allows users to customize the drilling or driving speed to fit the task at hand.

Does the Bosch GSB 13 RE Professional have a reverse function?

Yes, the Bosch GSB 13 RE Professional has a reverse function. This enables users to easily remove screws or back out of holes without needing to manually turn the tool.

What is the maximum drilling diameter in concrete for the Bosch GSB 13 RE Professional?

The maximum drilling diameter in concrete for the Bosch GSB 13 RE Professional is 13 mm. This indicates that it is suited for drilling small to medium-sized holes in concrete surfaces.

Is the manual of the Bosch GSB 13 RE Professional available in English?

Yes, the manual of the Bosch GSB 13 RE Professional is available in English .

Is your question not listed? Ask your question here

No results