Bosch GSB 13 RE Professional manual

Bosch GSB 13 RE Professional
8.6 · 12
PDF manual
 · 71 pages
English
manualBosch GSB 13 RE Professional
34 | 中文
中文
安全规章
电动工具通用安全警告
警告!
阅读随电动工具提供的所有安
全警告、说明、图示和规定。
不遵照以下所列说明会导致电击、着火和/或严重伤
害。
保存所有警告和说明书以备查阅。
警告中的术语“电动工具”是指市电驱动(有线)
电动工具或电池驱动(无线)电动工具。
工作场地的安全
u 保持工作场地清洁和明亮。杂乱和黑暗的场地会
引发事故。
u 不要在易爆环境,如有易燃液体、气体或粉尘的
环境下操作电动工具。 电动工具产生的火花会点
燃粉尘或气体。
u 操作电动工具时,远离儿童和旁观者。注意力不
集中会使你失去对工具的控制。
电气安全
u 电动工具插头必须与插座相配。绝不能以任何方
式改装插头。需接地的电动工具不能使用任何转
换插头。未经改装的插头和相配的插座将降低电
击风险。
u 避免人体接触接地表面,如管道、散热片和冰
箱。如果你身体接触接地表面会增加电击风险。
u 不得将电动工具暴露在雨中或潮湿环境中。水进
入电动工具将增加电击风险。
u 不得滥用软线。绝不能用软线搬运、拉动电动工
具或拔出其插头。使软线远离热源、油、锐边或
运动部件。受损或缠绕的软线会增加电击风险。
u 当在户外使用电动工具时,使用适合户外使用的
延长线。适合户外使用的电线将降低电击风险。
u 如果无法避免在潮湿的环境中操作电动工具,应
使用带有剩余电流装置(RCD)保护的电源。
RCD的使用可降低电击风险。
人身安全
u 保持警觉,当操作电动工具时关注所从事的操作
并保持清醒。当你感到疲倦,或在有药物、酒精
或治疗反应时,不要操作电动工具。在操作电动
工具时瞬间的疏忽会导致严重人身伤害。
u 使用个人防护装置。始终佩戴护目镜。防护装
置,诸如适当条件下使用防尘面具、防滑安全
鞋、安全帽、听力防护等装置能减少人身伤害。
u 防止意外起动。在连接电源和/或电池包、拿起或
搬运工具前确保开关处于关断位置。手指放在开
关上搬运工具或开关处于接通时通电会导致危
险。
u 在电动工具接通之前,拿掉所有调节钥匙或扳
手。遗留在电动工具旋转零件上的扳手或钥匙会
导致人身伤害。
u 手不要过分伸展。时刻注意立足点和身体平衡。
这样能在意外情况下能更好地控制住电动工具。
u 着装适当。不要穿宽松衣服或佩戴饰品。让你的
头发和衣服远离运动部件。宽松衣服、佩饰或长
发可能会卷入运动部件。
u 如果提供了与排屑、集尘设备连接用的装置,要
确保其连接完好且使用得当。使用集尘装置可降
低尘屑引起的危险。
u 不要因为频繁使用工具而产生的熟悉感而掉以轻
心,忽视工具的安全准则。某个粗心的动作可能
在瞬间导致严重的伤害。
电动工具使用和注意事项
u 不要勉强使用电动工具,根据用途使用合适的电
动工具。选用合适的按照额定值设计的电动工具
会使你工作更有效、更安全。
u 如果开关不能接通或关断电源,则不能使用该电
动工具。不能通过开关来控制的电动工具是危险
的且必须进行修理。
u 在进行任何调节、更换附件或贮存电动工具之
前,必须从电源上拔掉插头和/或卸下电池包(如
可拆卸)。这种防护性的安全措施降低了电动工
具意外起动的风险。
u 将闲置不用的电动工具贮存在儿童所及范围之
外,并且不允许不熟悉电动工具和不了解这些说
明的人操作电动工具。电动工具在未经培训的使
用者手中是危险的。
u 维护电动工具及其附件。检查运动部件是否调整
到位或卡住,检查零件破损情况和影响电动工具
运行的其他状况。如有损坏,应在使用前修理好
电动工具。许多事故是由维护不良的电动工具引
发的。
u 保持切削刀具锋利和清洁。维护良好地有锋利切
削刃的刀具不易卡住而且容易控制。
u 按照使用说明书,并考虑作业条件和要进行的作
业来选择电动工具、附件和工具的刀头等。将电
动工具用于那些与其用途不符的操作可能会导致
危险情况。
u 保持手柄和握持表面干燥、清洁,不得沾有油
脂。在意外的情况下,湿滑的手柄不能保证握持
的安全和对工具的控制。
维修
u 由专业维修人员使用相同的备件维修电动工具。
这将保证所维修的电动工具的安全。
电钻安全警告
适用于全部操作的安全说明
u 带耳罩进行冲击作业。暴露于噪声环境会导致失
聪。
u 使用辅助手柄。失控会造成人身伤害。
u 当在钻削附件可能触及暗线或其自身导线的场合
进行操作时,要通过绝缘握持面握持工具。钻削
附件碰到带电导线会使工具外露的金属零件带电
从而使操作者受到电击。
1 609 92A 5BU | (06.11.2020) Bosch Power Tools

View the manual for the Bosch GSB 13 RE Professional here, for free. This manual comes under the category drill machines and has been rated by 12 people with an average of a 8.6. This manual is available in the following languages: English. Do you have a question about the Bosch GSB 13 RE Professional or do you need help? Ask your question here

Need help?

Do you have a question about the Bosch and is the answer not in the manual?

  • Receive updates on solutions
  • Get answers to your question

Question and answer

Number of questions: 5
J
Juan Manuel MassiniJuly 11, 2021

Hello, the button that changes the direction of the drill is stuck and the drill is stuck in reverse. I don't know how to fix it.

Hello, the button that changes the direction of the drill is stuck and the drill is stuck in reverse. I don't know how to fix...
zoom-in
View photo
This message has been automatically translated
K
KatiDecember 26, 2017

Hello, something curious happened to us, we cannot remove the drill bit in any way. Has this happened to anyone else? Do you know how to remove it if it gets stuck? Thank you.

This message has been automatically translated
B
brianDecember 7, 2023

THE DRILL BIT IN MY BOSCH GSB 13 RE DRILL KEEPS LOOSENING ITSELF?

T
TGMarch 23, 2015

Do you have the bosch gsb 13 re switch manual?I want to repair the switch,because some part on the switch was broken.tq

P
Philip Peter WilsonMarch 15, 2024

changing motor brushes

The Bosch GSB 13 RE Professional is a drill machine designed for professionals in various industries. With its keyless chuck type, it offers convenience in changing drill bits. The drill machine has a maximum torque of 10.8 N⋅m, allowing for efficient drilling in different materials. Operating at a maximum idle speed of 2800 RPM, the drill machine can quickly and precisely penetrate surfaces. It also features adjustable speed settings, enabling users to adapt to different drilling requirements. The tool offers a reverse function, allowing users to remove screws or back out drill bits effortlessly. The Bosch GSB 13 RE Professional is equipped for hammer drilling, with an impact rate of 44800 bpm. This feature makes it suitable for both drilling and chiseling tasks in materials such as concrete. The drill machine has a maximum drilling diameter of 10 mm in steel, 13 mm in concrete, and 25 mm in wood, providing versatility for various applications. Designed with a soft grip handle, the drill machine ensures comfort and improved handling during prolonged use. Weighing 1800 g, it offers a balanced and manageable weight, reducing user fatigue. The Bosch GSB 13 RE Professional operates using an AC power source, providing a consistent and reliable power supply for uninterrupted work. With an output power of 301 W and an input power of 600 W, it delivers sufficient power for demanding drilling tasks. Crafted with the renowned Bosch quality, the GSB 13 RE Professional guarantees durability and longevity. Its sturdy construction and premium materials ensure that it can withstand challenging work environments. In conclusion, the Bosch GSB 13 RE Professional is a versatile and powerful drill machine that offers convenience, durability, and efficiency in various drilling applications.

General
BrandBosch
ModelGSB 13 RE Professional | 0 601 217 100
Productdrill machine
EAN3165140371902
LanguageEnglish
FiletypeUser manual (PDF)
Features
Chuck typeKeyless
Adjustable speedYes
ReverseYes
Hammer drillingYes
Soft gripYes
Performance
Torque (max)10.8 N⋅m
Idle speed (max)2800 RPM
Impact rate (high speed)44800 bpm
Drilling diameter in steel (max)10 mm
Drilling diameter in concrete (max)13 mm
Drilling diameter in wood (max)25 mm
Power
Output power301 W
Input power600 W
Power sourceAC
AC input voltage230 V
Weight & dimensions
Weight1800 g
show more

Can't find the answer to your question in the manual? You may find the answer to your question in the FAQs about the Bosch GSB 13 RE Professional below.

How do I remove rust from my Bosch drill machine?

1. Soak the rusty part in vinegar until completely soaked through. 2. Let the vinegar work on the rust for 24 hours. 3. Remove the rust with a wire brush or aluminium foil.

What does '16V' or '20V' mean?

The maximum achievable charge level is expressed with 16V or 20V. The V in this case stands for Volt.

Do I have to wear hearing protection when using a drill machine?

The amount of sound varies a lot per brand and type of drill machine, it is therefore wise to wear hearing protection to be sure.

What is the weight of the Bosch GSB 13 RE Professional?

The Bosch GSB 13 RE Professional has a weight of 1800 g.

How do I adjust the speed of the Bosch GSB 13 RE Professional drill machine?

The speed adjustment on the Bosch GSB 13 RE Professional is conveniently located near the trigger. Simply turn the speed control dial to increase or decrease the drilling speed according to your requirements.

How do I change the drill bit on the Bosch GSB 13 RE Professional?

Changing the drill bit on the Bosch GSB 13 RE Professional is a breeze. First, ensure the drill is switched off and unplugged. Then, using the chuck key provided, insert it into the chuck and turn it counterclockwise to loosen the jaws. Remove the previous drill bit and insert the new one, making sure it is securely in place. Finally, tighten the chuck by turning the chuck key clockwise until the drill bit is firmly held.

What is the maximum drilling capacity of the Bosch GSB 13 RE Professional?

The Bosch GSB 13 RE Professional has a maximum drilling capacity of 13 millimeters in concrete, 10 millimeters in steel, and 25 millimeters in wood. Ensure you select the appropriate drill bit and adjust the drilling speed accordingly for optimal results.

How do I switch the Bosch GSB 13 RE Professional from drilling to hammer drilling mode?

Switching between drilling and hammer drilling modes on the Bosch GSB 13 RE Professional is a simple process. Use the mode selector switch located on the top of the tool to choose between the different modes. For drilling, set the switch to the drill symbol, and for hammer drilling, set it to the hammer symbol. Always ensure the tool is switched off before changing the mode.

How do I operate the depth stop feature on the Bosch GSB 13 RE Professional?

The depth stop feature on the Bosch GSB 13 RE Professional allows you to control the drilling depth precisely. To use it, first, loosen the depth stop control ring located above the chuck. Then, adjust the desired drilling depth by moving the depth stop rod up or down. Once you have set the desired depth, tighten the control ring to secure the depth stop in place. This feature ensures consistent drilling depth for repeated tasks.

Does the Bosch GSB 13 RE Professional have a keyless chuck?

Yes, the Bosch GSB 13 RE Professional has a keyless chuck. This allows for quick and easy bit changes without the need for a key.

What is the maximum torque of the Bosch GSB 13 RE Professional?

The maximum torque of the Bosch GSB 13 RE Professional is 10.8 N⋅m. This means it can deliver a high level of force to drive screws and drill into tough materials.

Can the Bosch GSB 13 RE Professional's speed be adjusted?

Yes, the Bosch GSB 13 RE Professional has adjustable speed. This allows users to customize the drilling or driving speed to fit the task at hand.

Does the Bosch GSB 13 RE Professional have a reverse function?

Yes, the Bosch GSB 13 RE Professional has a reverse function. This enables users to easily remove screws or back out of holes without needing to manually turn the tool.

What is the maximum drilling diameter in concrete for the Bosch GSB 13 RE Professional?

The maximum drilling diameter in concrete for the Bosch GSB 13 RE Professional is 13 mm. This indicates that it is suited for drilling small to medium-sized holes in concrete surfaces.

Is the manual of the Bosch GSB 13 RE Professional available in English?

Yes, the manual of the Bosch GSB 13 RE Professional is available in English .

Is your question not listed? Ask your question here

No results