View the manual for the Bosch GSB 10 RE Professional here, for free. This manual comes under the category drill machines and has been rated by 1 people with an average of a 9.3. This manual is available in the following languages: English. Do you have a question about the Bosch GSB 10 RE Professional or do you need help? Ask your question here
The Bosch GSB 10 RE Professional is a drill machine that is designed for professional use. It is a versatile tool that can be used for a variety of drilling tasks. The drill machine features a powerful 500-watt motor, which provides sufficient power for drilling through wood, metal, and concrete. It has a variable speed control, allowing the user to adjust the speed according to the material being drilled. The Bosch GSB 10 RE Professional has a compact design, making it easy to handle and maneuver. It weighs around 1.5 kilograms, which further enhances its portability. The drill machine also features a forward/reverse rotation switch, allowing for easy screwdriving operations. It has a robust keyless chuck, which ensures quick and easy bit changes. For added convenience, the Bosch GSB 10 RE Professional is equipped with a depth stop, allowing for precise drilling depths. It also has an auxiliary handle, providing better control and stability during operation. The drill machine has a maximum drilling diameter of 10 millimeters in steel and 25 millimeters in wood. With its high drilling capacity, it is suitable for a wide range of applications, including DIY projects and professional tasks. Overall, the Bosch GSB 10 RE Professional is a reliable and durable drill machine that offers versatility and ease of use. Its power and features make it a valuable tool for any professional or DIY enthusiast.
| Brand | Bosch |
| Model | GSB 10 RE Professional |
| Product | drill machine |
| Language | English |
| Filetype | User manual (PDF) |
Can't find the answer to your question in the manual? You may find the answer to your question in the FAQs about the Bosch GSB 10 RE Professional below.
1. Soak the rusty part in vinegar until completely soaked through. 2. Let the vinegar work on the rust for 24 hours. 3. Remove the rust with a wire brush or aluminium foil.
The maximum achievable charge level is expressed with 16V or 20V. The V in this case stands for Volt.
The amount of sound varies a lot per brand and type of drill machine, it is therefore wise to wear hearing protection to be sure.
Please ensure that the drill machine is properly plugged into a functioning power outlet. Additionally, check if the power switch is in the "On" position and if the power cord is not damaged.
The Bosch GSB 10 RE Professional has a variable speed control dial located near the trigger. To select the appropriate speed, start with a lower speed setting for delicate materials and gradually increase it for harder materials. Experimenting on scrap pieces is useful to determine the optimal speed.
Ensure that the chuck is properly tightened around the drill bit. Select the correct drill bit size for the desired hole and tighten the chuck securely by turning it clockwise. Avoid excessive force while drilling, as it may cause the bit to slip.
To remove a stuck drill bit from the chuck, first, ensure the drill machine is not connected to the power source. Then, hold the chuck firmly and rotate it counterclockwise to release the bit. If it is still stuck, you can use a pair of pliers or a chuck key for additional leverage.
When drilling intensively or into hard materials, the drill can become overheated. In such cases, give the drill a rest to allow it to cool down. Check for any obstructions around the ventilation slots and clean the drill's cooling fins if necessary. Keeping the drill within its maximum drilling capacities also helps prevent overheating.
Yes, the manual of the Bosch GSB 10 RE Professional is available in English .
Is your question not listed? Ask your question here
No results
Need help?
Do you have a question about the Bosch and is the answer not in the manual?
Question and answer
Number of questions: 1How to fix chuck.it starts loosing at drilling time.
1 comment
Give answers above questions.