Bosch Greentherm T9800 SE 160/199 manual

Bosch Greentherm T9800 SE 160/199
9.7 · 1
PDF manual
 · 20 pages
English
manualBosch Greentherm T9800 SE 160/199

Greentherm T9800/9900 SE/SEO/SEi 160/199

RESIDENTIAL TANKLESS WATER HEATERS

Applications Manual

WARNING:
Follow each appliance's instructions precisely.
Installation and service must be performed by a trained and certi ed installer, service agency or
the gas supplier.
Application drawings in this manual are conceptual only and do not purport to address all design,
installation, code, or safety considerations.
The diagrams in this manual are for reference use by code of cials, designers and licensed
installers. It is expected that installers have adequate knowledge of national and local codes, as
well as accepted industry practices, and are trained on equipment, procedures, and applications
involved. Drawings are not to scale.
Refer to the appliance and accessory installation manuals for additional detailed information!

View the manual for the Bosch Greentherm T9800 SE 160/199 here, for free. This manual comes under the category water heaters & boilers and has been rated by 1 people with an average of a 9.7. This manual is available in the following languages: English. Do you have a question about the Bosch Greentherm T9800 SE 160/199 or do you need help? Ask your question here

Need help?

Do you have a question about the Bosch and is the answer not in the manual?

  • Receive updates on solutions
  • Get answers to your question

Question and answer

Number of questions: 0

The Bosch Greentherm T9800 SE 160/199 is a water heater and boiler that provides efficient and reliable hot water supply for various applications. It is specifically designed to meet the needs of residential and commercial buildings, offering a high-performance heating solution. With its compact size and lightweight design, the Bosch Greentherm T9800 SE 160/199 can be easily installed in both new and retrofit applications. It features a high-efficiency condensing technology that allows for energy savings, making it a cost-effective choice for homeowners and businesses. The water heater and boiler can provide a maximum output of 199,000 BTU per hour, ensuring a constant supply of hot water even during periods of high demand. It has a combustion efficiency of up to 98%, reducing energy waste and minimizing environmental impact. Equipped with advanced control features, the Bosch Greentherm T9800 SE 160/199 allows for precise temperature control and easy operation. It also includes safety features such as a flame sensor and a high-temperature limit switch, ensuring safe and reliable operation. The water heater and boiler is built with durable materials, guaranteeing long-lasting performance and reliability. It is designed for low NOx emissions, meeting strict environmental standards. In summary, the Bosch Greentherm T9800 SE 160/199 is a high-efficiency water heater and boiler that offers reliable hot water supply for residential and commercial applications. With its advanced features and durable construction, it provides optimal performance and energy savings.

General
BrandBosch
ModelGreentherm T9800 SE 160/199
Productwater heater & boiler
EAN052575110455
LanguageEnglish
FiletypeUser manual (PDF), Installation Guide (PDF), Brochure (PDF), Warranty information (PDF)

Can't find the answer to your question in the manual? You may find the answer to your question in the FAQs about the Bosch Greentherm T9800 SE 160/199 below.

What is the ideal room temperature?

Most people find that the ideal room temperature is between 19 and 22 degrees Celsius.

How can I troubleshoot issues with multiple tank loading installation?

To troubleshoot issues with multiple tank loading installation for the Bosch Greentherm T9800 SE 160/199 water heater & boiler, you can follow these steps: 1. Ensure that the flow through each water heater is between 3.5-5.0 gallons per minute (gpm). If the flow rate is lower, you can use an external pump to achieve the target flow rate. 2. For optimal performance, plumb the system or configure the tank to draw cold supply water into the water heater during hot water use. This helps maintain a consistent temperature. 3. Maintain a 15-degree temperature difference between the tankless set-point and the desired tank temperature. This ensures efficient operation and prevents overheating. 4. Do not use a cascading kit in a tank loading application. Cascading kits are not recommended for this setup. 5. When using multiple tankless water heaters, it is important to keep the total equivalent length of piping to each unit roughly equal. A reverse return piping scheme is recommended to equalize flow through each water heater. Please note that these troubleshooting steps are specific to the multiple tank loading installation of the Bosch Greentherm T9800 SE 160/199 water heater & boiler.

What should I do if the water heater & boiler is not working properly in a specific application?

If the Bosch Greentherm T9800 SE 160/199 water heater & boiler is not working properly in a specific application, you can follow these steps to troubleshoot the issue: 1. Check the power supply: Ensure that the water heater & boiler is receiving power and that the circuit breaker or fuse is not tripped. If necessary, reset the breaker or replace the fuse. 2. Verify the gas supply: Make sure that the gas supply to the water heater & boiler is turned on and that the gas valve is fully open. If there is a gas supply issue, contact a qualified technician to inspect and resolve the problem. 3. Check the water supply: Ensure that the water supply to the water heater & boiler is turned on and that the water pressure is within the recommended range. Low water pressure can affect the performance of the unit. 4. Inspect the venting system: Check the venting system for any obstructions or blockages that may be preventing proper exhaust. Clear any debris or obstructions and ensure that the venting system is properly installed and functioning. 5. Reset the unit: If none of the above steps resolve the issue, try resetting the water heater & boiler. Refer to the manufacturer's instructions for the specific reset procedure. If the problem persists after following these troubleshooting steps, it is recommended to contact a qualified technician or the manufacturer's customer support for further assistance.

How can I troubleshoot problems with the domestic hot water system connected to the water heater & boiler?

To troubleshoot problems with the domestic hot water system connected to the Bosch Greentherm T9800 SE 160/199 water heater & boiler, you can follow these steps: 1. Check the water supply: Ensure that the water supply to the water heater & boiler is turned on and that the water pressure is within the recommended range. Low water pressure can affect the performance of the system. 2. Verify the hot water recirculation settings: If you have a hot water recirculation system, check the settings to ensure they are configured correctly. Refer to the installation and operations manual for instructions on how to change these settings. 3. Remove debris from the plumbing: Run the system for 30 minutes to remove any debris from the plumbing. Afterward, remove the unit's inlet water filter to decrease pressure drop. If the filter contains debris, it is recommended to install a 40 mesh Y-strainer on the cold water inlet. 4. Check the recirculation system type: Determine the type of recirculation system you have. There are two basic types: a dedicated return line or a crossover valve. Ensure that the system is properly installed and functioning according to the chosen type. 5. Consider maintenance requirements: Keep in mind that domestic hot water recirculation may increase appliance operation time and maintenance requirements. Regular maintenance, such as cleaning or replacing filters, may be necessary. If the problem persists after following these troubleshooting steps, it is recommended to contact a qualified technician or the manufacturer's customer support for further assistance.

What steps should I follow to drain or pump the water heater & boiler?

To drain or pump the Bosch Greentherm T9800 SE 160/199 water heater & boiler, you can follow these steps: 1. Locate the drain valve: Identify the drain valve on the water heater & boiler. It is usually located near the bottom of the unit. 2. Prepare a drainage area: Place a suitable container or connect a hose to the drain valve to collect the water. Ensure that the drainage area can handle the volume of water being drained. 3. Open the drain valve: Carefully open the drain valve by turning it counterclockwise. This will allow the water to start draining from the unit. Make sure to control the flow of water to prevent any splashing or flooding. 4. Flush the system: If needed, you can flush the system by connecting a pump to the drain valve. This will help remove any sediment or debris from the water heater & boiler. 5. Close the drain valve: Once the water has completely drained from the unit, close the drain valve by turning it clockwise. Ensure that it is tightly closed to prevent any leaks. Please note that draining or pumping the water heater & boiler should be done with caution and following the manufacturer's instructions. If you are unsure or encounter any difficulties, it is recommended to consult a qualified technician for assistance.

What do the symbols in the diagrams of the Bosch {item_name} manual mean?

In the Bosch Greentherm T9800 SE 160/199 water heater & boiler manual, the symbols used in the diagrams have specific meanings. Here is a key to understanding these symbols: 1. Warning Triangle: This symbol indicates a warning and is printed against a grey background. It is used to identify hazardous situations that, if not avoided, could result in death or serious injury. 2. DANGER: This keyword, accompanied by the warning triangle, indicates a hazardous situation that, if not avoided, will result in death or serious injury. 3. WARNING: This keyword, accompanied by the warning triangle, indicates a hazardous situation that, if not avoided, could result in death or serious injury. 4. CAUTION: This keyword, accompanied by the warning triangle, indicates a hazardous situation that, if not avoided, could result in minor to moderate injury. 5. NOTICE: This keyword is used to address practices not related to personal injury. Additionally, the manual emphasizes the importance of reading the safety precautions before installation and using the manual in combination with the appliance installation and operation manual. Failure to follow these instructions may result in improper installation, adjustment, service, or maintenance, which could lead to fire, electrical shock, property damage, personal injury, or death. Please note that this information is based on the Bosch Greentherm T9800 SE 160/199 water heater & boiler manual.

Is the manual of the Bosch Greentherm T9800 SE 160/199 available in English?

Yes, the manual of the Bosch Greentherm T9800 SE 160/199 is available in English .

Is your question not listed? Ask your question here

No results