View the manual for the Bosch GKS 55 here, for free. This manual comes under the category saws and has been rated by 1 people with an average of a 5.8. This manual is available in the following languages: English. Do you have a question about the Bosch GKS 55 or do you need help? Ask your question here



The Bosch GKS 55 circular saw is a compact and robust tool designed for optimum handling. With an input power of 1200 watts and a maximum idle speed of 5200 RPM, this saw delivers high torque in any type of wood. The 160mm blade diameter and 20mm blade bore allow for precise and accurate cuts. Weighing 3500 grams, this saw is lightweight and easy to maneuver, making it ideal for both professional and DIY use. The punched aluminum base plate and closed pendulum guard, made of die-cast aluminum, provide durability and can withstand hard impacts. Equipped with an optimized chip deflector and turbo blower, the Bosch GKS 55 ensures a clear view of the score line for precise cut guidance. The cutting depth is 55mm at 90 degrees and 38mm at 45 degrees, allowing for versatile cutting capabilities. Powered by AC, this saw is suitable for a variety of woodworking applications. Overall, the Bosch GKS 55 circular saw offers reliability and performance in a compact and ergonomic design.
Can't find the answer to your question in the manual? You may find the answer to your question in the FAQs about the Bosch GKS 55 below.
The Bosch GKS 55 has a weight of 3500 g.
1. Wipe sawdust from the saw blade with a brush. 2. Spray the saw blade with oven cleaner and leave for 30 minutes. 3. Remove the oven cleaner and dirt with a dry cloth. 4. Grease saw blade with Vaseline.
If there is resin or other debris on the blade, it may look like the blade is blunt. If the saw blade has been thoroughly cleaned and is still blunt, it is recommended to have the saw blade sharpened.
1. Soak the rusty part in vinegar until completely soaked through. 2. Let the vinegar work on the rust for 24 hours. 3. Remove the rust with a wire brush or aluminium foil.
The maximum achievable charge level is expressed with 16V or 20V. The V in this case stands for Volt.
The amount of sound varies a lot per brand and type of saw, it is therefore wise to wear hearing protection to be sure.
The input power of the Bosch GKS 55 is 1200 W. This is a relatively high power rating, which means the saw has the ability to handle tough cutting tasks and provide efficient performance.
The idle speed (max) of the Bosch GKS 55 is 5200 RPM. This high rotational speed allows for fast and precise cutting, making it suitable for various woodworking applications.
The blade diameter of the Bosch GKS 55 is 160 mm. This size provides a good balance between cutting capacity and maneuverability, making it suitable for different cutting tasks.
The blade bore of the Bosch GKS 55 is 20 mm. This standard size allows for compatibility with a wide range of circular saw blades, giving users flexibility in choosing the right blade for their specific needs.
The power source of the Bosch GKS 55 is AC, meaning it is powered by electricity from a main power outlet. This provides consistent power supply and eliminates the need for battery changes or recharges, ensuring continuous operation without interruptions.
To adjust the cutting depth and cutting angle of the Bosch GKS 55 saw, follow these steps: 1. Adjusting the Cutting Depth: - Loosen the clamping lever located on the saw. - For a smaller cutting depth, pull the saw away from the base plate; for a larger cutting depth, push the saw toward the base plate. - Adjust the desired cutting depth using the cutting-depth scale. - Tighten the clamping lever to secure the cutting depth. - Ensure that less than a full tooth of the blade teeth is visible below the workpiece. 2. Adjusting the Cutting Angle (GKS 55+ G/GKS 55+ GCE): - Loosen the wing bolts on the saw. - Tilt the saw sidewards to the desired angle. - Adjust the measure on the scale. - Tighten the wing bolts to secure the cutting angle. 3. Adjusting the Cutting Angle (GKS 165): - Loosen the wing bolt on the saw. - Tilt the saw sidewards to the desired angle. - Adjust the setting on the scale. - Tighten the wing bolt to secure the cutting angle. Note: For bevel cuts, the cutting depth is smaller than the setting indicated on the cutting-depth scale. Remember to always ensure that the blade depth and bevel adjusting locking levers are tight and secure before making a cut.
There could be several reasons why the Bosch GKS 55 saw is not starting or switching off properly. Here are some possible causes and troubleshooting steps: 1. Power Supply: Ensure that the power cord is securely plugged into a functioning power outlet. Check if there is power supply to the outlet by testing it with another device. 2. Safety Switch: The saw is equipped with a safety switch that needs to be engaged for the saw to start. Make sure the safety switch is fully pressed or engaged before attempting to start the saw. 3. Battery (if applicable): If you are using a cordless version of the saw, check the battery level. If the battery is low or depleted, replace it with a fully charged battery. 4. Blade Binding: If the saw blade is binding or getting stuck in the material, it can prevent the saw from starting or switching off properly. Release the trigger and ensure that the blade is not engaged in the material before attempting to start or switch off the saw. 5. Mechanical Issues: If none of the above steps resolve the issue, there may be a mechanical problem with the saw. In this case, it is recommended to contact a qualified repair person or the manufacturer's customer service for further assistance. Remember to always follow safety precautions and refer to the user manual for specific instructions and guidelines when troubleshooting issues with the Bosch GKS 55 saw.
To use the Bosch GKS 55 saw effectively and safely, consider the following tips: 1. Adjusting the Cutting Depth: - Loosen the clamping lever and adjust the cutting depth according to the thickness of the workpiece. - Ensure that less than a full tooth of the blade teeth is visible below the workpiece. - Tighten the clamping lever to secure the cutting depth. 2. Adjusting the Cutting Angle: - For GKS 55+ G/GKS 55+ GCE models, loosen the wing bolts, tilt the saw sidewards, and adjust the desired measure on the scale. Then, tighten the wing bolts. - For GKS 165 model, loosen the wing bolt, tilt the saw sidewards, adjust the desired setting on the scale, and tighten the wing bolt. 3. Cutting Marks: - Use the 0° cutting mark for right-angled cuts and the 45° cutting mark for 45° cuts. - Position the circular saw against the workpiece and carry out a trial cut for precise cuts. 4. Starting and Switching Off: - Push the lock-off button for the On/Off switch and then press and hold the On/Off switch to start the saw. - Release the On/Off switch to switch off the saw. 5. Working Advice: - Protect saw blades against impact and shock. - Guide the saw evenly and with light feed in the cutting direction. - Use sharp saw blades suitable for the material being worked. - Ensure the blade depth and bevel adjusting locking levers are tight and secure before making a cut. By following these tips, you can use the Bosch GKS 55 saw effectively and safely for your cutting tasks.
When sawing wood with the Bosch GKS 55 saw, consider the following tips: 1. Blade Selection: Choose a saw blade suitable for the type and quality of the wood you are cutting. Different blades are designed for specific wood types and cutting applications. 2. Dust Extraction: Work with dust extraction to minimize health risks, especially when cutting beech and oak, as their dust can be detrimental to health. Ensure the dust extraction system is properly connected and functioning. 3. Cutting Technique: Guide the saw evenly and with light feed in the cutting direction. Avoid applying excessive force or pushing the saw too hard, as this can lead to inaccurate cuts or blade binding. 4. Cutting Marks: Use the appropriate cutting mark on the saw for right-angled cuts (0°) or 45° cuts. Position the saw against the workpiece and carry out a trial cut to ensure precision. 5. Support and Clamping: When sawing long workpieces or U-profiles, provide support to prevent blade binding and kickback. For straight cuts, use an auxiliary guide or a guide rail to ensure accurate and straight cuts. 6. Maintenance: Keep the saw blades clean and free from resin and glue residue, as these can affect the quality of cuts. Regularly clean the saw blade after use and protect it against corrosion with a thin coat of acid-free oil. By following these tips, you can achieve effective and safe wood cutting results with the Bosch GKS 55 saw.
The Bosch GKS 55 saw offers the following features and specifications: 1. Power and Performance: The saw is designed with a powerful motor that delivers high cutting performance, allowing you to tackle various cutting tasks with ease. 2. Cutting Capacity: The GKS 55 saw has a maximum cutting depth of up to 55 millimeters, making it suitable for cutting through thick materials such as wood. 3. Bevel Cutting: The saw is equipped with a bevel cutting function, allowing you to make angled cuts up to 45 degrees for more versatile cutting applications. 4. Dust Extraction: The GKS 55 saw is designed with a dust extraction system to help keep your work area clean and reduce dust accumulation, providing a clearer view of the cutting line. 5. Safety Features: The saw is equipped with safety features such as a lock-off button and a safety switch to prevent accidental starts and ensure safe operation. 6. Ergonomic Design: The GKS 55 saw is ergonomically designed with a comfortable grip and optimized weight distribution, providing better control and reducing user fatigue during extended use. Please note that the features and specifications may vary depending on the specific model of the Bosch GKS 55 saw.
Yes, the manual of the Bosch GKS 55 is available in English .
Is your question not listed? Ask your question here
No results
Need help?
Do you have a question about the Bosch and is the answer not in the manual?
Question and answer
Number of questions: 0