View the manual for the Bosch GHO 6500 Professional here, for free. This manual comes under the category planers and has been rated by 1 people with an average of a 7.5. This manual is available in the following languages: English. Do you have a question about the Bosch GHO 6500 Professional or do you need help? Ask your question here
The Bosch GHO 6500 Professional is a high-quality and reliable planer that is suitable for professional use. This planer is designed to provide precise and efficient results in woodworking applications. Featuring a powerful 650-watt motor, the Bosch GHO 6500 Professional is capable of delivering a no-load speed of up to 16,500 revolutions per minute (RPM), allowing for quick and smooth stock removal. This motor ensures consistent performance and enables the planer to handle even the toughest tasks with ease. Equipped with a 82-millimeter planing width and a maximum cutting depth of 2.6 millimeters, the Bosch GHO 6500 Professional is versatile enough to handle a wide range of planing applications. Whether you need to surface rough timber, trim doors, or create chamfers, this planer can provide the precision and finish you desire. Furthermore, the Bosch GHO 6500 Professional features a robust and durable design. It is built with high-quality materials to withstand the demands of professional use, ensuring its longevity and reliability. Additionally, the planer is also designed to be ergonomic, with a comfortable grip and a balanced weight distribution, reducing user fatigue during extended periods of use. In conclusion, the Bosch GHO 6500 Professional is a dependable and efficient planer that is suitable for professional woodworking tasks. Its powerful motor, ample planing width, and cutting depth allow for precise and quick stock removal. With its robust construction and ergonomic design, this planer is built to last and provide reliable performance for years to come.
Can't find the answer to your question in the manual? You may find the answer to your question in the FAQs about the Bosch GHO 6500 Professional below.
1. Soak the rusty part in vinegar until completely soaked through. 2. Let the vinegar work on the rust for 24 hours. 3. Remove the rust with a wire brush or aluminium foil.
To adjust the rebate depth guide on the Bosch GHO 6500 Professional planer, follow these steps: 1. Start by ensuring that the power tool is unplugged from the socket for safety. 2. Locate the rebate depth guide on the planer. It is usually labeled or marked for easy identification. 3. Depending on the specific model, there may be a fastening screw or locking nut that secures the rebate depth guide in place. Loosen this screw or nut using the appropriate tool. 4. Once the screw or nut is loosened, you can adjust the position of the rebate depth guide. Move it up or down to the desired depth. 5. After adjusting the rebate depth guide, tighten the fastening screw or nut securely to hold it in place. 6. Double-check the position of the rebate depth guide to ensure it is aligned correctly and securely fixed. 7. You can now plug in the power tool and proceed with your planing tasks, taking advantage of the adjusted rebate depth guide to achieve the desired results. Remember to always follow safety precautions and refer to the user manual for specific instructions related to your Bosch GHO 6500 Professional planer.
To troubleshoot if the parking rest on the Bosch GHO 6500 Professional planer is not functioning properly, you can follow these steps: 1. Ensure that the power tool is unplugged from the power source for safety. 2. Inspect the parking rest for any visible damage or obstructions. Clean it regularly to remove any debris or buildup that may affect its functionality. 3. Check if the parking rest is properly aligned and securely attached to the planer base plate. Tighten any loose screws or fasteners if necessary. 4. If the parking rest is not moving or folding down as intended, check for any mechanical issues. Look for any signs of wear or damage on the hinges or moving parts. 5. Lubricate the hinges and moving parts of the parking rest with a suitable lubricant to ensure smooth operation. 6. If the parking rest still does not function properly, it may require professional maintenance or repair. Contact the authorized after-sales service center for assistance. Remember to always prioritize safety and refer to the user manual for specific instructions related to your Bosch GHO 6500 Professional planer.
To replace the drive belt on the Bosch GHO 6500 Professional planer, follow these steps: 1. Ensure that the power tool is unplugged from the power source for safety. 2. Locate the screw (6) that secures the belt cover (7) and unscrew it completely. 3. Remove the belt cover (7) to access the drive belt (30). 4. Take note of the position and orientation of the old drive belt (30) before removing it. 5. Carefully remove the worn drive belt (30) from the small drive wheel (32) and the large drive belt (31). 6. Before fitting the new drive belt (30), clean the two belt wheels (31 and 32) to ensure proper operation. 7. Place the new drive belt (30) onto the small drive wheel (32) first, and then press it onto the large drive belt (31), turning it by hand. 8. Make sure that the drive belt (30) runs exactly in the length-ways grooves in the drive wheels (31 and 32). 9. Put the belt cover (7) back on and tighten the screw (6) securely. 10. Your Bosch GHO 6500 Professional planer is now ready to be used with the new drive belt. Remember to always prioritize safety and refer to the user manual for specific instructions related to your Bosch GHO 6500 Professional planer.
If the large belt wheel on the Bosch GHO 6500 Professional planer is making unusual noise, you should check the following: 1. Ensure that the power tool is unplugged from the power source for safety. 2. Inspect the large belt wheel for any visible damage or debris. Clean it thoroughly to remove any dirt or debris that may be causing the noise. 3. Check the alignment of the large belt wheel. Make sure it is properly seated and centered on its axle. 4. Inspect the drive belt for any signs of wear or damage. If the belt is worn or frayed, it may need to be replaced. 5. Check the tension of the drive belt. It should have the correct tension to ensure proper operation. Adjust the tension if necessary according to the instructions in the manual. 6. Lubricate the axle and bearings of the large belt wheel with a suitable lubricant to ensure smooth rotation. 7. After performing these checks and maintenance steps, plug in the power tool and test it to see if the unusual noise has been resolved. Remember to always prioritize safety and refer to the user manual for specific instructions related to your Bosch GHO 6500 Professional planer.
To replace the small belt wheel on the Bosch GHO 6500 Professional planer, follow these steps: 1. Ensure that the power tool is unplugged from the power source for safety. 2. Locate the screw (6) that secures the belt cover (7) and unscrew it completely. 3. Remove the belt cover (7) to access the drive belt (30) and the small belt wheel (32). 4. Take note of the position and orientation of the old small belt wheel (32) before removing it. 5. Carefully remove the old small belt wheel (32) from the axle. 6. Clean the axle and the area where the small belt wheel (32) is mounted to ensure a clean and secure fit for the new small belt wheel. 7. Place the new small belt wheel (32) onto the axle, aligning it properly. 8. Ensure that the small belt wheel (32) is securely fitted and rotates smoothly. 9. Put the belt cover (7) back on and tighten the screw (6) securely. 10. Your Bosch GHO 6500 Professional planer is now ready to be used with the new small belt wheel. Remember to always prioritize safety and refer to the user manual for specific instructions related to your Bosch GHO 6500 Professional planer.
Yes, the manual of the Bosch GHO 6500 Professional is available in English .
Is your question not listed? Ask your question here
No results
Need help?
Do you have a question about the Bosch and is the answer not in the manual?
Question and answer
Number of questions: 0