View the manual for the Bosch GHO 40-82 C Professional here, for free. This manual comes under the category planers and has been rated by 1 people with an average of a 7.7. This manual is available in the following languages: English. Do you have a question about the Bosch GHO 40-82 C Professional or do you need help? Ask your question here




| Brand | Bosch |
| Model | GHO 40-82 C Professional | 0 601 59A 76A |
| Product | planer |
| EAN | 3165140305600, 3165140619363 |
| Language | English |
| Filetype | User manual (PDF) |
| Input power | 850 W |
| Output power | 450 W |
| Power source | AC |
| Planning width (max) | 82 mm |
| Rebating depth | 24 mm |
| Idle speed | 14000 RPM |
| Vibration level | 5.5 m/s² |
| Chip thickness (max) | 4 mm |
| Product color | Black, Blue, Silver |
| Width | 169 mm |
| Depth | 296 mm |
| Height | 173 mm |
| Weight | 3200 g |
Can't find the answer to your question in the manual? You may find the answer to your question in the FAQs about the Bosch GHO 40-82 C Professional below.
The Bosch GHO 40-82 C Professional has a weight of 3200 g.
1. Soak the rusty part in vinegar until completely soaked through. 2. Let the vinegar work on the rust for 24 hours. 3. Remove the rust with a wire brush or aluminium foil.
The Bosch GHO 40-82 C Professional has a height of 173 mm.
The Bosch GHO 40-82 C Professional has a width of 169 mm.
The Bosch GHO 40-82 C Professional has a depth of 296 mm.
The input power of the Bosch GHO 40-82 C Professional is 850 W. This means that it has a relatively high power input, which allows for efficient planing and smooth operation.
The output power of the Bosch GHO 40-82 C Professional is 450 W. While this is lower than the input power, it is still a decent output power that ensures effective planing and good results.
The Bosch GHO 40-82 C Professional can handle a maximum chip thickness of 4 mm. This is a significant capacity, which means it can handle thicker materials and provide consistent planing results.
The idle speed of the Bosch GHO 40-82 C Professional is 14000 RPM. This high speed allows for fast and efficient planing, making it a suitable choice for professional users who value productivity.
The vibration level of the Bosch GHO 40-82 C Professional is 5.5 m/s². While this is not the lowest vibration level in the market, it is still within an acceptable range. Users should expect a moderate level of vibration during operation, but it should not cause excessive discomfort or fatigue.
To achieve the highest surface quality when using the Bosch GHO 40-82 C Professional planer, follow these steps: 1. Select the appropriate sanding accessory: Choose the right abrasive accessory for your specific application. Bosch offers a range of accessories for different surfaces and requirements. 2. Prepare the workpiece: Ensure that the workpiece is clean and free from any debris or contaminants that could affect the surface quality. 3. Adjust the planer settings: Set the planer to the desired depth and ensure that the blades are sharp and properly aligned. This will help to achieve a smooth and even surface. 4. Planing technique: Use a steady and consistent motion when planing the surface. Avoid applying excessive pressure, as this can result in uneven or rough surfaces. 5. Finishing touches: After planing, you may need to use sandpaper or other finishing tools to further refine the surface and achieve the desired smoothness. By following these steps, you can achieve the highest surface quality when using the Bosch GHO 40-82 C Professional planer. Remember to always refer to the manual for specific instructions and safety guidelines.
To achieve fast and inexpensive blade changes on the Bosch GHO 40-82 C Professional planer, follow these steps: 1. Ensure the planer is turned off and unplugged from the power source for safety. 2. Locate the blade release lever or mechanism on the planer. This may be located near the blade housing or on the side of the planer. 3. Activate the blade release lever or mechanism by pushing or pulling it, depending on the design. This will disengage the blade from the planer. 4. Carefully remove the old blade from the planer. Take note of the blade orientation for proper installation of the new blade. 5. Insert the new blade into the blade housing, aligning it with the guide marks or arrows provided. Ensure that the blade is securely seated in the housing. 6. Release the blade release lever or mechanism to lock the new blade in place. 7. Double-check that the blade is properly installed and securely fastened before using the planer. By following these steps, you can quickly and easily change the blades on the Bosch GHO 40-82 C Professional planer without incurring additional costs. Remember to always prioritize safety and refer to the manual for specific instructions and guidelines.
To extend the lifetime of the Bosch GHO 40-82 C Professional planer, follow these steps: 1. Proper maintenance: Regularly clean the planer after each use to remove dust, debris, and any build-up that can affect its performance. Use a soft brush or cloth to clean the exterior and a vacuum or compressed air to clean the internal components. 2. Lubrication: Apply a small amount of lubricating oil to the moving parts of the planer, such as the blade mechanism and depth adjustment mechanism. This helps reduce friction and wear, ensuring smooth operation. 3. Blade care: Keep the blades sharp and properly aligned. Regularly inspect the blades for any signs of damage or wear. Replace them when necessary to maintain optimal cutting performance. 4. Avoid overloading: Do not exceed the recommended cutting depth or force the planer to remove more material than it can handle. This can strain the motor and other components, leading to premature wear and damage. 5. Store properly: When not in use, store the planer in a clean and dry environment. Use the provided storage case or a suitable protective cover to prevent dust and moisture from accumulating. By following these steps, you can help extend the lifetime of your Bosch GHO 40-82 C Professional planer and ensure its continued performance. Remember to always prioritize safety and refer to the manual for specific instructions and guidelines.
The SDS template guides for Bosch routers are designed to enable precise template routing and tool-free mounting, ensuring efficient working. Here is some information about the SDS template guides from the manual: - The SDS template guides come in different diameters, ranging from 13mm to 40mm. - They are compatible with Bosch routers and are designed to suit them perfectly. - The guides allow for exact template routing, ensuring accurate and consistent results. - They can be easily mounted on the router without the need for additional tools. - The SDS template guides are part of the Bosch system for professional routers, which offers a range of accessories for precise working. Please note that the specific instructions for using the SDS template guides may vary. It is recommended to refer to the manual for detailed instructions and safety guidelines.
To ensure precise routing with the FSN Professional guide rails and adapter on the Bosch GHO 40-82 C Professional planer, follow these steps: 1. Choose the appropriate guide rail: Select the FSN Professional guide rail that suits your desired cutting length. Bosch offers guide rails in various lengths, such as FSN 800, FSN 1100, FSN 1600, FSN 2100, and FSN 3100. 2. Attach the guide rail to the workpiece: Place the guide rail on the workpiece, aligning it with the desired cutting line. Ensure that the guide rail is securely positioned and parallel to the cutting line. 3. Connect multiple guide rails (if needed): If you require a longer cutting length, use the FSN VEL Professional connecting piece to join multiple guide rails together. This ensures a precise and sturdy connection between the rails. 4. Mount the planer on the guide rail: Attach the planer to the guide rail using the appropriate adapter. This adapter allows the planer to glide smoothly along the guide rail, ensuring precise and straight cuts. 5. Adjust the cutting depth: Set the desired cutting depth on the planer according to your requirements. Ensure that the depth adjustment is securely locked in place. 6. Start routing: Turn on the planer and gently guide it along the guide rail, following the cutting line. The guide rail provides stability and accuracy, resulting in precise routing. By following these steps, you can achieve precise routing with the FSN Professional guide rails and adapter on the Bosch GHO 40-82 C Professional planer. Remember to always prioritize safety and refer to the manual for specific instructions and guidelines.
Yes, the manual of the Bosch GHO 40-82 C Professional is available in English .
Is your question not listed? Ask your question here
No results
Need help?
Do you have a question about the Bosch and is the answer not in the manual?
Question and answer
Number of questions: 0