Bosch GGS 27 L Professional manual

Bosch GGS 27 L Professional
7.5 · 1
PDF manual
 · 76 pages
English
manualBosch GGS 27 L Professional
Robert Bosch GmbHPower Tools Division70745 Leinfelden-EchterdingenGermanywww.bosch-pt.com1 609 929 K44 (2008.11) O / 77 ASIA

GGS Professional

7 | 7 C | 27 L | 27 LC

en Original instructionscn 正本使用说明书tw 正本使用說明書ko 사용 설명서 원본
th หนงสอคู่มือการใชงานฉบบตนแบบ
id Petunjuk-Petunjuk untuk Penggunaan Orisinal
vi Bng hõëng dÿn nguy›n bn
fr Notice originale
ar
fa

ΕΎϤϴϠόΗϞϴϐθΘϟ΍ΔϴϠλϷ΍

Ϡλ΍ έΎ ίήσ ΎϤϨϫ΍έ
OBJ_DOKU-15157-001.fm Page 1 Monday, November 10, 2008 5:24 PM

View the manual for the Bosch GGS 27 L Professional here, for free. This manual comes under the category grinders and has been rated by 1 people with an average of a 7.5. This manual is available in the following languages: English. Do you have a question about the Bosch GGS 27 L Professional or do you need help? Ask your question here

Need help?

Do you have a question about the Bosch and is the answer not in the manual?

  • Receive updates on solutions
  • Get answers to your question

Question and answer

Number of questions: 0

General
BrandBosch
ModelGGS 27 L Professional | 0 601 215 003
Productgrinder
LanguageEnglish
FiletypeUser manual (PDF)
Power
Input power500 W
Output power300 W
Power sourceAC
Performance
Idle speed (max)27000 RPM
Collet diameter (max)8 mm
Collar diameter35 mm
Other features
Maximum diameter of grinding tool- mm
Features
Product colorBlack, Blue, Silver
Weight & dimensions
Width332 mm
Height82 mm
show more

Can't find the answer to your question in the manual? You may find the answer to your question in the FAQs about the Bosch GGS 27 L Professional below.

What is the height of the Bosch GGS 27 L Professional?

The Bosch GGS 27 L Professional has a height of 82 mm.

What is the width of the Bosch GGS 27 L Professional?

The Bosch GGS 27 L Professional has a width of 332 mm.

What is the input power of the Bosch GGS 27 L Professional?

The input power of the Bosch GGS 27 L Professional is 500 W. This indicates a relatively high power input, allowing for efficient grinding and increased productivity compared to lower-powered grinders.

What is the output power of the Bosch GGS 27 L Professional?

The output power of the Bosch GGS 27 L Professional is 300 W. While this may seem lower than the input power, it is important to note that some power loss occurs during the grinding process. Overall, the output power is still sufficient for most grinding tasks.

What is the maximum idle speed of the Bosch GGS 27 L Professional?

The maximum idle speed of the Bosch GGS 27 L Professional is 27000 RPM. This high speed allows for quick material removal and smooth grinding, making it suitable for various applications.

What is the maximum collet diameter of the Bosch GGS 27 L Professional?

The maximum collet diameter of the Bosch GGS 27 L Professional is 8 mm. This means that it can accommodate grinding accessories with a maximum shaft diameter of 8 mm, providing versatility for different grinding tasks.

What is the collar diameter of the Bosch GGS 27 L Professional?

The collar diameter of the Bosch GGS 27 L Professional is 35 mm. This indicates a sturdy construction, ensuring durability and stability during use. Additionally, the larger collar diameter allows for better control and grip when operating the grinder.

How do I properly use the Bosch GGS 27 L Professional grinder for grinding and deburring metal?

To properly use the Bosch GGS 27 L Professional grinder for grinding and deburring metal, follow these steps: 1. Before starting any work on the machine, make sure to disconnect the power by pulling the mains plug. 2. Mounting the Grinding Tools: - Clean the grinder spindle and all parts to be mounted. - Hold the grinder spindle using the open-end spanner (size 17 mm). - Loosen the clamping nut by turning it counterclockwise using the open-end spanner (size 17 mm). - Insert the clamping shaft of the grinding tool into the collet chuck. - Tighten the clamping nut by turning it clockwise using the open-end spanner (size 17 mm). - Ensure that the grinding tools run concentrically. Replace any damaged or out-of-balance grinding tools. 3. Dust/Chip Extraction: - Some materials produce harmful dust, so it is important to provide good ventilation in the working area. - Consider wearing a P2 filter-class respirator for added protection. - Follow the relevant regulations in your country for working with specific materials. 4. Starting Operation: - Check the mains voltage and ensure it matches the voltage specified on the machine's nameplate. - To start the power tool, push the On/Off switch forwards. - To lock the On/Off switch, press it down at the front until it latches. - To switch off the power tool, release the On/Off switch or briefly push down the back of the switch and then release it. 5. Constant Electronic Control (GGS 27 LC): - The constant electronic control feature maintains a constant speed under load, ensuring consistent performance. 6. Speed Preselection (GGS 27 LC): - Use the thumbwheel to preselect the required speed, which depends on the material and tool diameter. - Determine the optimum speed setting through practical testing. By following these steps, you can safely and effectively use the Bosch GGS 27 L Professional grinder for grinding and deburring metal.

What should I do if the collet chuck of the Bosch GGS 27 L Professional grinder is not securely holding the grinding tool?

If the collet chuck of the Bosch GGS 27 L Professional grinder is not securely holding the grinding tool, you can follow these steps to address the issue: 1. Ensure the Power is Disconnected: - Before attempting any adjustments, make sure to disconnect the power by pulling the mains plug. 2. Check for Debris or Contamination: - Inspect the collet chuck and the grinding tool for any debris, dirt, or contamination. - Clean both the collet chuck and the grinding tool thoroughly using a soft brush or cloth. 3. Verify Proper Insertion: - Ensure that the grinding tool is inserted correctly into the collet chuck. - Insert the clamping shaft of the grinding tool fully into the collet chuck, making sure it is centered. 4. Tighten the Clamping Nut: - Use the open-end spanner (size 17 mm) to tighten the clamping nut securely. - Turn the clamping nut clockwise until it is firmly tightened. 5. Test the Secure Hold: - After tightening the clamping nut, check if the grinding tool is held securely in place. - Gently try to move the grinding tool to ensure it does not slip or come loose. If the collet chuck still does not securely hold the grinding tool after following these steps, it is recommended to contact a qualified service technician or the Bosch customer service for further assistance.

How can I adjust the speed of the Bosch GGS 27 L Professional grinder for different applications?

To adjust the speed of the Bosch GGS 27 L Professional grinder for different applications, follow these steps: 1. Before adjusting the speed, ensure that the power tool is disconnected by pulling the mains plug. 2. Locate the thumbwheel for speed preselection on the grinder. It is usually marked with numbers or symbols. 3. Turn the thumbwheel to select the desired speed setting. The speed can be preselected while the grinder is running. 4. The appropriate speed depends on the material being worked on and the diameter of the tool. It is recommended to determine the optimal speed setting through practical testing. 5. Start the grinder by pushing the On/Off switch forwards. The grinder will operate at the selected speed. 6. To switch off the grinder, release the On/Off switch or briefly push down the back of the switch and then release it. By following these steps, you can easily adjust the speed of the Bosch GGS 27 L Professional grinder to suit different applications.

What should I do if the Bosch GGS 27 L Professional grinder is not turning on when I press the on/off switch?

If the Bosch GGS 27 L Professional grinder is not turning on when you press the on/off switch, you can try the following steps to troubleshoot the issue: 1. Check the Power Supply: - Ensure that the power cord is properly connected to a functioning power outlet. - Verify that the power outlet is supplying electricity by testing it with another device. 2. Inspect the On/Off Switch: - Check if the on/off switch is in the correct position. - Make sure the switch is not stuck or damaged. - Clean the switch if there is any dirt or debris obstructing its operation. 3. Examine the Power Cord: - Inspect the power cord for any visible damage, such as cuts or frayed wires. - If the power cord is damaged, it should be replaced by a qualified technician. 4. Check the Carbon Brushes: - Carbon brushes are responsible for conducting electricity to the motor. - Inspect the carbon brushes for wear or damage. - If the brushes are worn out, they may need to be replaced. 5. Seek Professional Assistance: - If the above steps do not resolve the issue, it is recommended to contact a qualified service technician or the Bosch customer service for further assistance. By following these steps, you can troubleshoot the issue of the Bosch GGS 27 L Professional grinder not turning on.

How do I select the appropriate grinding tool diameter for the Bosch GGS 27 L Professional grinder?

To select the appropriate grinding tool diameter for the Bosch GGS 27 L Professional grinder, follow these steps: 1. Identify the Material and Application: - Determine the type of material you will be working on, such as metal, wood, or concrete. - Consider the specific application, such as grinding, deburring, or polishing. 2. Refer to the Manual or Tool Specifications: - Consult the product manual or the specifications of the grinding tools. - Look for information on the recommended grinding tool diameter for different materials and applications. 3. Consider the Compatibility: - Ensure that the grinding tool you choose is compatible with the Bosch GGS 27 L Professional grinder. - Check if the tool's shaft diameter matches the collet chuck diameter of the grinder. 4. Optimal Tool Diameter: - Select a grinding tool diameter that is suitable for your specific application and material. - The optimal diameter will depend on factors such as the surface area to be worked on and the desired result. 5. Practical Testing: - If unsure, it is recommended to perform practical testing on a small area before proceeding with the full task. - Evaluate the performance and results of the chosen grinding tool diameter. By following these steps, you can select the appropriate grinding tool diameter for the Bosch GGS 27 L Professional grinder based on the material and application requirements.

Is the manual of the Bosch GGS 27 L Professional available in English?

Yes, the manual of the Bosch GGS 27 L Professional is available in English .

Is your question not listed? Ask your question here

No results