View the manual for the Bosch GEX 150 AC Professional here, for free. This manual comes under the category sanders and has been rated by 1 people with an average of a 6.1. This manual is available in the following languages: English. Do you have a question about the Bosch GEX 150 AC Professional or do you need help? Ask your question here




The Sanders Bosch GEX 150 AC Professional is a heavy-duty orbital sander designed for professional use. Weighing 2100 grams, this sander is relatively lightweight, allowing for easy maneuverability during sanding tasks. Powered by a 340-watt motor, it provides sufficient power to tackle tough surfaces, delivering efficient sanding results. With its 4 millimeter oscillating orbit diameter and 2 millimeter eccentricity, the Bosch GEX 150 AC Professional ensures precise and even sanding. The sander's large sanding disc diameter of 150 millimeters allows for quick and efficient sanding over expansive areas. As an AC-powered tool, the Bosch GEX 150 AC Professional is compatible with a standard power source, ensuring continuous operation without the need for battery replacements or charging intervals. This makes it particularly suitable for extended periods of use, such as in professional carpentry or renovation projects. Constructed with high-quality materials, the Bosch GEX 150 AC Professional provides durability and longevity. Its robust design helps to minimize wear and tear, ensuring consistent performance over time. Additionally, its ergonomic handle design enhances comfort during operation, reducing hand fatigue and increasing overall productivity. Overall, the Bosch GEX 150 AC Professional is a reliable and powerful orbital sander suitable for professional applications. Its lightweight design, powerful motor, and large sanding disc diameter make it an efficient tool for achieving smooth and consistent sanding results.
| Brand | Bosch |
| Model | GEX 150 AC Professional | 0 601 372 768 |
| Product | sanders |
| EAN | 3165140292115, 3165140635783 |
| Language | English |
| Filetype | User manual (PDF) |
| Weight | 2100 g |
| Sanding disc diameter | 150 mm |
| Power | 340 W |
| Type of sander | Orbital sander |
| Oscillating orbit diameter | 4 mm |
| Eccentricity | 2 mm |
| Weight | 2100 g |
| Power | 340 W |
| Power source | AC |
Can't find the answer to your question in the manual? You may find the answer to your question in the FAQs about the Bosch GEX 150 AC Professional below.
The maximum achievable charge level is expressed with 16V or 20V. The V in this case stands for Volt.
The Bosch GEX 150 AC Professional has a weight of 2100 g.
To change the sanding sheet on the Bosch GEX 150 AC Professional, simply press the sanding plate downwards with one hand to release the tension, then slide off the old sheet and carefully align and attach a new sheet onto the plate.
The sanding speed on the Bosch GEX 150 AC Professional can be adjusted by rotating the numbered speed dial located on the side of the tool's handle. Turn it clockwise to increase the speed and counterclockwise to decrease it, enabling you to find the optimal sanding speed for your specific task.
If the sanding pad on your Bosch GEX 150 AC Professional doesn't spin, ensure that the power cord is properly connected and the switch is in the "on" position. Additionally, check if there is any debris or sanding dust accumulated around the pad, as this may cause it to stop spinning. Clean any obstructions and try again.
Excessive vibrations during sanding with the Bosch GEX 150 AC Professional can be minimized by ensuring that the sanding pad is properly attached and aligned. Additionally, make sure you are using the appropriate sanding sheet for the desired application. Uneven pressure or excessive force can also cause vibrations, so try to maintain a consistent and steady hand while operating the tool.
Yes, you can connect a vacuum cleaner to the Bosch GEX 150 AC Professional for efficient dust extraction. The sander has a built-in vacuum cleaner adapter, usually located at the rear, where you can attach a standard vacuum hose. This helps to keep your work area clean and improves visibility while sanding.
The power of the Bosch GEX 150 AC Professional is 340 Watts. This is a moderate power level for an orbital sander and should provide sufficient performance for most sanding tasks.
The Bosch GEX 150 AC Professional is an orbital sander. This type of sander is known for its random orbital motion, which helps to prevent swirl marks and provides a more even sanding result.
The sanding disc diameter on the Bosch GEX 150 AC Professional is 150 mm. This is a standard size for orbital sanders and allows for efficient sanding over larger surface areas.
The oscillating orbit diameter of the Bosch GEX 150 AC Professional is 4 mm. This means that the sanding pad moves in a circular motion with a diameter of 4 mm, which helps to achieve a smooth and consistent sanding result.
The power source of the Bosch GEX 150 AC Professional is AC, which means it needs to be plugged into a power outlet. This provides a continuous power supply and eliminates the need for recharging or replacing batteries.
Yes, the manual of the Bosch GEX 150 AC Professional is available in English .
Is your question not listed? Ask your question here
No results
Need help?
Do you have a question about the Bosch and is the answer not in the manual?
Question and answer
Number of questions: 0