View the manual for the Bosch GEX 125-1 AE Professional here, for free. This manual comes under the category sanders and has been rated by 6 people with an average of a 8.5. This manual is available in the following languages: English. Do you have a question about the Bosch GEX 125-1 AE Professional or do you need help? Ask your question here

| Brand | Bosch |
| Model | GEX 125-1 AE Professional | 0 601 387 501 |
| Product | sanders |
| EAN | 3165140438278, 3165140438285 |
| Language | English |
| Filetype | User manual (PDF) |
| Weight | 1300 g |
| Sanding plate size (WxD) | 125 x 125 mm |
| Sanding disc diameter | 125 mm |
| Width | 240 mm |
| Depth | 160 mm |
| Height | 135 mm |
| Type of sander | Orbital sander |
| Product color | Blue |
| Adjustable speed | - |
| Output power | 250 W |
| Power source | AC |
| Idle speed (max) | 12000 RPM |
| Oscillating orbit diameter | 2.5 mm |
| Idle oscillation rate (min) | 15000 OPM |
| Idle oscillation rate (max) | 24000 OPM |
| Eccentricity | 1.25 mm |
| Idle speed (min) | 7500 RPM |
| 24000 |
Can't find the answer to your question in the manual? You may find the answer to your question in the FAQs about the Bosch GEX 125-1 AE Professional below.
The maximum achievable charge level is expressed with 16V or 20V. The V in this case stands for Volt.
The Bosch GEX 125-1 AE Professional has a weight of 1300 g.
The Bosch GEX 125-1 AE Professional has a height of 135 mm.
The Bosch GEX 125-1 AE Professional has a width of 240 mm.
The Bosch GEX 125-1 AE Professional has a depth of 160 mm.
The power source of the Bosch GEX 125-1 AE Professional is AC, meaning it needs to be plugged into an electrical outlet to function.
The output power of the Bosch GEX 125-1 AE Professional is 250 Watts, providing sufficient power for various sanding tasks.
The sanding plate size of the Bosch GEX 125-1 AE Professional is 125 x 125 mm, which offers a decent-sized surface area for effective sanding.
The Bosch GEX 125-1 AE Professional has an idle speed range from 7500 RPM to 12000 RPM, allowing users to adjust the speed based on their specific sanding needs.
The Bosch GEX 125-1 AE Professional has an oscillating orbit diameter of 2.5 mm, providing a balanced and precise sanding motion for smoother results.
To prevent the sanding sheet from slipping during rough sanding with the Bosch GEX 125-1 AE Professional sander, follow these steps: 1. Use the adjustment aid: The manual suggests using the adjustment aid provided in the tool case. Place the sanding sheet into the adjustment aid with the Velcro facing upward. Firmly push the machine with the sanding plate to ensure a secure attachment. 2. Choose the right sanding sheet: Depending on the material you are working on and the desired rate of material removal, different sanding sheets are available. For rough sanding, use a sanding sheet with a coarse grain (40 or 60). 3. Apply light pressure: During rough sanding, it is important to apply only light pressure to the machine. This allows it to run at a high speed, ensuring effective material removal without causing the sanding sheet to slip. By following these steps, you can ensure that the sanding sheet remains securely attached to the Bosch GEX 125-1 AE Professional sander during rough sanding, allowing you to achieve optimal results.
To ensure smooth rotation of the sanding plate during fine sanding with the Bosch GEX 125-1 AE Professional sander, follow these steps: 1. Attach a sanding sheet with fine grain: Choose a sanding sheet with a fine grain for fine sanding. This will help achieve a smooth finish. 2. Vary the application pressure or speed stage: By lightly varying the application pressure or changing the speed stage (GEX 125-1 AE), you can reduce the sanding plate speed while maintaining the orbital action. This adjustment can help improve the smoothness of the rotation. 3. Use moderate pressure: Apply moderate pressure to the machine while sanding. Avoid applying excessive pressure, as this can hinder the smooth rotation of the sanding plate. 4. Move the machine in a circular or alternating pattern: When sanding, move the machine in a circular pattern or alternately in lengthwise and crosswise directions over the workpiece. This movement helps distribute the sanding action evenly and promotes smooth rotation. 5. Avoid tilting the machine: To prevent sanding through the workpiece, especially when working with veneer, avoid tilting the machine. Keep it level and maintain a consistent sanding motion. By following these steps, you can ensure that the sanding plate rotates smoothly during fine sanding with the Bosch GEX 125-1 AE Professional sander, resulting in a high-quality finish.
If the polishing accessory is not providing the desired results with the Bosch GEX 125-1 AE Professional sander, you can try the following steps: 1. Select the appropriate polishing accessory: Ensure that you are using the correct polishing accessory for the specific task. Bosch provides various polishing accessories such as lamb's wool bonnets, polishing felt, or sponges. Choose the accessory that is suitable for the material and surface you are working on. 2. Adjust the speed setting: The GEX 125-1 AE model allows you to adjust the speed stage. For polishing, select a low speed setting (stage 1-2) to avoid excessive heating of the surface. Adjusting the speed can help achieve better polishing results. 3. Apply moderate pressure: When polishing, apply moderate pressure to the machine. Avoid using excessive force, as this can lead to uneven polishing or damage to the surface. Apply the polishing agent crosswise or in a circular motion with a polishing sponge, and use moderate pressure. 4. Allow the surface to dry lightly: After applying the polishing agent, allow it to dry lightly before proceeding with the polishing process. This can help enhance the effectiveness of the polishing and achieve the desired results. 5. Clean the polishing accessories regularly: To maintain good polishing results, clean the polishing accessories regularly. Wash them with a mild detergent and warm water, avoiding the use of paint thinner. Cleaning the accessories ensures optimal performance and extends their lifespan. By following these steps, you can troubleshoot and improve the results when using the polishing accessory with the Bosch GEX 125-1 AE Professional sander.
To ensure optimal performance and prevent overheating of the Bosch GEX 125-1 AE Professional sander, it is recommended to clean the ventilation slots regularly. Follow these steps to clean the ventilation slots: 1. Power off and unplug the sander: Before cleaning the ventilation slots, make sure the sander is powered off and unplugged from the power source. This ensures your safety during the cleaning process. 2. Use a soft brush or compressed air: Gently brush or blow compressed air into the ventilation slots to remove any dust or debris that may have accumulated. Be careful not to apply excessive force or damage the slots. 3. Check for blockages: Inspect the ventilation slots for any blockages or obstructions. If you notice any debris or buildup that cannot be removed with a brush or compressed air, use a small tool, such as a toothpick or a soft cloth, to carefully remove the blockage. 4. Repeat cleaning as needed: Depending on the frequency and intensity of use, you may need to clean the ventilation slots more frequently. Regularly check the slots for any dust or debris buildup and clean as necessary. By following these steps and cleaning the ventilation slots regularly, you can ensure proper airflow and prevent overheating of the Bosch GEX 125-1 AE Professional sander, prolonging its lifespan and maintaining optimal performance.
If the new sanding plate is not engaging properly with the drive element of the Bosch GEX 125-1 AE Professional sander, you can try the following steps to resolve the issue: 1. Power off and unplug the sander: Before attempting any adjustments, ensure that the sander is powered off and unplugged from the power source. This is important for your safety. 2. Remove the sanding plate: Unscrew the screws that hold the sanding plate in place and carefully remove the old sanding plate from the drive element. 3. Inspect the drive element and sanding plate: Check the drive element and the new sanding plate for any visible damage or debris that may be preventing proper engagement. Clean both the drive element and the sanding plate if necessary. 4. Align the sanding plate properly: Place the new sanding plate onto the drive element, ensuring that the toothing of the drive element engages into the openings of the sanding plate. Make sure the sanding plate is aligned correctly and sits flush against the drive element. 5. Secure the sanding plate: Once the sanding plate is properly aligned, tighten the screws to secure it in place. Ensure that the screws are tightened evenly to prevent any misalignment. By following these steps, you can troubleshoot and resolve the issue of the new sanding plate not engaging properly with the drive element of the Bosch GEX 125-1 AE Professional sander, ensuring smooth operation and effective sanding.
Yes, the manual of the Bosch GEX 125-1 AE Professional is available in English .
Is your question not listed? Ask your question here
No results
Need help?
Do you have a question about the Bosch and is the answer not in the manual?
Question and answer
Number of questions: 0