Bosch GET 75-150 Professional manual

Bosch GET 75-150 Professional
7.5 · 1
PDF manual
 · 197 pages
English
manualBosch GET 75-150 Professional
Robert Bosch Power Tools GmbH
70538 Stuttgart
GERMANY
www.bosch-pt.com
1 609 92A 5FZ (2020.01) O / 198
de Originalbetriebsanleitung
en Original instructions
fr Notice originale
es Manual original
pt Manual original
it Istruzioni originali
nl Oorspronkelijke gebruiksaanwijzing
da Original brugsanvisning
sv Bruksanvisning i original
no Original driftsinstruks
fi Alkuperäiset ohjeet
el Πρωτότυπο οδηγιών χρήσης
tr Orijinal işletme talimatı
pl Instrukcja oryginalna
cs Původní návod k používání
sk Pôvodný návod na použitie
hu Eredeti használati utasítás
ru Оригинальное руководство по
эксплуатации
uk Оригінальна інструкція з
експлуатації
kk Пайдалану нұсқаулығының
түпнұсқасы
ro Instrucțiuni originale
bg Оригинална инструкция
mk Оригинално упатство за работа
sr Originalno uputstvo za rad
sl Izvirna navodila
hr Originalne upute za rad
et Algupärane kasutusjuhend
lv Instrukcijas oriģinālvalodā
lt Originali instrukcija
ko 사용 설명서 원본
ar   
fa   
1 609 92A 5FZ

GET Professional

75-150 | 55-125

View the manual for the Bosch GET 75-150 Professional here, for free. This manual comes under the category sanders and has been rated by 1 people with an average of a 7.5. This manual is available in the following languages: English. Do you have a question about the Bosch GET 75-150 Professional or do you need help? Ask your question here

Need help?

Do you have a question about the Bosch and is the answer not in the manual?

  • Receive updates on solutions
  • Get answers to your question

Question and answer

Number of questions: 0

The Bosch GET 75-150 professional sanders features an adjustable speed setting, with a power output of 750 watts and an AC input voltage of 230 volts. The sanding disc diameter is 150 millimeters, providing a wide surface area for sanding tasks. The idle speed ranges from 3300 to 7300 revolutions per minute, while the idle oscillation rate varies from 6600 to 14600 oscillations per minute. With an eccentricity of 2.25 millimeters, this sander ensures precise and efficient sanding. The sanding media fixing mechanism utilizes Velcro for easy attachment and removal of sanding pads. Powered by AC, this sander weighs 2600 grams, making it relatively lightweight and easy to maneuver during operation. The dimensions of the sander are as follows: width 140 millimeters, depth 381 millimeters, and height 161 millimeters. The Bosch GET 75-150 professional sander is designed to provide high-quality sanding performance for professional applications, with a robust construction that ensures durability and long-term reliability.

General
BrandBosch
ModelGET 75-150 Professional | 0 601 257 131
Productsanders
EAN3165140835107
LanguageEnglish
FiletypeUser manual (PDF)
Features
Adjustable speedYes
Sanding media fixingVelcro
Type of sanderOrbital sander
Product colorBlack, Blue
Dust extraction portYes
Other features
Power750 W
Hose connectionYes
On/off switchYes
Uncertainty K1.5 m/s²
Power
AC input voltage230 V
Power sourceAC
Cable length4 m
Weight & dimensions
Sanding disc diameter150 mm
Weight2600 g
Width140 mm
Depth381 mm
Height161 mm
Performance
Idle speed (min)3300, 290 RPM
Idle speed (max)7300, 640 RPM
Idle oscillation rate (min)6600 OPM
Idle oscillation rate (max)14600 OPM
Eccentricity2.25 mm
Oscillating orbit diameter4.5 mm
Sound pressure level85 dB
Sound power level96 dB
Sound level uncertainty3 dB
Packaging content
Carrying caseYes
Sandpaper includedYes
Auxiliary handleYes
show more

Can't find the answer to your question in the manual? You may find the answer to your question in the FAQs about the Bosch GET 75-150 Professional below.

What does '16V' or '20V' mean?

The maximum achievable charge level is expressed with 16V or 20V. The V in this case stands for Volt.

What is the weight of the Bosch GET 75-150 Professional?

The Bosch GET 75-150 Professional has a weight of 2600 g.

What is the height of the Bosch GET 75-150 Professional?

The Bosch GET 75-150 Professional has a height of 161 mm.

What is the width of the Bosch GET 75-150 Professional?

The Bosch GET 75-150 Professional has a width of 140 mm.

What is the depth of the Bosch GET 75-150 Professional?

The Bosch GET 75-150 Professional has a depth of 381 mm.

Does the Bosch GET 75-150 Professional have adjustable speed?

Yes, the Bosch GET 75-150 Professional has adjustable speed. This allows the user to customize the sanding process based on the task at hand, providing greater control and precision.

What is the power of the Bosch GET 75-150 Professional?

The power of the Bosch GET 75-150 Professional is 750 W. This high power rating ensures efficient and effective sanding, making it suitable for both light and heavy-duty tasks.

What is the sanding disc diameter of the Bosch GET 75-150 Professional?

The sanding disc diameter of the Bosch GET 75-150 Professional is 150 mm. This size offers a larger sanding surface area, allowing for quicker completion of sanding projects.

Does the Bosch GET 75-150 Professional come with a carrying case?

Yes, the Bosch GET 75-150 Professional comes with a carrying case. This provides convenient storage and transportation of the sander, ensuring its protection and easy accessibility.

Is sandpaper included with the Bosch GET 75-150 Professional?

Yes, sandpaper is included with the Bosch GET 75-150 Professional. This saves the user from having to purchase sandpaper separately, making it a cost-effective choice for sanding needs.

How do I change the sanding sheet on the Bosch GET 75-150 Professional sander?

To change the sanding sheet on the Bosch GET 75-150 Professional sander, follow these steps: 1. Ensure that the power tool is unplugged before starting any work. 2. Lift the sanding sheet from the side and pull it away from the sanding pad. 3. Before attaching a new sanding sheet, remove any dirt or dust from the sanding pad using a paintbrush or similar tool. 4. The sanding pad is equipped with a hook-and-loop fastening system, which allows for quick and easy attachment of sanding sheets with a hook-and-loop backing. 5. Align the holes in the sanding sheet with the drilled holes in the sanding pad to ensure optimum dust extraction. 6. Press the sanding sheet firmly onto the underside of the sanding pad, making sure it is securely attached. 7. If the sanding pad itself needs to be replaced, unscrew the screw holding it in place and remove the old pad. 8. Attach the new sanding pad and tighten the screw until it is finger-tight. Be careful not to overtighten. 9. For pads with different diameters, ensure that the correct pad is fitted to the right power tool. 10. Damaged sanding pads should only be replaced by an authorized after-sales service center. Remember to always follow safety precautions and refer to the manual for detailed instructions.

What are the noise emission values and vibration levels of the Bosch GET 75-150 Professional sander?

The noise emission values and vibration levels of the Bosch GET 75-150 Professional sander are as follows: - Noise emission values: - A-weighted noise level: Typically, the sound pressure level is 85 dB(A) and the sound power level is 96 dB(A). - Uncertainty: The uncertainty value is 3 dB. - Vibration levels: - Grinding (Normal mode): The vibration total value is 5.5 m/s² and the uncertainty value is 1.5 m/s². - Grinding (Turbo mode): The vibration total value is 6.0 m/s² and the uncertainty value is 1.5 m/s². - Polishing: The vibration total value is 7.5 m/s² and the uncertainty value is 1.5 m/s². Please note that these values have been measured according to standardized procedures and can be used to compare power tools. However, the actual vibration and noise emissions may vary depending on the specific application and maintenance of the tool. It is important to implement additional safety measures, such as servicing the power tool, keeping hands warm, and organizing workflows correctly, to protect the operator from the effects of vibration. For more detailed information, please refer to the manual.

How do I assemble the Bosch GET 75-150 Professional sander?

To assemble the Bosch GET 75-150 Professional sander, follow these steps: 1. Ensure that the power tool is unplugged before starting any assembly work. 2. Attach the auxiliary handle to the designated position on the sander body. Make sure it is securely fastened. 3. Align the dust extraction port on the sander with the dust bag or a suitable dust extraction system. Ensure a proper connection to minimize dust during operation. 4. If using a vacuum cleaner for dust extraction, connect the vacuum hose to the dust extraction port. 5. Check the power cord for any damage or wear. If necessary, replace the power cord following the manufacturer's instructions. 6. Insert the sanding sheet with the desired grit onto the sanding pad. Ensure that the holes in the sanding sheet align with the holes in the sanding pad for effective dust extraction. 7. If using a sanding disc, attach it securely to the sanding pad using the hook-and-loop fastening system. 8. Inspect the tool for any loose screws or parts. Tighten them if necessary. 9. Before operating the sander, refer to the manual for safety instructions, proper usage, and maintenance guidelines. Remember to always prioritize safety and refer to the manual for detailed instructions specific to the Bosch GET 75-150 Professional sander.

What are the specifications of the Bosch GET 75-150 Professional sander, such as the no-load speed and weight?

The specifications of the Bosch GET 75-150 Professional sander are as follows: - No-load speed: The no-load speed of the sander is not available. - Weight: The weight of the sander is not available. Please note that the specific values for the no-load speed and weight of the Bosch GET 75-150 Professional sander could not be found. It is recommended to refer to the manual or contact the manufacturer for accurate and detailed specifications of the product.

Where can I find general information about Bosch power tools, including contact information?

You can find general information about Bosch power tools, including contact information, in the manual of the Bosch GET 75-150 Professional sander. Here are the steps to access this information: 1. Open the manual of the Bosch GET 75-150 Professional sander. 2. Look for the section titled "Product Description and Specifications" or a similar heading. 3. Within this section, you will find general information about the power tool, including its features and specifications. 4. Look for any subsections or paragraphs that provide details about Bosch power tools in general. This may include information about the company, its history, and its commitment to quality. 5. To find contact information, refer to the manual's table of contents or index. Look for a section specifically dedicated to contact details or customer support. 6. In this section, you should find phone numbers, email addresses, or other means of contacting Bosch for inquiries, support, or assistance with their power tools. Please note that the specific location of the information may vary depending on the manual's layout and organization.

Is the manual of the Bosch GET 75-150 Professional available in English?

Yes, the manual of the Bosch GET 75-150 Professional is available in English .

Is your question not listed? Ask your question here

No results