Bosch GCM 800 SJ manual

Bosch GCM 800 SJ
7.5 · 2
PDF manual
 · 306 pages
English
manualBosch GCM 800 SJ
Robert Bosch Power Tools GmbH
70538 Stuttgart
GERMANY
www.bosch-pt.com
1 609 92A 3BW (2017.06) PS / 307

GCM Professional

80 SJ | 800 SJ | 8000 SJ

de Originalbetriebsanleitung
en Original instructions
fr Notice originale
es Manual original
pt Manual original
it Istruzioni originali
nl Oorspronkelijke
gebruiksaanwijzing
da Original brugsanvisning
sv Bruksanvisning i original
no Original driftsinstruks
fi Alkuperäiset ohjeet
el Πρωτότυπο οδηγιών χρήσης
tr Orijinal işletme talimatı
pl Instrukcja oryginalna
cs Původní návod k používání
sk Pôvodný návod na použitie
hu Eredeti használati utasítás
ru Оригинальное руководство по
эксплуатации
uk Оригінальна інструкція з
експлуатації
kk Пайдалану нұсқаулығының
түпнұсқасы
ro Instrucţiuni originale
bg Оригинална инструкция
mk Оригинално упатство за работа
sr Originalno uputstvo za rad
sl Izvirna navodila
hr Originalne upute za rad
et Algupärane kasutusjuhend
lv Instrukcijas oriģinālvalodā
lt Originali instrukcija
ar
fa
ςТЎϩХʉ ЌТϾϦφЍʉ ʌμВТЎϺυ
ΖЎϩʉ ˒μВЖЙʉʓ ИͳϞφЁʑ
OBJ_BUCH-2154-004.book Page 1 Wednesday, June 14, 2017 5:06 PM

View the manual for the Bosch GCM 800 SJ here, for free. This manual comes under the category saws and has been rated by 2 people with an average of a 7.5. This manual is available in the following languages: English. Do you have a question about the Bosch GCM 800 SJ or do you need help? Ask your question here

Need help?

Do you have a question about the Bosch and is the answer not in the manual?

  • Receive updates on solutions
  • Get answers to your question

Question and answer

Number of questions: 1
B
Ben TrompApril 18, 2023

How to adjust and set the height of the cutting blade ?

The Bosch GCM 800 SJ is a saw designed for woodworking applications. With a powerful 1400 W input power, this saw delivers reliable performance for various cutting tasks. The spindle lock feature allows for easy and quick blade changes, enhancing efficiency and convenience. With an idle speed of up to 5500 RPM, the Bosch GCM 800 SJ ensures smooth and precise cuts. Its blade diameter of 216 mm and blade bore of 30 mm provide a balance between cutting capacity and stability. The cutting capacity at 0° is 70 x 270 centimeters, allowing for sizable cuts in both width and length. At a 45° mitre setting, the cutting capacity is 70 x 190 centimeters, enabling flexibility in angled cuts. Additionally, the saw offers a cutting capacity of 48 x 270 centimeters at a 45° incline, further expanding its versatility. The mitre setting can be adjusted up to 47° on both the left and right sides, enabling precise angled cuts. Furthermore, the bevel setting allows for a 45° tilt to the left, while remaining at 0° on the right. Weighing 13500 grams and measuring 630 millimeters in height, the Bosch GCM 800 SJ is a relatively portable saw suitable for various job sites. It is powered by an AC source, ensuring consistent power supply during operation. Overall, the Bosch GCM 800 SJ is a high-quality saw with desirable features such as a spindle lock, adjustable mitre and bevel settings, and a solid cutting capacity. Its performance and versatility make it a reliable choice for woodworking enthusiasts and professionals alike.

General
BrandBosch
ModelGCM 800 SJ | 0 601 B19 030
Productsaw
EAN3165140654272
LanguageEnglish
FiletypeUser manual (PDF)
Features
Spindle lockYes
Performance
Idle speed (max)5500 RPM
Miter setting (left)47 °
Miter setting (right)47 °
Bevel setting (left)45 °
Bevel setting (right)0 °
Power
Input power1400 W
Power sourceAC
Packaging content
Blade diameter216 mm
Blade bore30 mm
Other features
Cutting capacity 0°70 x 270 mm
Cutting capacity 45° miter70 x 190 mm
Cutting capacity 45° incline48 x 270 mm
Weight & dimensions
Weight13500 g
Height630 mm
show more

Can't find the answer to your question in the manual? You may find the answer to your question in the FAQs about the Bosch GCM 800 SJ below.

What is the weight of the Bosch GCM 800 SJ?

The Bosch GCM 800 SJ has a weight of 13500 g.

What is the best way to clean my saw blade?

1. Wipe sawdust from the saw blade with a brush. 2. Spray the saw blade with oven cleaner and leave for 30 minutes. 3. Remove the oven cleaner and dirt with a dry cloth. 4. Grease saw blade with Vaseline.

My saw blade is blunt. What now?

If there is resin or other debris on the blade, it may look like the blade is blunt. If the saw blade has been thoroughly cleaned and is still blunt, it is recommended to have the saw blade sharpened.

How do I remove rust from my Bosch saw?

1. Soak the rusty part in vinegar until completely soaked through. 2. Let the vinegar work on the rust for 24 hours. 3. Remove the rust with a wire brush or aluminium foil.

What does '16V' or '20V' mean?

The maximum achievable charge level is expressed with 16V or 20V. The V in this case stands for Volt.

Do I have to wear hearing protection when using a saw?

The amount of sound varies a lot per brand and type of saw, it is therefore wise to wear hearing protection to be sure.

What is the height of the Bosch GCM 800 SJ?

The Bosch GCM 800 SJ has a height of 630 mm.

How do I adjust the bevel angle on my Bosch GCM 800 SJ?

To adjust the bevel angle on your Bosch GCM 800 SJ, locate the bevel angle adjustment knob on the front of the saw. Turn the knob counterclockwise to unlock it, then tilt the saw blade to the desired angle. Finally, turn the knob clockwise to lock it in place.

How can I change the blade on my Bosch GCM 800 SJ?

To change the blade on your Bosch GCM 800 SJ, first, disconnect the saw from the power source. Use the included wrench to loosen the blade nut by turning it counterclockwise. Once loose, remove the blade and replace it with a new one, ensuring the teeth are facing in the correct direction. Tighten the blade nut securely with the wrench.

What should I do if the blade is not aligned properly with the cutting line?

If the blade on your Bosch GCM 800 SJ is not aligned correctly with the cutting line, you can adjust the saw's cutting alignment. First, disconnect the saw from the power source. Locate the bevel angle adjustment knob and adjust it until the blade is aligned with the desired cutting line. Then, tighten the knob to lock the adjustment in place.

How do I adjust the cutting depth on my Bosch GCM 800 SJ?

To adjust the cutting depth on your Bosch GCM 800 SJ, locate the cutting depth adjustment knob near the front of the saw. Turn this knob counterclockwise to lower the blade and increase the cutting depth. Conversely, turn it clockwise to raise the blade and decrease the cutting depth. Ensure the knob is tightened securely to maintain the chosen cutting depth.

What should I do if the motor of my Bosch GCM 800 SJ overheats?

If the motor of your Bosch GCM 800 SJ overheats, it may be due to heavy or continuous use. Allow the saw to rest and cool down for a while before using it again. Ensure there is proper ventilation around the motor and clean any sawdust or debris that may be blocking the cooling vents. Avoid overloading the saw with excessive force or cutting material that exceeds the recommended capacity to prevent overheating in the future.

Does the Bosch GCM 800 SJ have a spindle lock?

Yes, the Bosch GCM 800 SJ has a spindle lock. This allows for easy and quick blade changes, increasing convenience for the user.

What is the idle speed (max) of the Bosch GCM 800 SJ?

The idle speed (max) of the Bosch GCM 800 SJ is 5500 RPM. This high speed ensures efficient and smooth cutting, making it suitable for various applications.

What is the input power of the Bosch GCM 800 SJ?

The input power of the Bosch GCM 800 SJ is 1400 W. This indicates a high power output, making it capable of handling tough and demanding cutting tasks.

What is the blade diameter of the Bosch GCM 800 SJ?

The blade diameter of the Bosch GCM 800 SJ is 216 mm. This size of the blade allows for precise and accurate cuts, ensuring a professional finish.

What is the cutting capacity at 0° of the Bosch GCM 800 SJ?

The cutting capacity at 0° of the Bosch GCM 800 SJ is 70 x 270 mm. This wide cutting capacity enables the user to work with larger workpieces, increasing versatility and productivity.

Is the manual of the Bosch GCM 800 SJ available in English?

Yes, the manual of the Bosch GCM 800 SJ is available in English .

Is your question not listed? Ask your question here

No results