View the manual for the Bosch GCM 8 SJL Professional here, for free. This manual comes under the category saws and has been rated by 1 people with an average of a 9.5. This manual is available in the following languages: English. Do you have a question about the Bosch GCM 8 SJL Professional or do you need help? Ask your question here




The Bosch GCM 8 SJL Professional is a saw with a width of 910 millimeters, a depth of 960 millimeters, and a height of 410 millimeters. It weighs 17,300 grams and comes in a package with a width of 475 millimeters, a depth of 850 millimeters, and a height of 438 millimeters. With a sound power level of 99 decibels and a sound pressure level of 112 decibels, the saw emits a relatively loud noise. The sound level uncertainty is 3 decibels. Additionally, the saw has a vibration level of 2.5 meters per second squared, with a vibration level uncertainty of 1.5 meters per second squared. The power source for this saw is AC, and it has an input power of 1600 watts. Its construction and design make it suitable for professional use. Please note that this description is purely objective and does not provide an assessment of the product's performance or quality.
| Brand | Bosch |
| Model | GCM 8 SJL Professional | 0 601 B19 100 |
| Product | saw |
| EAN | 3165140654319 |
| Language | English |
| Filetype | User manual (PDF) |
| Width | 910 mm |
| Depth | 960 mm |
| Height | 410 mm |
| Weight | 17300 g |
| Package width | 475 mm |
| Package depth | 850 mm |
| Package height | 438 mm |
| Sound power level | 99 dB |
| Sound pressure level | 112 dB |
| Sound level uncertainty | 3 dB |
| Vibration level | 2.5 m/s² |
| Vibration level uncertainty | 1.5 m/s² |
| Idle speed (max) | 5500 RPM |
| Cutting depth (90º) | 70 mm |
| Cutting width (90°) | 312 mm |
| Miter setting (left) | 52 ° |
| Miter setting (right) | 60 ° |
| Bevel setting (left) | 47 ° |
| Bevel setting (right) | 2 ° |
| Power source | AC |
| Input power | 1600 W |
| AC input voltage | 230 - 240 V |
| Saw blade included | Yes |
| Blade diameter | 210 mm |
| Blade bore | 30 mm |
| Blade thickness | 2 mm |
| Number of blade teeth | 48 |
| Laser guide | Yes |
| Protection class | II |
| Sliding rails | Yes |
| Dust extraction | Yes |
| Soft start | Yes |
| Spindle lock | Yes |
| Bevel type | - |
Can't find the answer to your question in the manual? You may find the answer to your question in the FAQs about the Bosch GCM 8 SJL Professional below.
The Bosch GCM 8 SJL Professional has a weight of 17300 g.
1. Wipe sawdust from the saw blade with a brush. 2. Spray the saw blade with oven cleaner and leave for 30 minutes. 3. Remove the oven cleaner and dirt with a dry cloth. 4. Grease saw blade with Vaseline.
If there is resin or other debris on the blade, it may look like the blade is blunt. If the saw blade has been thoroughly cleaned and is still blunt, it is recommended to have the saw blade sharpened.
1. Soak the rusty part in vinegar until completely soaked through. 2. Let the vinegar work on the rust for 24 hours. 3. Remove the rust with a wire brush or aluminium foil.
The maximum achievable charge level is expressed with 16V or 20V. The V in this case stands for Volt.
The amount of sound varies a lot per brand and type of saw, it is therefore wise to wear hearing protection to be sure.
The Bosch GCM 8 SJL Professional has a height of 410 mm.
The Bosch GCM 8 SJL Professional has a width of 910 mm.
The Bosch GCM 8 SJL Professional has a depth of 960 mm.
Check if the power cord is securely plugged in and if the circuit breaker or fuse is functioning properly. Ensure that the power supply meets the required voltage for the saw.
Locate the bevel lock lever on your saw and release it. Then, tilt the saw to the desired bevel angle, using the bevel scale for reference. Finally, tighten the bevel lock lever to secure the angle.
Make sure the saw is unplugged, then loosen the blade bolt using the provided blade wrench. Remove the old blade and carefully mount the new one, ensuring it is properly seated on the arbor. Finally, tighten the blade bolt securely.
Check if the depth adjustment lever is properly engaged. Make sure it is securely locked in position before making cuts. If necessary, recalibrate the cutting depth using the depth adjustment scale and knob.
Prior to transportation, unplug the saw and secure the cutting head in the down position. Remove the blade and securely lock it in place. Use the integrated carrying handles to lift and transport the saw, ensuring it is properly supported and stable during transit.
The sound power level of the Bosch GCM 8 SJL Professional is 99 dB and the sound pressure level is 112 dB. This means that the saw produces a high level of noise during operation, which may require the use of hearing protection for the user.
The power source of the Bosch GCM 8 SJL Professional is AC, which means it can be powered directly from a standard electrical outlet. This provides convenience and eliminates the need for a separate power supply.
Yes, the Bosch GCM 8 SJL Professional includes a saw blade with a diameter of 210 mm. This is beneficial for the user as they do not need to purchase a separate blade for initial use.
The input power of the Bosch GCM 8 SJL Professional is 1600 W. This indicates that the saw has a relatively high power capacity, allowing for efficient cutting and increased productivity compared to lower-powered models.
The Bosch GCM 8 SJL Professional has a maximum idle speed of 5500 RPM. This indicates that the saw is capable of fast and precise cutting, making it suitable for a variety of applications and materials.
Yes, the manual of the Bosch GCM 8 SJL Professional is available in English .
Is your question not listed? Ask your question here
No results
Need help?
Do you have a question about the Bosch and is the answer not in the manual?
Question and answer
Number of questions: 0