Bosch GCM 350-254 Professional manual

Bosch GCM 350-254 Professional
7.5 · 1
PDF manual
 · 516 pages
English
manualBosch GCM 350-254 Professional
Robert Bosch Power Tools GmbH
70538 Stuttgart
GERMANY
www.bosch-pt.com
1 609 92A 5UD (2020.10) PS / 516
de Originalbetriebsanleitung
en Original instructions
fr Notice originale
es Manual original
pt Manual original
it Istruzioni originali
nl Oorspronkelijke gebruiksaanwijzing
da Original brugsanvisning
sv Bruksanvisning i original
no Original driftsinstruks
fi Alkuperäiset ohjeet
el Πρωτότυπο οδηγιών χρήσης
tr Orijinal işletme talimatı
pl Instrukcja oryginalna
cs Původní návod k používání
sk Pôvodný návod na použitie
hu Eredeti használati utasítás
ru Оригинальное руководство по
эксплуатации
uk Оригінальна інструкція з
експлуатації
kk Пайдалану нұсқаулығының
түпнұсқасы
ro Instrucțiuni originale
bg Оригинална инструкция
mk Оригинално упатство за работа
sr Originalno uputstvo za rad
sl Izvirna navodila
hr Originalne upute za rad
et Algupärane kasutusjuhend
lv Instrukcijas oriģinālvalodā
lt Originali instrukcija
ko 사용 설명서 원본
ar   
fa   
1 609 92A 5UD

GTS 10 XC Professional

View the manual for the Bosch GCM 350-254 Professional here, for free. This manual comes under the category saws and has been rated by 1 people with an average of a 7.5. This manual is available in the following languages: English. Do you have a question about the Bosch GCM 350-254 Professional or do you need help? Ask your question here

Need help?

Do you have a question about the Bosch and is the answer not in the manual?

  • Receive updates on solutions
  • Get answers to your question

Question and answer

Number of questions: 1
S
simon bearrymanFebruary 27, 2020

Hi es my question is does it have trench cut facility ?

The Bosch GCM 350-254 Professional is a saw designed for professional use. It is known for its precise and accurate cutting capabilities, making it a popular choice among professionals in the woodworking and carpentry industries. One of the standout features of the Bosch GCM 350-254 Professional is its powerful motor. This saw is equipped with a high-powered motor that delivers strong and consistent cutting performance. It has a 254mm blade diameter, which allows for a maximum cutting depth of 91mm at 0 degrees and 57mm at 45 degrees. The saw also has a robust and durable construction. It is made from high-quality materials that ensure longevity and reliability. The GCM 350-254 Professional is built to withstand the demands of professional use, making it a reliable tool that can withstand heavy-duty cutting tasks. Another important feature of this saw is its accuracy and precision. It is equipped with advanced cutting technology that enables precise cuts every time. The saw has a laser guide system that provides a clear and accurate cutting line, allowing users to achieve precise cuts with ease. In terms of safety features, the Bosch GCM 350-254 Professional has a blade guard and a spindle lock. These features help prevent accidental injuries during operation and ensure the safety of the user. Overall, the Bosch GCM 350-254 Professional is a high-quality saw that offers powerful cutting capabilities and precise results. It is a reliable tool that is designed for professional use, making it a valuable addition to any woodworking or carpentry workshop.

General
BrandBosch
ModelGCM 350-254 Professional | 0 601 B22 600
Productsaw
LanguageEnglish
FiletypeUser manual (PDF)

Can't find the answer to your question in the manual? You may find the answer to your question in the FAQs about the Bosch GCM 350-254 Professional below.

What is the best way to clean my saw blade?

1. Wipe sawdust from the saw blade with a brush. 2. Spray the saw blade with oven cleaner and leave for 30 minutes. 3. Remove the oven cleaner and dirt with a dry cloth. 4. Grease saw blade with Vaseline.

My saw blade is blunt. What now?

If there is resin or other debris on the blade, it may look like the blade is blunt. If the saw blade has been thoroughly cleaned and is still blunt, it is recommended to have the saw blade sharpened.

How do I remove rust from my Bosch saw?

1. Soak the rusty part in vinegar until completely soaked through. 2. Let the vinegar work on the rust for 24 hours. 3. Remove the rust with a wire brush or aluminium foil.

What does '16V' or '20V' mean?

The maximum achievable charge level is expressed with 16V or 20V. The V in this case stands for Volt.

Do I have to wear hearing protection when using a saw?

The amount of sound varies a lot per brand and type of saw, it is therefore wise to wear hearing protection to be sure.

How do I adjust the bevel angle on the Bosch GCM 350-254 Professional saw?

To adjust the bevel angle on the Bosch GCM 350-254 Professional saw, follow these steps: 1. Place the workpiece on the saw table in front of the protective cover. 2. Use the crank to raise or lower the saw blade to the desired position, approximately 3-6 mm above the workpiece. 3. Switch on the power tool and saw through the workpiece using a uniform feed. Avoid applying too much pressure to prevent overheating and damage to the workpiece. 4. Switch off the power tool and wait until the saw blade comes to a complete stop. For sawing a bevel angle: 1. Set the required saw blade bevel angle. 2. If the saw blade is tilted to the left, ensure that the parallel guide is to the right of the blade. 3. Follow the work steps outlined in the "Making straight cuts" section of the manual. For sawing mitre angles: 1. Set the desired mitre angle on the angle guide. 2. Place the workpiece on the profile rail, ensuring it is not positioned along the cut line. 3. Use the crank to adjust the saw blade position. 4. Switch on the power tool and hold the workpiece against the profile rail while sliding the angle guide slowly forwards in the guide groove. 5. Switch off the power tool and wait until the saw blade comes to a complete stop. These steps will help you adjust the bevel angle on the Bosch GCM 350-254 Professional saw accurately.

Why is the saw blade not cutting straight on the Bosch GCM 350-254 Professional saw?

When the saw blade is not cutting straight on the Bosch GCM 350-254 Professional saw, you can follow these steps to troubleshoot the issue: 1. Check the angle guide: Ensure that the angle guide is properly aligned and securely in place. Make sure it is set to the desired angle for straight cuts. 2. Verify the parallel guide: Adjust the parallel guide to the desired cutting width. This will help maintain a straight cutting line. 3. Examine the workpiece: Ensure that the workpiece is positioned correctly and securely against the saw table. If the workpiece is narrow or you are making bevel cuts, use the push stick and additional parallel guide provided for added stability. 4. Mark the cutting line: Use the round yellow label on the saw to mark the saw blade thickness. This will help you position the workpiece accurately for cutting without having to open the blade guard. By following these steps, you can troubleshoot and address the issue of the saw blade not cutting straight on the Bosch GCM 350-254 Professional saw.

What should I do if the saw blade gets stuck in the workpiece while using the Bosch GCM 350-254 Professional saw?

If the saw blade gets stuck in the workpiece while using the Bosch GCM 350-254 Professional saw, you can follow these steps to address the issue: 1. Stop the power tool: Switch off the power tool and wait until the saw blade comes to a complete stop before taking any further action. 2. Check for obstructions: Inspect the workpiece and the area around the saw blade for any foreign objects or debris that may be causing the blade to get stuck. Remove any obstructions carefully. 3. Verify the cutting depth: Ensure that the cutting depth of the saw blade is appropriate for the thickness of the workpiece. Adjust the cutting depth if necessary. 4. Check the blade condition: Examine the saw blade for any signs of damage or dullness. A damaged or dull blade can cause the blade to get stuck. Replace the blade if needed. 5. Use proper cutting techniques: Make sure you are using the correct cutting technique for the type of material you are working with. Apply steady and even pressure while guiding the workpiece through the saw. By following these steps, you can troubleshoot and resolve the issue of the saw blade getting stuck in the workpiece while using the Bosch GCM 350-254 Professional saw.

How do I change the saw blade on the Bosch GCM 350-254 Professional saw?

To change the saw blade on the Bosch GCM 350-254 Professional saw, follow these steps: 1. Switch off the power tool and wait for the saw blade to come to a complete stop. 2. Locate the blade change lever or button on the saw. It is usually located near the blade guard or on the side of the saw. 3. Press and hold the blade change lever or button to release the blade lock mechanism. 4. While holding the lever or button, use the wrench provided to loosen the arbor nut or bolt that secures the blade to the saw. 5. Remove the arbor nut or bolt and carefully take out the old saw blade from the arbor. 6. Place the new saw blade onto the arbor, ensuring that the teeth are facing in the correct direction as indicated on the blade. 7. Tighten the arbor nut or bolt securely using the wrench, making sure the blade is properly aligned. 8. Release the blade change lever or button to lock the blade in place. 9. Double-check that the blade is securely fastened before operating the saw. By following these steps, you can safely and effectively change the saw blade on the Bosch GCM 350-254 Professional saw.

Why is the motor of the Bosch GCM 350-254 Professional saw overheating?

The motor of the Bosch GCM 350-254 Professional saw may overheat due to various reasons. Here are some possible causes and steps to address the issue: 1. Insufficient cooling: Check if the cooling vents of the motor are blocked by dust or debris. Clean the vents using compressed air or a soft brush to ensure proper airflow. 2. Overloading the motor: Avoid pushing the saw beyond its capacity by forcing it through thick or hard materials. Reduce the cutting load and allow the motor to cool down periodically during extended use. 3. Blade tension: Ensure that the saw blade is properly tensioned. A loose or improperly tensioned blade can cause the motor to work harder and overheat. Follow the instructions in the manual to adjust the blade tension correctly. 4. Faulty motor or wiring: If the above steps do not resolve the issue, there may be a problem with the motor or wiring. In such cases, it is recommended to contact a qualified repair person or the manufacturer's customer service for further assistance. By following these steps, you can troubleshoot and address the issue of the motor overheating on the Bosch GCM 350-254 Professional saw.

Is the manual of the Bosch GCM 350-254 Professional available in English?

Yes, the manual of the Bosch GCM 350-254 Professional is available in English .

Is your question not listed? Ask your question here

No results