Bosch GCM 18V-305 GDC Professional manual

Bosch GCM 18V-305 GDC Professional
7.5 · 1
PDF manual
 · 227 pages
English
manualBosch GCM 18V-305 GDC Professional
Robert Bosch Power Tools GmbH
70538 Stuttgart
GERMANY
www.bosch-pt.com
1 609 92A 6TT (2021.07) PS / 227
en Original instructions
fr Notice originale
pt Manual original
es Manual original
pt Manual de instruções original
zh 正本使用
zh 原始使用說明書
th หนังสือคู่มือการใช้งานฉบับ
ต้นแบบ
id Petunjuk-Petunjuk untuk
Penggunaan Orisinal
vi Bn gc hướng dn s dng
ar   
fa   
1 609 92A 6TT

GCM 18V-305 GDC

Professional

View the manual for the Bosch GCM 18V-305 GDC Professional here, for free. This manual comes under the category saws and has been rated by 1 people with an average of a 7.5. This manual is available in the following languages: English. Do you have a question about the Bosch GCM 18V-305 GDC Professional or do you need help? Ask your question here

Need help?

Do you have a question about the Bosch and is the answer not in the manual?

  • Receive updates on solutions
  • Get answers to your question

Question and answer

Number of questions: 0

The Bosch GCM 18V-305 GDC Professional is a cordless miter saw designed for professionals. With a cutting capacity of up to 305mm, it offers a high level of precision and accuracy when cutting various materials. The saw features a brushless motor for increased efficiency and longer runtime, making it suitable for extended use on job sites. Equipped with a double bevel system, the Bosch GCM 18V-305 GDC Professional allows for quick and easy bevel cuts in both directions. The saw also has an integrated laser guide to ensure accurate cutting lines, reducing the margin for error. Additionally, it is equipped with a dust extraction port to keep the work area clean and improve visibility while cutting. The Bosch GCM 18V-305 GDC Professional is compatible with the Bosch Wireless Battery Indicators, allowing users to easily monitor the battery status during operation. Overall, this cordless miter saw is a reliable and durable tool for professionals looking to achieve precise cuts in a variety of materials.

General
BrandBosch
ModelGCM 18V-305 GDC Professional
Productsaw
LanguageEnglish
FiletypeUser manual (PDF)

Can't find the answer to your question in the manual? You may find the answer to your question in the FAQs about the Bosch GCM 18V-305 GDC Professional below.

What is the best way to clean my saw blade?

1. Wipe sawdust from the saw blade with a brush. 2. Spray the saw blade with oven cleaner and leave for 30 minutes. 3. Remove the oven cleaner and dirt with a dry cloth. 4. Grease saw blade with Vaseline.

My saw blade is blunt. What now?

If there is resin or other debris on the blade, it may look like the blade is blunt. If the saw blade has been thoroughly cleaned and is still blunt, it is recommended to have the saw blade sharpened.

How do I remove rust from my Bosch saw?

1. Soak the rusty part in vinegar until completely soaked through. 2. Let the vinegar work on the rust for 24 hours. 3. Remove the rust with a wire brush or aluminium foil.

What does '16V' or '20V' mean?

The maximum achievable charge level is expressed with 16V or 20V. The V in this case stands for Volt.

Do I have to wear hearing protection when using a saw?

The amount of sound varies a lot per brand and type of saw, it is therefore wise to wear hearing protection to be sure.

How do I properly tighten the hex socket screw for mounting the saw blade?

To properly tighten the hex socket screw for mounting the saw blade on the Bosch GCM 18V-305 GDC Professional saw, follow these steps: 1. Bring the power tool into the work position. 2. Swivel the retracting blade guard to the back and hold it in this position. 3. Turn the hex socket screw with the provided hex key (4 mm) while simultaneously pushing the spindle lock until it engages. 4. Keep holding the spindle lock and loosen the hex socket screw by turning it clockwise (left-hand thread). 5. Remove the clamping flange. 6. Remove the old saw blade. 7. If necessary, clean all the parts before installing them. 8. Swivel the retracting blade guard to the back and hold it in this position. 9. Place the new saw blade on the inner clamping flange. 10. Fit the clamping flange and tighten the hex socket screw by turning it anticlockwise while pressing the spindle lock until it engages. 11. Slowly push the retracting blade guard back down. By following these steps, you will be able to properly tighten the hex socket screw for mounting the saw blade on the Bosch GCM 18V-305 GDC Professional saw.

What should I do if the clamping flange and inner clamping flange are not securely holding the saw blade?

To ensure that the clamping flange and inner clamping flange securely hold the saw blade on the Bosch GCM 18V-305 GDC Professional saw, follow these steps: 1. Bring the power tool into the work position. 2. Swivel the retracting blade guard to the back and hold it in this position. 3. Loosen the hex socket screw by turning it clockwise (left-hand thread) while pressing the spindle lock until it engages. 4. Remove the clamping flange and the saw blade. 5. Clean all the parts before installing them, if necessary. 6. Place the new saw blade on the inner clamping flange. 7. Fit the clamping flange and tighten the hex socket screw by turning it anticlockwise while pressing the spindle lock until it engages. 8. Slowly push the retracting blade guard back down. By following these steps, you can ensure that the clamping flange and inner clamping flange securely hold the saw blade on the Bosch GCM 18V-305 GDC Professional saw.

Why is the clamping lever of the saw table extension not locking in place?

If the clamping lever of the saw table extension on the Bosch GCM 18V-305 GDC Professional saw is not locking in place, you can follow these steps to address the issue: 1. Ensure that the power tool is in the work position. 2. Swivel the retracting blade guard to the back and hold it in this position. 3. Check if the clamping lever is fully engaged and pressed down. 4. If the clamping lever is not locking, inspect the clamping wedge and the two articulated parts at the bottom of the glide arm. 5. Clean any debris or obstructions that may be preventing the clamping lever from locking properly. 6. Push the clamping lever all the way down to engage the clamping wedge between the two articulated parts. 7. Test the clamping lever to ensure it is securely locking the saw table extension in place. 8. If the issue persists, consider contacting Bosch customer support for further assistance. By following these steps, you can address the issue of the clamping lever not locking in place on the Bosch GCM 18V-305 GDC Professional saw.

How do I adjust the locking screw for the adjustable fence?

To adjust the locking screw for the adjustable fence on the Bosch GCM 18V-305 GDC Professional saw, follow these steps: 1. Ensure that the power tool is in the work position. 2. Locate the locking screw on the adjustable fence. 3. Use a suitable screwdriver to loosen the locking screw by turning it counterclockwise. 4. Adjust the position of the adjustable fence according to your desired measurement or angle. 5. Once the fence is in the desired position, tighten the locking screw by turning it clockwise. 6. Ensure that the locking screw is securely tightened to prevent any movement of the adjustable fence during operation. 7. Test the stability of the fence by applying gentle pressure to ensure it remains in place. 8. If further adjustments are needed, repeat the process by loosening the locking screw, making the necessary adjustments, and then tightening the screw again. By following these steps, you can easily adjust the locking screw for the adjustable fence on the Bosch GCM 18V-305 GDC Professional saw.

What should I do if the on/off switch is not working or the laser alignment is not accurate?

If the on/off switch is not working or the laser alignment is not accurate on the Bosch GCM 18V-305 GDC Professional saw, you can take the following steps to address the issues: 1. Check the power supply: Ensure that the saw is properly connected to a power source and that the power supply is functioning correctly. 2. Inspect the on/off switch: Check if the switch is in the correct position and if it is functioning properly. Make sure it is not stuck or damaged. 3. Verify the laser alignment: Check if the laser beams are properly aligned with the cutting line. If they are not accurate, you may need to adjust the laser alignment. 4. Adjust the laser alignment: Refer to the manual for instructions on how to adjust the laser alignment. Follow the steps provided to align the laser beams with the cutting line. 5. Test the functionality: After adjusting the laser alignment, test the on/off switch and the accuracy of the laser alignment. Ensure that the switch turns the saw on and off smoothly, and that the laser beams accurately indicate the cutting line. If the issues persist, it is recommended to contact Bosch customer support for further assistance or to consult a qualified technician for repairs.

Is the manual of the Bosch GCM 18V-305 GDC Professional available in English?

Yes, the manual of the Bosch GCM 18V-305 GDC Professional is available in English .

Is your question not listed? Ask your question here

No results