Bosch GCM 12 SDE Professional manual

Bosch GCM 12 SDE Professional
6.8 · 1
PDF manual
 · 471 pages
English
manualBosch GCM 12 SDE Professional
Robert Bosch Power Tools GmbH
70538 Stuttgart
GERMANY
www.bosch-pt.com
1 609 92A 6SN (2021.07) PS / 471
de Originalbetriebsanleitung
en Original instructions
fr Notice originale
es Manual original
pt Manual original
it Istruzioni originali
nl Oorspronkelijke gebruiksaanwijzing
da Original brugsanvisning
sv Bruksanvisning i original
no Original driftsinstruks
fi Alkuperäiset ohjeet
el Πρωτότυπο οδηγιών χρήσης
tr Orijinal işletme talimatı
pl Instrukcja oryginalna
cs Původní návod k používání
sk Pôvodný návod na použitie
hu Eredeti használati utasítás
ru Оригинальное руководство по
эксплуатации
uk Оригінальна інструкція з
експлуатації
kk Пайдалану нұсқаулығының
түпнұсқасы
ro Instrucțiuni originale
bg Оригинална инструкция
mk Оригинално упатство за работа
sr Originalno uputstvo za rad
sl Izvirna navodila
hr Originalne upute za rad
et Algupärane kasutusjuhend
lv Instrukcijas oriģinālvalodā
lt Originali instrukcija
ko 사용 설명서 원본
ar   
fa   
1 609 92A 6SN

GCM 12 SDE Professional

View the manual for the Bosch GCM 12 SDE Professional here, for free. This manual comes under the category saws and has been rated by 1 people with an average of a 6.8. This manual is available in the following languages: English. Do you have a question about the Bosch GCM 12 SDE Professional or do you need help? Ask your question here

Need help?

Do you have a question about the Bosch and is the answer not in the manual?

  • Receive updates on solutions
  • Get answers to your question

Question and answer

Number of questions: 0

The Bosch GCM 12 SDE Professional is a powerful and versatile saw designed for precision cutting in various applications. With a cutting capacity of 85 x 370 millimeters at 0°, it can handle a wide range of materials with ease. Its cutting capacity at a 45° mitre is 90 x 250 millimeters, and at a 45° incline, it can cut 38 x 370 millimeters. Featuring a left mitre setting of 52° and a right mitre setting of 60°, this saw allows for angled cuts with accuracy. The bevel setting is 47° to both the left and right, further enhancing its versatility. The saw operates at a maximum idle speed of 4000 RPM, ensuring efficient and fast cutting. With a 30-millimeter blade bore and a 305-millimeter blade diameter, the Bosch GCM 12 SDE Professional can accommodate large cutting tasks. This saw weighs 28600 grams, making it easy to transport and maneuver. It is powered by an 1800-watt AC motor, providing sufficient power for demanding cutting operations. The saw also features a dust extraction system, effectively removing dust and debris for a clean work environment. Additionally, it is equipped with a spindle lock, allowing for quick and easy blade changes. Overall, the Bosch GCM 12 SDE Professional is a reliable and durable saw that offers excellent cutting performance. Its precise settings, powerful motor, and convenient features make it suitable for professional and DIY projects alike.

General
BrandBosch
ModelGCM 12 SDE Professional | 0 601 B23 100
Productsaw
EAN3165140769648
LanguageEnglish
FiletypeUser manual (PDF)
Other features
Cutting capacity 0°85 x 370 mm
Cutting capacity 45° miter90 x 250 mm
Cutting capacity 45° incline38 x 370 mm
Performance
Miter setting (left)52 °
Miter setting (right)60 °
Bevel setting (left)47 °
Bevel setting (right)47 °
Idle speed (max)4000 RPM
Packaging content
Blade bore30 mm
Blade diameter305 mm
Weight & dimensions
Weight28600 g
Power
Input power1800 W
Power sourceAC
Features
Dust extractionYes
Spindle lockYes
show more

Can't find the answer to your question in the manual? You may find the answer to your question in the FAQs about the Bosch GCM 12 SDE Professional below.

What is the weight of the Bosch GCM 12 SDE Professional?

The Bosch GCM 12 SDE Professional has a weight of 28600 g.

What is the best way to clean my saw blade?

1. Wipe sawdust from the saw blade with a brush. 2. Spray the saw blade with oven cleaner and leave for 30 minutes. 3. Remove the oven cleaner and dirt with a dry cloth. 4. Grease saw blade with Vaseline.

My saw blade is blunt. What now?

If there is resin or other debris on the blade, it may look like the blade is blunt. If the saw blade has been thoroughly cleaned and is still blunt, it is recommended to have the saw blade sharpened.

How do I remove rust from my Bosch saw?

1. Soak the rusty part in vinegar until completely soaked through. 2. Let the vinegar work on the rust for 24 hours. 3. Remove the rust with a wire brush or aluminium foil.

What does '16V' or '20V' mean?

The maximum achievable charge level is expressed with 16V or 20V. The V in this case stands for Volt.

Do I have to wear hearing protection when using a saw?

The amount of sound varies a lot per brand and type of saw, it is therefore wise to wear hearing protection to be sure.

What is the cutting capacity of the Bosch GCM 12 SDE Professional at 0°?

The cutting capacity at 0° is 85 x 370 mm. This means that the saw can make cuts up to 85 mm thick and 370 mm wide at this angle.

Does the Bosch GCM 12 SDE Professional have a dust extraction feature?

Yes, it does. This means that the saw has a built-in system to remove dust and debris, keeping the work area clean and reducing the need for manual cleanup.

What is the maximum idle speed of the Bosch GCM 12 SDE Professional?

The maximum idle speed is 4000 RPM. This indicates that the saw has a high rotation speed, allowing for fast and efficient cutting.

Does the Bosch GCM 12 SDE Professional have a spindle lock?

Yes, it does. The spindle lock feature allows for easy and quick changing of the blade, enhancing user convenience and efficiency.

What is the input power of the Bosch GCM 12 SDE Professional?

The input power is 1800 W. This suggests that the saw has a high power output, enabling it to make accurate and precise cuts in various materials.

What should I do if the saw blade does not fit properly on the Bosch GCM 12 SDE Professional saw?

If the saw blade does not fit properly on the Bosch GCM 12 SDE Professional saw, you can follow these steps to troubleshoot the issue: 1. Ensure that the locking knob (23) and the clamping lever (8) are tightened firmly before sawing. If they are loose, the saw blade may not fit properly. 2. Check if the saw blade is coming in contact with the fence, screw clamps, or other machine parts. Remove any mounted auxiliary stops or adjust them accordingly to prevent interference with the saw blade. 3. Make sure that the saw blade is suitable for the intended use and within the permissible dimensions specified in the manual. Using a blade that is not compatible with the saw can cause fitting issues. 4. Inspect the saw blade for any damage or warping. If the blade is bent or damaged, it may not fit properly and should be replaced. 5. Verify that the retracting blade guard operates properly and moves freely. The guard should open when the tool arm is guided downwards and close again over the saw blade when the tool arm is guided upwards. 6. If the issue persists and the saw blade still does not fit properly, it is recommended to contact the after-sales service for further assistance. By following these steps, you can troubleshoot the issue of the saw blade not fitting properly on the Bosch GCM 12 SDE Professional saw.

Why is the workpiece not fitting within the permissible dimensions of the saw?

If the workpiece is not fitting within the permissible dimensions of the Bosch GCM 12 SDE Professional saw, you can follow these steps to troubleshoot the issue: 1. Check the mitre angle and bevel angle settings of the saw. Ensure that they are properly adjusted according to the requirements of your workpiece. 2. Verify the height and width dimensions of the workpiece. Refer to the manual for the permissible dimensions specified for different angles. 3. Measure the workpiece accurately to ensure that it falls within the specified dimensions. Use a tape measure or ruler to determine the height and width of the workpiece. 4. If the workpiece exceeds the permissible dimensions, consider using a different cutting method or adjusting the design of your project to accommodate the limitations of the saw. 5. Ensure that the workpiece is securely clamped or held in place during cutting to prevent any movement or misalignment. 6. If the issue persists and the workpiece still does not fit within the permissible dimensions, it is recommended to consult the after-sales service or contact Bosch for further assistance. By following these steps, you can troubleshoot the issue of the workpiece not fitting within the permissible dimensions of the Bosch GCM 12 SDE Professional saw.

How can I reduce the noise level of the Bosch GCM 12 SDE Professional saw?

To reduce the noise level of the Bosch GCM 12 SDE Professional saw, you can follow these steps: 1. Ensure that the saw is mounted or placed on a level and firm work surface before use. This reduces the risk of the saw becoming unstable and causing excessive vibrations and noise. 2. Plan your work and adjust the adjustable fence correctly to support the workpiece. Make sure it does not interfere with the blade or the guarding system. 3. Provide adequate support for workpieces that are wider or longer than the table top. Use table extensions, saw horses, or other suitable supports to prevent the workpiece from tipping and causing vibrations. 4. Avoid using another person as a substitute for a table extension or additional support. Unstable support can cause the blade to bind or the workpiece to shift during cutting, resulting in increased noise. 5. Use clamps or fixtures designed to properly support round materials such as rods or tubing. This prevents the workpiece from rolling and causing the blade to "bite" and create additional noise. 6. Let the blade reach full speed before contacting the workpiece. This reduces the risk of the workpiece being thrown and minimizes noise. 7. Keep the work area clean and free from debris. Material mixtures, such as sawdust, can increase noise levels and pose a hazard. 8. Avoid using dull, cracked, bent, or damaged saw blades. Unsharpened or improperly set blades can cause excessive friction, blade binding, and kickback, resulting in increased noise. 9. Use saw blades with the correct size and shape of arbor holes. Blades that do not match the mounting hardware of the saw can run off-center, causing loss of control and generating more noise. 10. After finishing a cut, release the switch, hold the saw head down, and wait for the blade to stop before removing the cut-off piece. This prevents any unnecessary noise caused by the coasting blade. By following these steps, you can effectively reduce the noise level of the Bosch GCM 12 SDE Professional saw during operation.

What should I check if I am having difficulty assembling the saw?

If you are having difficulty assembling the Bosch GCM 12 SDE Professional saw, you can check the following: 1. Ensure that the saw is mounted on a flat and stable work surface. This provides a secure base for assembly. 2. Verify that all the necessary components and parts are included in the package. Check for any missing or damaged parts. 3. Refer to the assembly instructions provided in the manual. Follow the step-by-step guide to ensure proper assembly. 4. Pay attention to the alignment and positioning of the different parts. Make sure they fit together correctly and securely. 5. Double-check all the connections and fastenings. Ensure that screws, bolts, or other fasteners are tightened properly. 6. If you encounter any difficulties during assembly, review the instructions again and make sure you are following them correctly. 7. If the issue persists or you are unsure about the assembly process, it is recommended to contact the after-sales service or Bosch customer support for further assistance. By checking these aspects and following the assembly instructions carefully, you should be able to overcome any difficulties you may encounter during the assembly of the Bosch GCM 12 SDE Professional saw.

How do I mount the Bosch GCM 12 SDE Professional saw on a work surface or on a Bosch saw stand?

To mount the Bosch GCM 12 SDE Professional saw on a work surface or Bosch saw stand, you can follow these steps: 1. Ensure that the work surface or saw stand is stable and level before mounting the saw. This provides a secure base for the saw during operation. 2. Place the saw on the work surface or saw stand, aligning the mounting holes on the base of the saw with the corresponding holes on the work surface or saw stand. 3. Insert the mounting screws through the holes on the base of the saw and into the corresponding holes on the work surface or saw stand. 4. Tighten the mounting screws securely using a suitable screwdriver or wrench. Ensure that the saw is firmly attached to the work surface or saw stand to prevent any movement during use. 5. Double-check the stability of the mounted saw by gently shaking it to ensure that it is securely fastened. 6. If using a Bosch saw stand, follow the specific instructions provided with the stand for mounting the saw. Make sure to follow the recommended steps and use any additional accessories or attachments as required. By following these steps, you can successfully mount the Bosch GCM 12 SDE Professional saw on a work surface or Bosch saw stand for safe and efficient operation.

Is the manual of the Bosch GCM 12 SDE Professional available in English?

Yes, the manual of the Bosch GCM 12 SDE Professional is available in English .

Is your question not listed? Ask your question here

No results