View the manual for the Bosch GCM 12 GDL here, for free. This manual comes under the category saws and has been rated by 5 people with an average of a 8.5. This manual is available in the following languages: English. Do you have a question about the Bosch GCM 12 GDL or do you need help? Ask your question here



The Bosch GCM 12 GDL is a saw with an input power of 2000 W. It features an idle speed of 3800 RPM, which allows for efficient and precise cutting. The blade diameter measures 305 mm, while the blade bore is 30 mm. One notable feature of the Bosch GCM 12 GDL is its position indicator, denoted as "Y." This indicator helps users accurately position and align the material to be cut, contributing to increased accuracy and productivity. With a noise level of 106 dB, it is advisable to use hearing protection while operating this saw to prevent potential hearing damage. Additionally, the saw has a weight of 32100 g, making it relatively heavy and potentially less portable compared to lighter alternatives. In terms of dimensions, the Bosch GCM 12 GDL has a width of 820 mm, a depth of 670 mm, and a height of 690 mm. These measurements provide an idea of the space required for storage or installation of the saw. Overall, the Bosch GCM 12 GDL is a powerful and robust saw suitable for various cutting tasks. Its high input power and speed contribute to efficient cutting, while the position indicator aids in precision and alignment. However, due to its weight, it may be less convenient for those seeking a more portable option.
| Brand | Bosch |
| Model | GCM 12 GDL | 0 601 B23 600 |
| Product | saw |
| EAN | 3165140584890 |
| Language | English |
| Filetype | User manual (PDF) |
| Input power | 2000 W |
| Input power | 2000 W |
| Power source | AC |
| AC input voltage | 230 V |
| Idle speed (max) | 3800 RPM |
| Blade diameter | 305 mm |
| Blade bore | 30 mm |
| Idle speed (max) | 4000 RPM |
| Miter setting (left) | 52 ° |
| Miter setting (right) | 60 ° |
| Bevel setting (left) | 47 ° |
| Bevel setting (right) | 47 ° |
| Sound power level | 106 dB |
| Sound pressure level | 93 dB |
| Sound level uncertainty | 3 dB |
| Vibration level | 2.5 m/s² |
| Vibration level uncertainty | 1.5 m/s² |
| Cross cut capacity (0° x 0°) | 104 x 341 mm |
| Miter cut capacity (45° x 0°) | 104 x 240 mm |
| Position indicator | Yes |
| Noise level | 106 dB |
| Weight | 32100 g |
| Width | 820 mm |
| Depth | 670 mm |
| Height | 690 mm |
| Weight | 32100 g |
| Width | 1100 mm |
| Depth | 670 mm |
| Height | 740 mm |
| Package width | 635 mm |
| Package depth | 790 mm |
| Package height | 565 mm |
| Input power | 2000 W |
| Noise level | 106 dB |
| Weight | 32100 g |
| Width | 820 mm |
| Depth | 670 mm |
| Height | 690 mm |
| Blade diameter | 305 mm |
| Blade bore | 30 mm |
| Saw blade included | Yes |
| Table saw mode | Yes |
| Sliding rails | Yes |
| Bevel type | - |
| Laser guide | Yes |
| Soft start | Yes |
Can't find the answer to your question in the manual? You may find the answer to your question in the FAQs about the Bosch GCM 12 GDL below.
The Bosch GCM 12 GDL has a weight of 32100 g.
1. Wipe sawdust from the saw blade with a brush. 2. Spray the saw blade with oven cleaner and leave for 30 minutes. 3. Remove the oven cleaner and dirt with a dry cloth. 4. Grease saw blade with Vaseline.
If there is resin or other debris on the blade, it may look like the blade is blunt. If the saw blade has been thoroughly cleaned and is still blunt, it is recommended to have the saw blade sharpened.
1. Soak the rusty part in vinegar until completely soaked through. 2. Let the vinegar work on the rust for 24 hours. 3. Remove the rust with a wire brush or aluminium foil.
The maximum achievable charge level is expressed with 16V or 20V. The V in this case stands for Volt.
The amount of sound varies a lot per brand and type of saw, it is therefore wise to wear hearing protection to be sure.
The Bosch GCM 12 GDL has a height of 690 mm.
The Bosch GCM 12 GDL has a width of 820 mm.
The Bosch GCM 12 GDL has a depth of 670 mm.
To change the blade on the Bosch GCM 12 GDL saw, start by unplugging the tool for safety. Then, locate the blade locking mechanism near the blade guard and use the provided wrench to loosen the blade bolt. Once loose, remove the old blade and carefully install the new one, ensuring it is securely tightened before use.
To adjust the bevel angle on the Bosch GCM 12 GDL saw, locate the bevel angle adjustment knob or lever (usually located on the front or side). Release the locking mechanism, then rotate the knob or lever to the desired angle. Once set, secure the locking mechanism to ensure stability during use.
When using the Bosch GCM 12 GDL saw, always wear appropriate personal protective equipment, such as safety glasses and hearing protection. Ensure the workpiece is securely clamped to prevent movement and use a push stick or other device when necessary to keep your hands at a safe distance from the blade. Additionally, familiarize yourself with the safety features and follow all safety guidelines provided by Bosch.
To adjust the cutting depth on the Bosch GCM 12 GDL saw, locate the depth adjustment knob or lever (usually near the front of the tool). Release the locking mechanism and move the blade guard up or down to achieve the desired cutting depth. Once set, secure the locking mechanism to maintain the chosen depth.
Regular maintenance of the Bosch GCM 12 GDL saw is crucial for its optimal performance. Keep the saw clean by removing sawdust and debris from the blade guard, base, and other areas. Lubricate any moving parts as recommended by the manufacturer. Check the alignment of the blade and fence regularly and make necessary adjustments. Inspect and replace any worn or damaged parts promptly to ensure safe and efficient operation.
Yes, Bosch GCM 12 GDL has a position indicator. This feature allows users to accurately position and align their cuts, making it easier to achieve precise results.
The blade diameter of Bosch GCM 12 GDL is 305 mm. This larger blade size allows for deeper cuts and greater cutting capacity compared to smaller blades.
Yes, Bosch GCM 12 GDL can be used in table saw mode. This versatile feature allows the user to use the saw as a stationary table saw, providing stability and control for larger projects.
The noise level of Bosch GCM 12 GDL is 106 dB. This is relatively high compared to other power tools, so it is recommended to use hearing protection when operating the saw to protect your ears.
Yes, Bosch GCM 12 GDL can be used for bevel cuts. It has a bevel setting of 47° on both the left and right sides, allowing users to make angled cuts with ease.
Yes, the manual of the Bosch GCM 12 GDL is available in English .
Is your question not listed? Ask your question here
No results
Need help?
Do you have a question about the Bosch and is the answer not in the manual?
Question and answer
Number of questions: 0