Bosch GCD 12 JL manual

Bosch GCD 12 JL
7.8 · 2
PDF manual
 · 329 pages
English
manualBosch GCD 12 JL
Robert Bosch Power Tools GmbH
70538 Stuttgart
GERMANY
www.bosch-pt.com
1 609 92A 8KU (2023.03) PS / 329
de Originalbetriebsanleitung
en Original instructions
fr Notice originale
es Manual original
pt Manual original
it Istruzioni originali
nl Oorspronkelijke gebruiksaanwijzing
da Original brugsanvisning
sv Bruksanvisning i original
no Original driftsinstruks
fi Alkuperäiset ohjeet
el Πρωτότυπο οδηγιών χρήσης
tr Orijinal işletme talimatı
pl Instrukcja oryginalna
cs Původní návod k používání
sk Pôvodný návod na použitie
hu Eredeti használati utasítás
ru Оригинальное руководство по
эксплуатации
uk Оригінальна інструкція з
експлуатації
kk Пайдалану нұсқаулығының
түпнұсқасы
ro Instrucțiuni originale
bg Оригинална инструкция
mk Оригинално упатство за работа
sr Originalno uputstvo za rad
sl Izvirna navodila
hr Originalne upute za rad
et Algupärane kasutusjuhend
lv Instrukcijas oriģinālvalodā
lt Originali instrukcija
ko 사용 설명서 원본
ar   
fa   
1 609 92A 8KU

GCD 12 JL Professional

View the manual for the Bosch GCD 12 JL here, for free. This manual comes under the category saws and has been rated by 2 people with an average of a 7.8. This manual is available in the following languages: English. Do you have a question about the Bosch GCD 12 JL or do you need help? Ask your question here

Need help?

Do you have a question about the Bosch and is the answer not in the manual?

  • Receive updates on solutions
  • Get answers to your question

Question and answer

Number of questions: 1
A
Ajith December 31, 2023

This mechine needed cutting oil??

The Bosch GCD 12 JL is a powerful and robust saw designed for professional use. With an input power of 2000 W, this saw ensures efficient cutting performance. The idle speed of the saw can reach up to 1500 RPM, allowing for fast and precise cuts. The saw features a large blade diameter of 305 mm, making it suitable for cutting through various materials with ease. It has a blade bore of 30 mm, ensuring compatibility with common saw blades. With a weight of 20000 g, this saw may require some effort to handle but its solid build ensures stability during operation. The dimensions of the saw are as follows: width 517 mm, depth 327 mm, and height 383 mm. This makes it a relatively compact saw that can be easily transported and stored. The Bosch GCD 12 JL operates at a noise level of 113 dB, which may require hearing protection during extended use. However, the noise level is a result of the powerful motor and should not be a reflection of the saw's performance. One notable feature of the Bosch GCD 12 JL is that it includes a saw blade, eliminating the need for separate purchases. This further adds to the convenience and value of the product. Overall, the Bosch GCD 12 JL is a professional-grade saw that offers powerful cutting performance. With its high input power, large blade diameter, and compact design, it is suitable for a wide range of applications. The inclusion of a saw blade adds to the overall value of the product.

General
BrandBosch
ModelGCD 12 JL | 0 601 B28 000
Productsaw
EAN3165140721561
LanguageEnglish
FiletypeUser manual (PDF)
Power
Input power2000 W
Power sourceAC
Performance
Idle speed (max)1500 RPM
Blade diameter305 mm
Blade bore30 mm
Other features
Noise level113 dB
Weight & dimensions
Weight20000 g
Width517 mm
Depth327 mm
Height383 mm
Packaging content
Saw blade includedYes
Technical details
Input power2000 W
Noise level113 dB
Weight20000 g
Width517 mm
Depth327 mm
Height383 mm
show more

Can't find the answer to your question in the manual? You may find the answer to your question in the FAQs about the Bosch GCD 12 JL below.

What is the weight of the Bosch GCD 12 JL?

The Bosch GCD 12 JL has a weight of 20000 g.

What is the best way to clean my saw blade?

1. Wipe sawdust from the saw blade with a brush. 2. Spray the saw blade with oven cleaner and leave for 30 minutes. 3. Remove the oven cleaner and dirt with a dry cloth. 4. Grease saw blade with Vaseline.

My saw blade is blunt. What now?

If there is resin or other debris on the blade, it may look like the blade is blunt. If the saw blade has been thoroughly cleaned and is still blunt, it is recommended to have the saw blade sharpened.

How do I remove rust from my Bosch saw?

1. Soak the rusty part in vinegar until completely soaked through. 2. Let the vinegar work on the rust for 24 hours. 3. Remove the rust with a wire brush or aluminium foil.

What does '16V' or '20V' mean?

The maximum achievable charge level is expressed with 16V or 20V. The V in this case stands for Volt.

Do I have to wear hearing protection when using a saw?

The amount of sound varies a lot per brand and type of saw, it is therefore wise to wear hearing protection to be sure.

What is the height of the Bosch GCD 12 JL?

The Bosch GCD 12 JL has a height of 383 mm.

What is the width of the Bosch GCD 12 JL?

The Bosch GCD 12 JL has a width of 517 mm.

What is the depth of the Bosch GCD 12 JL?

The Bosch GCD 12 JL has a depth of 327 mm.

How do I adjust the bevel angle on the Bosch GCD 12 JL?

To adjust the bevel angle on the Bosch GCD 12 JL, locate the bevel adjustment knob located on the side of the saw. Turn the knob clockwise to increase the bevel angle and counterclockwise to decrease it. Make sure to firmly tighten the knob after adjusting the angle to secure it in place.

What is the maximum cutting depth of the Bosch GCD 12 JL?

The Bosch GCD 12 JL has a maximum cutting depth of 12 centimeters when used with a suitable blade. Ensure that you have a proper blade installed and adjusted for optimal performance.

How can I change the blade on the Bosch GCD 12 JL?

To change the blade on the Bosch GCD 12 JL, first, disconnect the saw from the power source. Locate the blade change lever on the front or side of the saw, depending on the model. Push or pull the lever to release the blade lock mechanism and carefully remove the old blade. Insert a new blade of the appropriate size and ensure it is properly secured before using the saw.

How do I align the laser guide on the Bosch GCD 12 JL?

To align the laser guide on the Bosch GCD 12 JL, adjust the laser alignment screws located near the laser module. Gradually adjust these screws until the laser beam coincides with the desired cutting line, ensuring accuracy and proper alignment. Use caution and follow safety guidelines when operating the laser guide.

How do I clean and maintain the Bosch GCD 12 JL?

To clean and maintain the Bosch GCD 12 JL, start by disconnecting it from power and removing any sawdust or debris from the blade guard, baseplate, and other accessible parts using a brush or vacuum. Check the power cord for any damages or fraying and ensure it is in good condition. Additionally, regularly lubricate the moving parts and check the blade for sharpness or signs of wear. Following these steps will help maintain the performance and longevity of your saw.

What is the input power of Bosch GCD 12 JL?

The input power of Bosch GCD 12 JL is 2000 W. This means it has a high power output, which allows for efficient cutting.

What is the idle speed (max) of Bosch GCD 12 JL?

The idle speed (max) of Bosch GCD 12 JL is 1500 RPM. This indicates that the saw has a relatively high speed, making it suitable for fast and precise cutting tasks.

What is the blade diameter of Bosch GCD 12 JL?

The blade diameter of Bosch GCD 12 JL is 305 mm. This large blade diameter enables the saw to make deep cuts and handle larger materials.

What is the blade bore of Bosch GCD 12 JL?

The blade bore of Bosch GCD 12 JL is 30 mm. This standard bore size ensures compatibility with a wide range of blades, allowing for versatility in cutting applications.

Does Bosch GCD 12 JL come with a saw blade included?

Yes, Bosch GCD 12 JL comes with a saw blade included. This saves the user from the hassle of purchasing a separate blade and adds value to the product.

Is the manual of the Bosch GCD 12 JL available in English?

Yes, the manual of the Bosch GCD 12 JL is available in English .

Is your question not listed? Ask your question here

No results