View the manual for the Bosch GBH 240 Professional here, for free. This manual comes under the category drill machines and has been rated by 1 people with an average of a 7.5. This manual is available in the following languages: English. Do you have a question about the Bosch GBH 240 Professional or do you need help? Ask your question here
The Bosch GBH 240 Professional is a drill machine designed for professional use in construction and renovation projects. This drill machine offers reliable and durable performance, making it a valuable tool for various applications. The Bosch GBH 240 Professional features a powerful motor that delivers high impact energy for efficient drilling and chiseling. With its robust construction and premium materials, this drill machine is built to withstand tough working conditions and provide long-lasting performance. Equipped with a SDS-plus chuck, the Bosch GBH 240 Professional allows for quick and tool-free bit changes, enhancing productivity and convenience on the job site. The drill machine also features a rotation stop mode for light chiseling tasks, further expanding its versatility. The Bosch GBH 240 Professional offers variable speed control, allowing users to adjust the drilling speed according to the application requirements. This feature ensures precision and accuracy in a wide range of materials. With its ergonomic design and low vibration levels, this drill machine offers improved user comfort and reduced fatigue during prolonged use. The Bosch GBH 240 Professional also features an integrated impact attenuating system, further enhancing user safety. Overall, the Bosch GBH 240 Professional is a reliable and durable drill machine that delivers high-performance results. Whether you are a professional contractor or a DIY enthusiast, this drill machine is a valuable tool for achieving efficient and precise drilling outcomes.
| Brand | Bosch |
| Model | GBH 240 Professional |
| Product | drill machine |
| Language | English |
| Filetype | User manual (PDF) |
Can't find the answer to your question in the manual? You may find the answer to your question in the FAQs about the Bosch GBH 240 Professional below.
1. Soak the rusty part in vinegar until completely soaked through. 2. Let the vinegar work on the rust for 24 hours. 3. Remove the rust with a wire brush or aluminium foil.
The maximum achievable charge level is expressed with 16V or 20V. The V in this case stands for Volt.
The amount of sound varies a lot per brand and type of drill machine, it is therefore wise to wear hearing protection to be sure.
To troubleshoot if the Bosch GBH 240 Professional drill machine is not hammer drilling effectively into concrete, brick, or stone, follow these steps: 1. Check the drill bit: Ensure that you are using the correct type and size of drill bit for the material you are drilling into. Make sure the drill bit is sharp and in good condition. Replace the drill bit if it is worn or damaged. 2. Adjust the drilling mode: Set the operating mode of the drill machine to "hammer drilling" for concrete, brick, or stone. Refer to the manual for instructions on how to change the operating mode. Make sure to switch off the power tool before changing the mode. 3. Apply proper pressure: Apply firm and consistent pressure while drilling. Avoid excessive force, as it may cause the drill bit to bind or overheat. Let the drill bit do the work and allow it to penetrate the material gradually. 4. Optimize drilling speed: Adjust the speed/impact rate of the drill machine based on the hardness of the material. Start with a lower speed and gradually increase it if needed. Applying light pressure to the on/off switch results in a lower rotational speed/impact rate, while increasing pressure increases the speed/impact rate. 5. Clear debris: Periodically stop drilling to clear any debris or dust that may accumulate in the drill hole. This will help maintain effective drilling performance. Remember to always wear appropriate personal protective equipment, such as safety glasses and ear protection, when operating the drill machine.
To securely hold the drill bit in the keyless quick-change chuck of the Bosch GBH 240 Professional drill machine, follow these steps: 1. Insert the keyless quick-change chuck: Hold the retaining ring of the keyless quick-change chuck firmly in place. Open the tool holder by turning the front sleeve until the tool can be inserted. Hold the retaining ring in place and firmly tighten the front sleeve by turning it in the direction indicated until you hear it click into place. 2. Check the secure seating: After inserting the drill bit, check that it is seated securely by pulling on the tool. Ensure that there is no wobbling or movement of the drill bit within the chuck. 3. Adjust if necessary: If the tool holder was unscrewed all the way and does not fully tighten, turn the front sleeve in the opposite direction to the arrow by one full turn. This will allow the tool holder to be fully tightened. 4. Remove the drill bit: To remove the drill bit, hold the retaining ring of the keyless quick-change chuck firmly in place. Open the tool holder by turning the front sleeve in the direction indicated until the tool can be removed. By following these steps, you can ensure that the keyless quick-change chuck of the Bosch GBH 240 Professional drill machine securely holds the drill bit during operation.
To troubleshoot if the Bosch GBH 240 Professional drill machine is not rotating in the desired direction (clockwise/anticlockwise), follow these steps: 1. Ensure power is off: Before making any adjustments, ensure that the power tool is switched off and unplugged from the power source. 2. Locate the rotation switch: Locate the rotation switch on both sides of the drill machine. It is usually labeled with arrows indicating the direction of rotation. 3. Set desired rotation direction: To rotate the drill machine in the clockwise direction, turn the rotation switch on both sides to the maximum position indicated by the arrow pointing to the right. To rotate in the anticlockwise direction, turn the rotation switch on both sides to the maximum position indicated by the arrow pointing to the left. 4. Test the rotation: After setting the desired rotation direction, switch on the power tool and test if it rotates in the intended direction. If it still does not rotate as desired, repeat steps 2 and 3 to ensure the rotation switches are properly set. By following these steps, you can troubleshoot and adjust the rotation direction of the Bosch GBH 240 Professional drill machine according to your needs.
To properly release the drill bit from the SDS plus quick-change chuck of the Bosch GBH 240 Professional drill machine, follow these steps: 1. Ensure power is off: Before attempting to release the drill bit, ensure that the power tool is switched off and unplugged from the power source. 2. Locate the release button: On the SDS plus quick-change chuck, locate the release button. It is usually located near the top of the chuck. 3. Press the release button: Firmly press and hold the release button while gently pulling the drill bit out of the chuck. The release button will disengage the locking mechanism, allowing the drill bit to be released. 4. Remove the drill bit: Once the locking mechanism is disengaged, continue pulling the drill bit out of the chuck until it is fully released. 5. Insert a new drill bit: To insert a new drill bit, align the shank of the bit with the chuck and firmly push it into the chuck until it locks into place. Ensure that the drill bit is securely seated in the chuck before using the power tool. By following these steps, you can properly release the drill bit from the SDS plus quick-change chuck of the Bosch GBH 240 Professional drill machine and insert a new drill bit for your drilling needs.
To troubleshoot excessive noise or vibration during hammer drilling or chiselling with the Bosch GBH 240 Professional drill machine, follow these steps: 1. Check the drill bit: Ensure that the drill bit is sharp and in good condition. Worn or damaged drill bits can cause excessive vibration and noise. Replace the drill bit if necessary. 2. Verify proper installation: Make sure the drill bit is securely inserted into the SDS plus tool holder. Ensure that it is properly seated and locked in place. If the drill bit is not inserted correctly, it can cause vibration and noise during operation. 3. Adjust drilling technique: Use the appropriate drilling technique for the material being drilled. Apply steady and consistent pressure without forcing the drill. Let the drill bit do the work and avoid excessive pressure, as it can lead to increased vibration and noise. 4. Check for loose components: Inspect the drill machine for any loose components, such as the auxiliary handle or dust protection cap. Tighten any loose parts to minimize vibration and noise. 5. Maintain the drill machine: Regularly clean and lubricate the drill machine according to the manufacturer's instructions. Proper maintenance can help reduce vibration and noise levels. By following these steps, you can troubleshoot and minimize excessive noise and vibration during hammer drilling or chiselling with the Bosch GBH 240 Professional drill machine.
Yes, the manual of the Bosch GBH 240 Professional is available in English .
Is your question not listed? Ask your question here
No results
Need help?
Do you have a question about the Bosch and is the answer not in the manual?
Question and answer
Number of questions: 0